Flounder's X52 Pro Keyfile/DX Profile for BMS 4.33
-
Really it’s yours. All I did was remap a few buttons!
I understand and I’m saying the same thing …. in reverse … you set it up, tested it, etc.
Regardless, once you’ve got it where you want it, we can repost it and host it somewhere so other can use it if they wish.
-
Hi Agave_blue,
Is the Pinkie switch also working like the normal Pinkie (ie zoom for TGP) on real F16 or is it only the shift function?
Pierre
-
Hi Agave_blue,
Is the Pinkie switch also working like the normal Pinkie (ie zoom for TGP) on real F16 or is it only the shift function?
Pierre
It is FOV on short press (FCR=>Norm/EXP/DBS1/DBS2; TGP=>Wide/Naro; Mav=>Norm/EXP; etc.); Hold = DX Shift.
I’ve updated the pinky description in the stick picture in post #1 for clarity.
The two commands are:
- SimHotasPinkyShift …. this is the one that acts as FOV on short press and DX Shift when held, and;
- SimPinkyShift …. this is the one that is DX Shift only.
-
Hi Agave_Blue.
I am learning Falcon with your profile and i want to turn on the HMCS display but I cannot see how activate it.Is this programmed in your profile?
Thank you. -
Hi Agave_Blue.
I am learning Falcon with your profile and i want to turn on the HMCS display but I cannot see how activate it.Is this programmed in your profile?
Thank you.I use the knob in the 3D pit (Left forward panel, just below the Chaff/Flare/EWS panel).
However, to directly answer your question, Yes, there is a keypress in the profile. Check post #1, the keyboard layout. It is ‘CTRL-[’ to decrease and ‘CTRL-]’ to increase HMCS brightness.
-
Thanks for your profile, I like it very much! But it is possible to use this Software “Two tablet cockpit extractor for Android” with your profile? All keys on the Tablets don´t Funktion. Is it possible to fix it? Since two days I try to change it. Unfortunately without success I’m still not so fit to work with the Keyeditor and SST
Big Thanks for your Support!
Sebi -
Thanks for your profile, I like it very much! But it is possible to use this Software “Two tablet cockpit extractor for Android” with your profile? All keys on the Tablets don´t Funktion. Is it possible to fix it? Since two days I try to change it. Unfortunately without success I’m still not so fit to work with the Keyeditor and SST
Big Thanks for your Support!
SebiSorry, but I’m not familiar with that app or how it uses the BMS keyfile.
-
Thank you Blue , quick question, will this profile work OK, with BMS 4.32, I have used it and have a couple issues which may be my install just checking!
I am flying with 4.33 but it is unstable some times, the frame rate is not real high even at 32 bit so may use older version to get up to speed until I can upgrade.
tux -
Thank you Blue , quick question, will this profile work OK, with BMS 4.32, I have used it and have a couple issues which may be my install just checking!
I am flying with 4.33 but it is unstable some times, the frame rate is not real high even at 32 bit so may use older version to get up to speed until I can upgrade.
tuxHmmmm …. not 100% sure. Some callbacks changed in 4.33 … not many, but a few. It’s possible that one or more of those are included in this keyfile and they would not function correctly in BMS 4.32. That said, I think all of the HOTAS commands should be ok, it would likely be a few keyboard commands that don’t work.
Another alternative is to download my 4.32 DX Profile and use that in 4.32. HOTAS layout is very nearly identical. Keyboard layout is similar for ICP, OSB’s, etc., but contains a lot more default keys as well.
-
Could you to take the time to redo your Key file on your key file V 3 without the tracker, view settings as 4.33 for BMS 4.32 DX, I have been trying but have it all messed up, hate to ask you again. Need a key file editor for dummies!
tux -
Blue, made some changes in game ,using key file you made before no tracker, sorry to bother you! All is good for now!
Keep up the good work, your help is always appreciated!
tux -
Blue, made some changes in game ,using key file you made before no tracker, sorry to bother you! All is good for now!
Keep up the good work, your help is always appreciated!
tuxOk, thanks for posting. I was going to look at sometime this weekend.
-
“Give a man a fish and he will eat for a day. Teach a man how to fish and he will eat for life”
-
I am trying to set up the Padlock as you describe, when you say paste the key file in External Views, is this in the" Keyfile Editor". I see external views in the editor, but in previous Falcon sim’s there was usually only one button to go into padlock, your code file above shows numerous padlock step lines. Wondering do I use just Padlock next and Padlock Previous .??
I am learning to use the editor and this is a little over my head as shown. I can manage to set it up in the UI once I get it in the right spot in the editor.
I am using BMS 4.33 ,
thanks Tux. -
Tux,
Try Using the excel file editor by Kolbe that comes with the 4.33 tool files. It is a lot easier to use. All you have to do is read the directions and you will end up with a .key file that is yours and yours only. This way is the one way I have found out to get to know the BMS keystrokes since I am the one mapping them. -
Will take a look at the Kolbe file. Wondering what stick you are using, with my set up there are so many buttons just thinking it will take forever to set it up, there are so many multiple combinations. I was thinking just make some changes only. If my combo had just a few buttons would be easier. I have been studying the editor and not as intimidated as in the beginning.
Pikachu, do you have a tracker set?
thanks for the feedback,
tux -
This post is deleted! -
I used your suggestion and can make the changes I wanted, using BMS Full, it has the files I couldn’t find and apply in other profiles.
thanks
tux -
Sorry for the late responce tux139.
I Use TrackIR4. There is a newer version but it is more expensive. I don’t know if its better. TrackIR4 works great for me. In the begining, like everthing you have to get used to it. But once you start using it, you will realise that you can interact with the 3D pit almost without taking your hands off the HOTAS. That’s why I was recomending for you to get to know your own .key file. The better you know it the more intimate you become with all the buttons on it. You get a double set of additional buttons with the shifted option as well.
Pika out -
Does this work with bms 4.33.1?