HOTAS Cougar Vs Windows 10
-
TM HOTAS Cougar in Win 10 user here also with FOXY and CCP installed (No TARGET).
Before update from Win7x64 to Win10 my Cougar was working perfect.
After the Win10 update no more DX buttons recognition.
Same installation, same profile in my pc.I didn’t manage to solve it yet.
-
This post is deleted! -
Really? Make sure you are using “2007_HCO_VISTA_64RC1” and run the installation with administrator rights.
Double checked and even foxy I run it with admin rights.
It needs more investigation at my end to say it for sure what the issue is.
I will keep you posted about results.
Thanks Brisse. -
Well I would like to chgime in, when I upgraded to Win 10 64bit, I was unable to flash my Cougar… I am unsure if I would want to upgrade yet but I need to for some other reasons. has anybody been able to flash their Cougar with Win10-64bit??
-
My Cougar/FCC3 on Win10 Pro no Problems follow the instruction.
-
My Cougar/FCC3 on Win10 Pro no Problems follow the instruction.
YES, I understand how to INSTALL the Software. but try and FLASH the Cougar on Win 10 is what I am trying to find out as it did not work before and I was wondering if it is fixed or going to get fixed soon??
-
YES, I understand how to INSTALL the Software. but try and FLASH the Cougar on Win 10 is what I am trying to find out as it did not work before and I was wondering if it is fixed or going to get fixed soon??
Yes, I have been able to flash my unmodded Cougar with Win 10/64 using the normal procedures (unplug, then plug back in with trigger depressed for a few seconds). I have done it on at least two occasions since installing Win 10/64.
-
Yes, I have been able to flash my unmodded Cougar with Win 10/64 using the normal procedures (unplug, then plug back in with trigger depressed for a few seconds). I have done it on at least two occasions since installing Win 10/64.
Well that is hopefull. I might jump back into win 10 maybe??
-
I recently installed win 10 on my Mac via bootcamp problem free. I programmed the cougar directly in BMS. I’m a novice, so there was a lot of trial and error, but I eventually got it done. I just installed 4.33 yesterday, and it runs fine.
-
hey guys
has anyone encountered a device detection error after the installation?edit-disregard
-
help ! running win10, unable to open 2007_HCO_VISTA_64RC1 , indicating CPU missing STTubeDevice203.dll .
when using 3_HCO_2004 everything seems to work using Dunc’s profile in Foxy except microstick and unable to manually calibrate cougar ( option in CCP / 3_HCO_2004 not available ) .( been searching and reading BMSforum but no joy )
question : 1) should i try and resolve issues and stay with Win10 ?
2) go back to Win7
3) go back and play PacMan due to frustration ?thanks in advance and cheer !
-
help ! running win10, unable to open 2007_HCO_VISTA_64RC1 , indicating CPU missing STTubeDevice203.dll .
when using 3_HCO_2004 everything seems to work using Dunc’s profile in Foxy except microstick and unable to manually calibrate cougar ( option in CCP / 3_HCO_2004 not available ) .( been searching and reading BMSforum but no joy )
question : 1) should i try and resolve issues and stay with Win10 ?
2) go back to Win7
3) go back and play PacMan due to frustration ?thanks in advance and cheer !
I’m sure this has been asked before.
On 64 bit systems the DLL is installed in the wrong place and needs copying to the correct one. Off the top of my I can’t remember which directories though (currently at work). Do a search on the forums using the DLL name and you should get a result. If not hopefully a helpful soul will come by with the missing info.
-
ok thanks
-
Download Sttubedevice203.dll file from here: Habu’s Dropbox
Install it here: C:\Windows\SysWOW64
-
Download Sttubedevice203.dll file from here: Habu’s Dropbox
Install it here: C:\Windows\SysWOW64
Thank you Habu_ will do and update !
-
Sorry. Try this. If this does not work, try to Google it.
-
Sorry. Try this. If this does not work, try to Google it.
update: went to Control Panel/ Device Manager and update my cougar driver from C drive, everything working perfect ( so far) . Did not have to reinstate Sttubedevice203.dll
Thank you so much for helping, I am airborne ! she looking amazing with NVDIA 980/win10/ 4k monitor. thank to all for all the hard work, she is beautiful ! -
Congratulations on getting everything working and welcome to this passionate community. Watch out! BMS 4.33 can become addictive.
-
so far so good here as well, figured a positive note cant hurt! -
-
Hi guys, judging by this thread, some have had success with Win10 regarding the TM HOTAS Cougar. To facilitate a (manual) throttle calibration, I decided to download Foxy.
As per instructions at ‘Cougar Flyfoxy’, I cleared the TM firmware from the stick (to make way to input new firmware to the stick)……[note: no software came with the stick]
……
Attempting to download TM firmware to the stick with the HOTAS Cougar Update function, I encounter the following …… (the flightstick is connected, btw)
…………
I’m thinking that the problem has to do with the ‘Thrustmaster HOTAS Cougar’ device status given by Win10, which is displayed with a warning label and with two status messages … 1.) Needs troubleshooting……2.) Driver is unavailable
……
Problem is, when I try to apply the fix (as provided for by Win10), I encounter messages telling me the drivers for this device are not installed … and … that there are no drivers for this device (verified on the TM site there are no drivers required).
…………
Does this mean then that I am unable to flash my stick after having just cleared it? lol … help!