Lightning's MFDE and 4.33
-
Have you tried running MFDE as admin? That did it for me.
Guys I have a new very big problem with mfde v 6.1.1 and also 6.1.0.
Now the program, after opening, does not work at all.
The icon appear on the windows taskbar but nothing happends.
I try to click on program options after a mouse right-click on the icon, but nothing happends.PLEASE can some one HELP me ? =(
-
Guys I have a new very big problem with mfde v 6.1.1 and also 6.1.0.
Now the program, after opening, does not work at all.
The icon appear on the windows taskbar but nothing happends.
I try to click on program options after a mouse right-click on the icon, but nothing happends.PLEASE can some one HELP me ? =(
I had the same issue if AVG notified me as false positive for a trojan horse.
You need to kill the exe process, open AVG, add the MFDE folder to the exceptions of AVG scanning, then restart MFDE and it should work fine -
I had the same issue if AVG notified me as false positive for a trojan horse.
You need to kill the exe process, open AVG, add the MFDE folder to the exceptions of AVG scanning, then restart MFDE and it should work fineThank you very much !!! you’re right…
Now also AVIRA detect these false positive, before notThanks again… ^^
have you any info about HOW works MFDE with falcon bms in fullscreen mode ? -
Flawless.
Just do not forget to place the additonal gauge monitors over the main monitor in the windows display settings.
-
Thank you very much !!! you’re right…
Now also AVIRA detect these false positive, before notThanks again… ^^
have you any info about HOW works MFDE with falcon bms in fullscreen mode ?no idea, with me that worked in 4.32. Haven’t tried it in 4.33 because the MFD’s of MFDE are way too laggy in the latest 2 versions and I’m in windowed mode because I’m currently back to using BMS extraction for DED/RWR/MFDs and only use MFDE for the other stuff.
-
Works great for me in fullscreen. Some have issues with the instruments changing position when the UI goes 1024 x 768 in FS. To fix that just make the monitor with the instruments position in the first position in screen resolution.
-
Works great for me in fullscreen. Some have issues with the instruments changing position when the UI goes 1024 x 768 in FS. To fix that just make the monitor with the instruments position in the first position in screen resolution.
Sorry iceburg, what you means exactly ?
If my configuration is :
Main: Philips monitor 226V4 1920x1080 res
2x Usb Samsung U70 with displaylink drivers 7.7.60366.0 version 800x480 reswhen i go to screen resolution options obviuosly the main is 1 and the other mini-monitors are recognised as 2 and 3….
What I have to do to solve?
-
When you are in display properties you can rearrange the displays. Move the two small screens ABOVE the main screen and to the left edge.
So the small screens will be anytime on the 0,0 coordinates and won’t be affected by the resolution switching.
-
When you are in display properties you can rearrange the displays. Move the two small screens ABOVE the main screen and to the left edge.
So the small screens will be anytime on the 0,0 coordinates and won’t be affected by the resolution switching.
ah, undestand, but my problem is the small resolution of the instrument monitors.
I cant work with such that small screen as main =( -
Maybe prevent the resolution switching by changing some windows or video card parameters can have the same result ?
What do you think about?I will search a way to do it and come back with the feedback
-
Just to butt in, i had to edit mfde’s config manually to get a proper size for mfd windows. manual resize didn’t work for some reason. 0-6-1-1 here.
-
ah, undestand, but my problem is the small resolution of the instrument monitors.
I cant work with such that small screen as main =(No, you STILL use the bigger monitor as main screen! The one screen in the upper left corner must NOT be the main monitor.
I use three 27" monitors (connected as one big screen via Eyefinity) one 24" touch screen and one 22" monitor displaying MFDE. The 24" is arranged in the upper left corner, right from him the 22" and then below them the 3-screen-Eyfinity group which is still the main screen.
-
No, you STILL use the bigger monitor as main screen! The one screen in the upper left corner must NOT be the main monitor.
I use three 27" monitors (connected as one big screen via Eyefinity) one 24" touch screen and one 22" monitor displaying MFDE. The 24" is arranged in the upper left corner, right from him the 22" and then below them the 3-screen-Eyfinity group which is still the main screen.
I try almost all possibile screen configuration, but result is always the same …
Windowed falcon --> MFDE working
Fullscreen falcon —> MFDE BLANKplease check the combination I try and let me know if yours is different =(
https://i.imgsafe.org/b93f2e2.png
https://i.imgsafe.org/bb44bc0.png
https://i.imgsafe.org/bc12c4e.pngMy usual disposition:
https://i.imgsafe.org/b69d861.pngPS…
Dragging the screen I notice that the real (0,0) position is always the one on the screen set as main…
if for example you look at these:
https://i.imgsafe.org/b93f2e2.png
the upper left corner is (-800,0) because 800 is the horizontal resolution of my lcd monitors…. -
Hi Captain Muplex,
take care that if you switch to windows desktop from falcon when in PIT, falcon it stop to share the MFDs graphics area and MFDs it stop to work. This it doesn’t happen in Falcon windows mode.stay in touch in AMVI TS
S.ten. Ares
-
what it happen to me is just a little bit different.
I installed MFD and it worked for a week, than it stop to work.
I’m using it in a client mode configuration an what is happening is tha the server is stopped to send data to client, but it work fine in standalone and client mode.
I have the Antivirus and firewall disabled, i try to uninstall and to reinstall deleting appdata and register data. NOTHING.
it is installed on standard release of Windows 10 but also client is on W10 (and in worst situation because it is using the insider version).As i can see from Process monitors programs and TCP viewer that MFD in server mode doesn’t open TCP port and doesn’t star to listening on it…but it does it in client mode !!!
there is no way to debug program, i set de lo4net to ALL in config file but no message has been wrote on the log file.If i restore windows from a old recovery point it works again for a week without any evident windows upgrade
-
please check the combination I try and let me know if yours is different =(
https://i.imgsafe.org/bc12c4e.pngThis arrangement is the right one, i have a similiar one and i can confirm that this one will work perfect with BMS eather windowed or full screen.
-
All,
I’ve read every post in the thread and similar threads. 0.6.1.1 starts (as in, goes to the system tray when I run the .exe), but when I click on it in the tray to access options and set gage positions, nothing happens. I’ve used earlier versions with 4.32 no problem. I’m trying to run 0.6.1.1 with BMS 4.33. I’ve done the following:
1. Running as admin. I’m running windows 8 so “disable visual themes and desktop composition” aren’t options to disable.
2. Installed to the root C directory.
3. Uninstall/Reinstall and cleaned out the registry between installs.
4. Click and waited forever as some here have suggested it is just slow.
5. Re-booted and tried running MFDe straight away (in an attempt to get it to start before the computer forgot it didn’t know how.)
6. Tried re-installing an old version 0.5.7.0, deleted folder without installing and installed 0.6.1.1 on top of it to same folder (as suggested in this thread). While 0.5.7.0 was installed, I did click on it to verify I could open settings, and I could.
7. Pulled lots of hair out.Any suggestions? Thanks in advance!
Windows 8 (don’t ask… I’ve tried to upgrade), i7-4770 @ 3.4 GHz, 8GB RAM, 64-bit, 2 monitors with one setup as a touchscreen for HELIOS.
-
Have you tried v0.6.1.0? I had the same issues with v0.6.1.1 but the previous version works just fine.
-
Mfde does not update the mfd screens if I switch to windows and switch back to the sim. The gauges are working fine. Is this a bug in bms or mfde?
-
Mfde does not update the mfd screens if I switch to windows and switch back to the sim. The gauges are working fine. Is this a bug in bms or mfde?
Try restarting the sever. I don’t think it wold like alt tabbing out while you are in 3D.