Morphine's Profile
-
Does anyone have a copy of the latest ver of the profile please Morphs page says not up to date get from others.
So are there any OTHERS out there with the latest ver please -
Does anyone have a copy of the latest ver of the profile please Morphs page says not up to date get from others.
So are there any OTHERS out there with the latest ver pleaseI “think” this is the last updated one. It’s in this same thread just ~10-15 pages back.
https://www.benchmarksims.org/forum/showthread.php?8147-Morphine-s-Profile&p=340494&viewfull=1#post340494 -
Thanks for that . Wasn’t sure it was right one with it being older than when the 4.33u2 was released just going through the updates to get the LED’s working
-
This is my version which works in 4.33U2. It also uses the new QWERTY US/Int keyboard layout which was introduced in 4.33. The Original Morphine’s profile used a version of Dunc’s keymap. This was missing some of the new key functions implemented in the latest versions of BMS. a PDF Keyboard layout is included in the dropbox. The throttle afterburner lights work too. Just make sure to set the proper order in devicesorting.txt
link to dropbox of profile ect.
https://www.dropbox.com/sh/4l2j2sbbkkmwoaa/AAAMks8YYDvUsOQ6vr7bi5bia?dl=0 -
Thanks for that Makes more sense now.
I’m just dipping my toe into the waters of target software trying to workout if it’s possible to do a second function on the CMS right in the GUI editor for a if you hold the key for say 2sec you get another key press.
I hope that makes sense I have read the basic manual but carn’t find or just plain missed it I think it is a H or hold function but would be grat if somone could point me in the right direction of what to read and where to read If I can uderstand how it works then I think I can do the rest but very new to the whole scripting thing any help would be great -
I don’t know how to do it in the GUI editor but the script command is TEMPO. The GUI is simply a pretty interface for automatically writing a (an ugly) script. You could extract the auto-generated script from the GUI and manually edit in the TEMPO command but probably there is a way to do it in GUI directly.
-
Ok I Think I may be going a little mad I have loded the keyfile and the script set the script running first then load up falcon. Now this is where it gets fun I’m using the files found above.
Most of the throttle works great but my stick no not so I have no TMS DMS CMS functions or trigger etc and no shift function either!!!
AM i BEING DUMB??? I HAVE HAD A LONG LAY OFF FROM FLYING REGULAR BUT IS THE A COSMIC BLOODY FORCE TELLING ME I’M NOT MENT TO FLY
Right rant over sorry. I have a warthog and falcon patched upto U2. This should be easy people keep telling me All I want to do is fly online with friends but without my keys working I dont want to waste other peoples flying time trying to get me up and running.
Someone please help this is getting me to the point of going to DCS but F4 is my true love -
Ok I Think I may be going a little mad I have loded the keyfile and the script set the script running first then load up falcon. Now this is where it gets fun I’m using the files found above.
Most of the throttle works great but my stick no not so I have no TMS DMS CMS functions or trigger etc and no shift function either!!!
AM i BEING DUMB??? I HAVE HAD A LONG LAY OFF FROM FLYING REGULAR BUT IS THE A COSMIC BLOODY FORCE TELLING ME I’M NOT MENT TO FLY
Right rant over sorry. I have a warthog and falcon patched upto U2. This should be easy people keep telling me All I want to do is fly online with friends but without my keys working I dont want to waste other peoples flying time trying to get me up and running.
Someone please help this is getting me to the point of going to DCS but F4 is my true loveHave you edited your devicesorting.txt in your BMS install? The thrustmaster combine needs to be at the top of the list.
-
Hi all
Having fun with the Profile Files Gastone Provided in the dropbox Link.
Works great for me in the “mud moving” process.
I have Two Quick Question regarding A-A duty:
1. Is there a Hotas Function for Switching RWS to TWS, or that OSB Button?
2. IS there a Hotas Function for FCR Range, or are we all used to slew the Radar cursor to up and down boundaries to switch?Thanks in advance
Foss -
Hi all
Having fun with the Profile Files Gastone Provided in the dropbox Link.
Works great for me in the “mud moving” process.
I have Two Quick Question regarding A-A duty:
1. Is there a Hotas Function for Switching RWS to TWS, or that OSB Button?
2. IS there a Hotas Function for FCR Range, or are we all used to slew the Radar cursor to up and down boundaries to switch?Thanks in advance
Foss1: see TO BMS1-F16CM-34-1-1 page 16, TMS right for more than 1 second.
2: no, slew the cursor or use the MFD button like in RL.Send from my Xperia X using Tapatalk
-
EDIT: I fixed the throttle lights, all appears fine for latest version of target while running Warthog_BMS_Full_2_Tpedal.tmc script. Will keep both verison of the script for legacy versions of target. See post below
FYI: Target Version 3.0.16.615 (the latest as of 11/23/16) is a bit buggy in regards to the current version of the script. You should only need to run this version of target if you have the new TFRP pedals, TWCS throttle or the new T.16000M FCS and you need to run a target script in other games. If you do not need any of those functions I highly advise not updating target till a patch comes out. I can confirm that version 1.011.304 works fine.
I have added a new target script to work around the bugs in target for people with the TFRP pedals. The script is called Warthog_BMS_Full_2_Tpedal.tmc and will be found in the dropbox hosting the current working version. Link below
There are still two issues though. The first is that lights indicating the afterburner position will not work in Target 3.0.16.615. Second, The device is not called Thrustmaster Combine, It’s now label in the system as “thrustmaster virtual (root)”, this should be placed at the top of devicesorting.txt. Please let me know if there are any issues running this version of the script and I will do my best to work them out.
Link to the Dropbox: https://www.dropbox.com/sh/4l2j2sbbkkmwoaa/AAAMks8YYDvUsOQ6vr7bi5bia?dl=0
-
I’ve been using 3.0.16 since I came back to BMS (with a new rebuilt Win10 system) and the only issues I’ve seen I thought were due to BMS. Good to know it’s thrustmaster related.
Regarding the afterburner lights, they worked for me, but there didn’t seem to be an accurate relationship between each light step and afterburner position. -
FYI: Target Version 3.0.16.615 (the latest as of 11/23/16) is a bit buggy in regards to the current version of the script.
So I fixed the TFRP Rudder script so that the afterburner lights function as morphine intended with the latest version of target. Tested in 4.33u2 and all functions work. Though the thrustmaster virtual device is still called “thrustmaster virtual (root)”. Select this as your primary device in game and place this at the top of devicesorting.txt, load the keyfile from the drop box in game and setup your axis. You’ll probably have to set the rudder to keyboard as by default it wants to set the throttles there. Same dropbox as above should work.
-
Gastone, I just loaded your new files and works excellent!!. Just one request. I want to use the “PADDLE SWITCH” as Wheel Brakes (k). In march 20th (2012) Morphine wrote that can be done by replace in the Warthog_DX.key:
Paddle/S4 (…and so on…)
SimAPOverride 3 -1 -2 0 0x0 0
by
Paddle/S4 (…and so on…)
SimWheelBrakes 3 -1 -2 0 0x0 0
When I edit your file :BMS_Full_&Morphine.key to make that change I discovered that yours and morphine are not similar, so I am not sure how to follow. Can you please let me know what lines I should add or delete in your BMS_Full&_Morphine.key to use the “PADDLE SWITCH” as Wheel Brakes (k)
Thanks in advance
-
Gastone, I just loaded your new files and works excellent!!. Just one request. I want to use the “PADDLE SWITCH” as Wheel Brakes (k). In march 20th (2012) Morphine wrote that can be done by replace in the Warthog_DX.key:
Paddle/S4 (…and so on…)
SimAPOverride 3 -1 -2 0 0x0 0
by
Paddle/S4 (…and so on…)
SimWheelBrakes 3 -1 -2 0 0x0 0
When I edit your file :BMS_Full_&Morphine.key to make that change I discovered that yours and morphine are not similar, so I am not sure how to follow. Can you please let me know what lines I should add or delete in your BMS_Full&_Morphine.key to use the “PADDLE SWITCH” as Wheel Brakes (k)
Thanks in advance
Edit line 1161, change the callback from SimAPOveride to SimWheelBrakes.
-
Thanks Gastone!!! it works perfect,
-
Hello!
Long time gone, looking to get back into the sim
Thanks for your work Gastone! I have one small question: is there anything I need to change in the profile if I do not have rudder pedals? (I only have the Warthog…so sad…)
Thanks in advance!
-
I get the following message when I run the scrip in the editor. I don’t remember seeing this before. Is this something new? It does appear the script is running okay.
USB HID device with hardware id “VID_044F&PID_B10A” cannot be found
USB HID device with hardware id “VID_044F&PID_B687” cannot be found
USB HID device with hardware id “VID_044F&PID_B679” cannot be foundRunning a Warthog and Saitek Combat Pro Rudders
-
I get the following message when I run the scrip in the editor. I don’t remember seeing this before. Is this something new? It does appear the script is running okay.
USB HID device with hardware id “VID_044F&PID_B10A” cannot be found
USB HID device with hardware id “VID_044F&PID_B687” cannot be found
USB HID device with hardware id “VID_044F&PID_B679” cannot be foundRunning a Warthog and Saitek Combat Pro Rudders
That’s normal, those are the id’s for the new tfrp pedals, throttle and joystick. If u don’t have them then they can’t be excluded from the script, so it returns null, but the script keeps working. The exclusions were included to future proof the script.
For my sake what version of target are u running and what is the title of the script you’re running?
Hello!
Long time gone, looking to get back into the sim
Thanks for your work Gastone! I have one small question: is there anything I need to change in the profile if I do not have rudder pedals? (I only have the Warthog…so sad…)
Thanks in advance!
Nothing really. For convenience you may want to rebind the wheel breaks to paddle switch in the script. Just edit line 1161 in the key file, change the callback from SimAPOveride to SimWheelBrakes.
-
Okay makes sense… Was having some issues but I think it was Windows 10 and USB being weird as usual