YAME64 suite
-
Update to 1.1.0 seems to have worked fine, however on the first flight I had no mfds (other gauges worked fine).
I checked the settings and it looks like the 3d hook extraction method had been disabled, and all of a sudden I had RTT_Export…. set to 1 again in Falcon BMS,.cfg which I am pretty sure I had not enabled once I got v. 1.0.0 running.
Anyway, editing Falcon BMS.cfg and setting the RTT_ExportTextures back to 0 brought the mfds up again using the 3dhook method.
Thanks again for this great tool and the even greater support you guys provide to the community!
Uwe
-
Is the V1.1.0 an incremental installer? I’ve already installed Yame 64 on my PC. What will happen to my profile? Do i have to make a backup, than restore it into profile folder? Thank you guys, wanderful tool!!!
-
Is the V1.1.0 an incremental installer? I’ve already installed Yame 64 on my PC. What will happen to my profile? Do i have to make a backup, than restore it into profile folder? Thank you guys, wanderful tool!!!
Best to always take a Back-up of tje config file and your personal layout files.
It’s incremental. If you install over it, it will look for a config file. If there, it won’t install tje default One over it. It will overwrite all lay-outs that come with the install, but won’t delete layout files you saved under a New name. -
Perfect! Thank you!
-
Thank you very much for the 32b
A stupid question….How to Stop/Close 32b version?
-
Hey guys,
just a little heads-up if you’re also running komurcu’s excellent MFD for Android software on your tablet. AFAIK you’ll still need the RTT_ExportTextures=1 in your falcon bms.cfg or else your DEDs / RWR / MFDEs won’t display on your tablet / phone.
Maybe YAME64 could change its “warning” about the variable being set to 1 when using the 3d hook method that this setting is required for some “3rd party software”.
All the best, Uwe
-
Thank you very much for the 32b
A stupid question….How to Stop/Close 32b version?
seems to be an issue with the 32bit version. Placed in our tracker as critical bug.
-
My client screen freezes whenever I use edit gauges or windows being dragged over top of each other. The ghost window sticks to the main window and prevents further use. I have to shut down program via task manager. And it is using 40% cpu while the window sits there. The client just keeps freezing on me whenever I move stuff to other monitors. Its a real mess on my client computer.
Also, is it possible to have all the gauges show before BMS starts. I don’t want to wait until I am in the seat to see there is a problem with placing and such.
Client computer: [email protected] Ghz 8gb ram GTX 580 3gb
Hi, is this by any chance happening with the 32Bit version? Seems the x86 version has some issues with the build the x64 doesn’t have.
-
Hi, is this by any chance happening with the 32Bit version? Seems the x86 version has some issues with the build the x64 doesn’t have.
No. 64bit version. I think it has to be something to do with my Windows install, because it works fine on my main computer, but I need it to work on my secondary computer.
-
Can the HUD on client be mirrored or flipped? Just like FMFDE.
-
Can the HUD on client be mirrored or flipped? Just like FMFDE.
Not yet, but I can imagine it can be useful if you want to use it as a flat extraction to be reflected onto a real hud. Then again. I assume the screen used in the hudbox would only be used for the hud extraction and nothing else, so it’s easier to just set your screen to turn 180° in windows, or physically turn that screen around then have it as an extra feature in code
-
Stupid question, but can YAME be made to start stuff like TARGET where the program itself has to be started, a profile loaded, then “ran” to combine the stick and throttle into one virtual controller? Or stuff like FRAPS that has the UAC pop-up?
-
I’m noticing a stutter in my MFD displays every few seconds. I’m running the MFD’s on a second client machine (using hook method), and using two USB 2.0 to VGA adapter dongles to drive the MFD screens. Are these likely the cause of the stutter and would an upgrade to USB 3.0 dongles solve this (or switching to additional video cards)? My client PC motherboard is not USB 3.0 compatible, but I assume there are PCI-E cards out there that could provide the USB 3.0 capability.
-
I had a virus warning and download abort by Avast for the 64 bit version. Now I cannot even reach the download file from the Yame Download Page
-
I have a second instance of YAME stopped working.
When double clicked the main window shows for a split second > disappears > program is active in the background but does nothing and can not be approached.
Only solution is uninstall > install.
There was nothing special about when or what caused it to behave like that after working without a problem for a few days.
I have seen similar behaviors when an antivirus is triggered, but my Kaspersky gave no notice and doesn’t have any log about it. -
I have a second instance of YAME stopped working.
When double clicked the main window shows for a split second > disappears > program is active in the background but does nothing and can not be approached.
Only solution is uninstall > install.
There was nothing special about when or what caused it to behave like that after working without a problem for a few days.
I have seen similar behaviors when an antivirus is triggered, but my Kaspersky gave no notice and doesn’t have any log about it.Check yame64.xml in cfg folder that windows pos is valid. Sometimes it goes to -32000 and so it is not visible
-
I had a virus warning and download abort by Avast for the 64 bit version. Now I cannot even reach the download file from the Yame Download Page
False positive I guess (just like virus scanners leave the user with a false sense of security IMHO, so at least there’s symmetry :D)
Can you whitelist the file in your AV software? If you download with chromium / chrome the file will be v-checked automatically, and even if it thinks the zip / exe contains a virus you can restore the download using a browser function.
All the best, Uwe
-
I’m noticing a stutter in my MFD displays every few seconds. I’m running the MFD’s on a second client machine (using hook method), and using two USB 2.0 to VGA adapter dongles to drive the MFD screens. Are these likely the cause of the stutter and would an upgrade to USB 3.0 dongles solve this (or switching to additional video cards)? My client PC motherboard is not USB 3.0 compatible, but I assume there are PCI-E cards out there that could provide the USB 3.0 capability.
I’m afraid I can’t give you a useful answer. I have never used USB monitors so I can’t tell if that’s the cause or not.
-
Stupid question, but can YAME be made to start stuff like TARGET where the program itself has to be started, a profile loaded, then “ran” to combine the stick and throttle into one virtual controller? Or stuff like FRAPS that has the UAC pop-up?
If you mean you want to start target from within Yame, that’s indeed possible.
If you mean you want to start Target and have it automatically load a profile and have it run, I don’t know because I don’t use Target. Maybe is the exe supports commands, like BMS does by having a link to “bms.exe -window -ef”, then it should be possible.
I don’t understand what you mean with FRAPS UAC pop-up. I just start Fraps from the run tab and then minimize it. -
Check yame64.xml in cfg folder that windows pos is valid. Sometimes it goes to -32000 and so it is not visible
Just checked the yame64.xml I kept before I uninstalled and that is exactly what it shows.
Thank you.