YAME64 suite
-
Thank you very much for the 32b
A stupid questionā¦.How to Stop/Close 32b version?
seems to be an issue with the 32bit version. Placed in our tracker as critical bug.
-
My client screen freezes whenever I use edit gauges or windows being dragged over top of each other. The ghost window sticks to the main window and prevents further use. I have to shut down program via task manager. And it is using 40% cpu while the window sits there. The client just keeps freezing on me whenever I move stuff to other monitors. Its a real mess on my client computer.
Also, is it possible to have all the gauges show before BMS starts. I donāt want to wait until I am in the seat to see there is a problem with placing and such.
Client computer: [email protected] Ghz 8gb ram GTX 580 3gb
Hi, is this by any chance happening with the 32Bit version? Seems the x86 version has some issues with the build the x64 doesnāt have.
-
Hi, is this by any chance happening with the 32Bit version? Seems the x86 version has some issues with the build the x64 doesnāt have.
No. 64bit version. I think it has to be something to do with my Windows install, because it works fine on my main computer, but I need it to work on my secondary computer.
-
Can the HUD on client be mirrored or flipped? Just like FMFDE.
-
Can the HUD on client be mirrored or flipped? Just like FMFDE.
Not yet, but I can imagine it can be useful if you want to use it as a flat extraction to be reflected onto a real hud. Then again. I assume the screen used in the hudbox would only be used for the hud extraction and nothing else, so itās easier to just set your screen to turn 180Ā° in windows, or physically turn that screen around then have it as an extra feature in code
-
Stupid question, but can YAME be made to start stuff like TARGET where the program itself has to be started, a profile loaded, then āranā to combine the stick and throttle into one virtual controller? Or stuff like FRAPS that has the UAC pop-up?
-
Iām noticing a stutter in my MFD displays every few seconds. Iām running the MFDās on a second client machine (using hook method), and using two USB 2.0 to VGA adapter dongles to drive the MFD screens. Are these likely the cause of the stutter and would an upgrade to USB 3.0 dongles solve this (or switching to additional video cards)? My client PC motherboard is not USB 3.0 compatible, but I assume there are PCI-E cards out there that could provide the USB 3.0 capability.
-
I had a virus warning and download abort by Avast for the 64 bit version. Now I cannot even reach the download file from the Yame Download Page
-
I have a second instance of YAME stopped working.
When double clicked the main window shows for a split second > disappears > program is active in the background but does nothing and can not be approached.
Only solution is uninstall > install.
There was nothing special about when or what caused it to behave like that after working without a problem for a few days.
I have seen similar behaviors when an antivirus is triggered, but my Kaspersky gave no notice and doesnāt have any log about it. -
I have a second instance of YAME stopped working.
When double clicked the main window shows for a split second > disappears > program is active in the background but does nothing and can not be approached.
Only solution is uninstall > install.
There was nothing special about when or what caused it to behave like that after working without a problem for a few days.
I have seen similar behaviors when an antivirus is triggered, but my Kaspersky gave no notice and doesnāt have any log about it.Check yame64.xml in cfg folder that windows pos is valid. Sometimes it goes to -32000 and so it is not visible
-
I had a virus warning and download abort by Avast for the 64 bit version. Now I cannot even reach the download file from the Yame Download Page
False positive I guess (just like virus scanners leave the user with a false sense of security IMHO, so at least thereās symmetry :D)
Can you whitelist the file in your AV software? If you download with chromium / chrome the file will be v-checked automatically, and even if it thinks the zip / exe contains a virus you can restore the download using a browser function.
All the best, Uwe
-
Iām noticing a stutter in my MFD displays every few seconds. Iām running the MFDās on a second client machine (using hook method), and using two USB 2.0 to VGA adapter dongles to drive the MFD screens. Are these likely the cause of the stutter and would an upgrade to USB 3.0 dongles solve this (or switching to additional video cards)? My client PC motherboard is not USB 3.0 compatible, but I assume there are PCI-E cards out there that could provide the USB 3.0 capability.
Iām afraid I canāt give you a useful answer. I have never used USB monitors so I canāt tell if thatās the cause or not.
-
Stupid question, but can YAME be made to start stuff like TARGET where the program itself has to be started, a profile loaded, then āranā to combine the stick and throttle into one virtual controller? Or stuff like FRAPS that has the UAC pop-up?
If you mean you want to start target from within Yame, thatās indeed possible.
If you mean you want to start Target and have it automatically load a profile and have it run, I donāt know because I donāt use Target. Maybe is the exe supports commands, like BMS does by having a link to ābms.exe -window -efā, then it should be possible.
I donāt understand what you mean with FRAPS UAC pop-up. I just start Fraps from the run tab and then minimize it. -
Check yame64.xml in cfg folder that windows pos is valid. Sometimes it goes to -32000 and so it is not visible
Just checked the yame64.xml I kept before I uninstalled and that is exactly what it shows.
Thank you.
-
Iām noticing a stutter in my MFD displays every few seconds. Iām running the MFDās on a second client machine (using hook method), and using two USB 2.0 to VGA adapter dongles to drive the MFD screens. Are these likely the cause of the stutter and would an upgrade to USB 3.0 dongles solve this (or switching to additional video cards)? My client PC motherboard is not USB 3.0 compatible, but I assume there are PCI-E cards out there that could provide the USB 3.0 capability.
Do you also notice the stutters when running anything else on those mfd screens? Like when playing a movie or something?
Also, as far as I remember those USB vga adapters tend to use cpu resources, maybe this is worth checking as well. Cpu throttling might cause some stutters too.
If you have plenty of bandwidth left on those USB 2.0 ports, switching to USB 3.0 wonāt make a big difference with USB 2.0 adapters. -
False positive I guess (just like virus scanners leave the user with a false sense of security IMHO, so at least thereās symmetry :D)
Can you whitelist the file in your AV software? If you download with chromium / chrome the file will be v-checked automatically, and even if it thinks the zip / exe contains a virus you can restore the download using a browser function.
All the best, Uwe
Thanks Uwe, used Chrome to download and switched off Avast as a precaution!
-
Do you also notice the stutters when running anything else on those mfd screens? Like when playing a movie or something?
Also, as far as I remember those USB vga adapters tend to use cpu resources, maybe this is worth checking as well. Cpu throttling might cause some stutters too.
If you have plenty of bandwidth left on those USB 2.0 ports, switching to USB 3.0 wonāt make a big difference with USB 2.0 adapters.I just installed a second video card and decided against the USB 3.0 dongle resolution, and indeed resolved the MFD stutter. So at least for me, multiple video cards are a better solution than USB video dongles for this software.
-
If you mean you want to start target from within Yame, thatās indeed possible.
If you mean you want to start Target and have it automatically load a profile and have it run, I donāt know because I donāt use Target. Maybe is the exe supports commands, like BMS does by having a link to ābms.exe -window -efā, then it should be possible.
I donāt understand what you mean with FRAPS UAC pop-up. I just start Fraps from the run tab and then minimize it.Yes, I want it to start TARGET, Iāve already figured out how to keep my profile loaded at TARGET startup, but I still have to press the green āplayā button to run my TARGET script. Iāve looked at the manuals and thereās nothing about command-line parameters for TARGET. As for FRAPS, it does a UAC pop-up for me each time I start itā¦
Another option then: is there a way to start the YAME suite and have it start the client automatically? And maybe even minimize the YAME suite window automatically?
-
A request regarding the current HSI:
The HSI has the right cardinal white line obscured by the flagās arm making it very difficult to put the RMI needle at 90Ā° when performing an IFR right arc during an approach. -
A request regarding the current HSI:
The HSI has the right cardinal white line obscured by the flagās arm making it very difficult to put the RMI needle at 90Ā° when performing an IFR right arc during an approach.Can you explain with the words used in Red Dogs chart tutorial and BMS manual? I donāt understand āright cardinal white lineā and āRMIā. Do you mean the course deviation indicator and station bearing pointer?