Falcon MFD Software for android tablets
-
Hi,
When I try to run the installer for the server I get a positive virus warning.
Is this file infected or should I turn of the virus scanner?Regards,
Vulture. -
Hi,
When I try to run the installer for the server I get a positive virus warning.
Is this file infected or should I turn of the virus scanner?Regards,
Vulture.i dont have any virus error
-
Hi,
When I try to run the installer for the server I get a positive virus warning.
Is this file infected or should I turn of the virus scanner?Regards,
Vulture.I initially got the same warning. If I recall, there were other options for downloading. I selected one of the other ones and it downloaded ok…no warning.
-
Hi,
Problem after U3 update … it seems that shared tex. mem has moved in BMS, nothing, DED , MFD’s are not displaying correct, RWR moved over to Rmfd… , else works fine, as expected.
With U2 everything worked ok. (so it must be something after upgrade to BMS-U3)
Cheers, & Happy New year.
-
Hi,
Problem after U3 update … it seems that shared tex. mem has moved in BMS, nothing, DED , MFD’s are not displaying correct, RWR moved over to Rmfd… , else works fine, as expected.
With U2 everything worked ok. (so it must be something after upgrade to BMS-U3)
Cheers, & Happy New year.
i checked on my pc
everything is seem finecan you uninstall Server and Reinstall again
also can you send me screen shoots from pm
-
Heh, disregard please. It is ok after I did as you instructed , fresh re-install . Probably some leftover files from server 3.4.0.2 ver . (didn’t uninstall previous, just install over… well that was wrong)
Thanks
-
hi,
I just adquired a Lenovo Tablet (Yoga Tab 3 plus) and I followed all the instructions from the file: “Installation(En) Update 1(2).pdf”. But Unfortunaletly I am not abe to run the tablet with the Falcon MFD. What the log is showing is the following:
Msg 2017.01.06 19:14:53 Falcon MFD –> Welcome
Msg 2017.01.06 19:14:53 onCreate --> WhichScreen : w1280
Msg 2017.01.06 19:14:53 onCreate --> Screen Width : 2560
Msg 2017.01.06 19:14:53 onCreate --> Screen Height : 1504
Msg 2017.01.06 19:14:53 onCreate --> Screen Density : 2.0
Msg 2017.01.06 19:14:53 Falcon MFD --> Log File Path : /storage/emulated/0/FalconMFD.log
Msg 2017.01.06 19:14:53 fnkReadXML --> connection_params Readed
Msg 2017.01.06 19:14:53 fnkReadXML --> ServerIP : 192.168.1.41
Msg 2017.01.06 19:14:53 fnkReadXML --> AndroidIP : 192.168.1.50
Msg 2017.01.06 19:14:53 fnkReadXML --> ServerPort : 21111
Msg 2017.01.06 19:14:53 fnkReadXML --> MsgPort : 21111
Msg 2017.01.06 19:14:53 fnkReadXML --> LMFDPort : 21112
Msg 2017.01.06 19:14:53 fnkReadXML --> RMFDPort : 21113
Msg 2017.01.06 19:14:53 fnkReadXML --> DEDPort : 21114
Msg 2017.01.06 19:14:53 fnkReadXML --> MisSchPort : 21115
Msg 2017.01.06 19:14:53 fnkReadXML --> RWRPort : 21116
Msg 2017.01.06 19:14:53 fnkReadXML --> RefreshRate : 100
Msg 2017.01.06 19:14:53 SocketListenerMsgPort --> Listen Started on Port : 21111
Msg 2017.01.06 19:14:56 SocketListenerLMFDPort --> Listen Started on Port : 21112
Msg 2017.01.06 19:14:56 SocketListenerRMFDPort --> Listen Started on Port : 21113
Msg 2017.01.06 19:14:56 SocketListenerRWRPort --> Listen Started on Port : 21116
Msg 2017.01.06 19:14:56 SocketListenerDEDPort --> Listen Started on Port : 21114
Msg 2017.01.06 19:14:56 SocketListenerMisSchPort --> Listen Started on Port : 21115
Log 2017.01.06 19:14:56 fnkMFD_ICIDEDModal --> MFD Started
Err 2017.01.06 19:15:24 threadHandlerHataKayit --> java.net.ConnectException: failed to connect to /192.168.1.41 (port 21111): connect failed: ETIMEDOUT (Connection timed out).I checked the ports and the IPs and it seems everything is correct. The versions I am using are:
For the tablet: FalconMFD (Ver 1.6.4).apk
For the PC: FalconMFDServer (3.5.0.0).exeAnd I am using Windows10
Can you help me on this? where is the errorr I am making?
Thanks in advance
-
I am progressing…… After I shut down the PC and reload again the situation improved. I run first the Falcon MFD server but when I run Falcon MFD at the tablet an error appears at the PC screen: “Unable to Connect to IP Adress”, Now the log is not showing errors but I still do not see any data on the tablet screen whe I am running BMS
-
Did you change the IP address on your tablet to match the Server IP address?
-
Thanks Dracfalcon,
Yes I have both at the PC and the tablet the same IP address at the “IP server”
-
while in the tablet the Client IP is in yellow and I can not change it, the server IP is white and I can modify. If I remember well the instructions says that when you have the right IP server it turns to yellow, but is not my case
-
Post a screenshot of the error. It will help all of us to assist you.
-
This is the error I get
-
please post all screen and send me log file
-
Thanks Komuru. I just sent you a mail with all the the requested info. I was not able to post the screen here, so I sent it as well in the mail.
-
Hello,
I also have a problem: when pressing certain keys on the tablet I get a ‘key does not match’, e.g.
192.168.2.101 -> (SimCBEOSB_10R) Key Does Not Match
192.168.2.101 -> (SimHmsSymWheelUp) Key Does Not Match- this happens for the OSBs, the JHMCS knob and the CMS Prgm and Mode knobs, also the ICP. All these are present in the keyfile
- when clicking the buttons on the “MFD” on the server program (picture below the error messages) the OSBs call the correct keys in the keyfile, so there must be something between server and tablet
- the MFD are correctly displayed on the tablet, it doesn’t seem to be a connection issue.
- In contrast, autopilot switches DO work:
192.168.2.101 -> ( SimLeftAPDown ) Ctrl + Alt E
192.168.2.101 -> ( SimLeftAPMid ) Ctrl + Alt W
(while typing these I notice that they have spaces between brackets and ‘SimLeft…’ while the ones with ‘key does not match’ do not - could that be a problem?) - I have already done clean re-installs both of the server and the apk, no joy.
Any pointers? Thanks!
-
Hello,
I also have a problem: when pressing certain keys on the tablet I get a ‘key does not match’, e.g.
192.168.2.101 -> (SimCBEOSB_10R) Key Does Not Match
192.168.2.101 -> (SimHmsSymWheelUp) Key Does Not Match- this happens for the OSBs, the JHMCS knob and the CMS Prgm and Mode knobs, also the ICP. All these are present in the keyfile
- when clicking the buttons on the “MFD” on the server program (picture below the error messages) the OSBs call the correct keys in the keyfile, so there must be something between server and tablet
- the MFD are correctly displayed on the tablet, it doesn’t seem to be a connection issue.
- In contrast, autopilot switches DO work:
192.168.2.101 -> ( SimLeftAPDown ) Ctrl + Alt E
192.168.2.101 -> ( SimLeftAPMid ) Ctrl + Alt W
(while typing these I notice that they have spaces between brackets and ‘SimLeft…’ while the ones with ‘key does not match’ do not - could that be a problem?) - I have already done clean re-installs both of the server and the apk, no joy.
Any pointers? Thanks!
PM me your email address. I will send you a keyfile that works for me. Use it to see if you still get the same issues.
-
The keyfile actually DOES the trick! Thank you very much!!
-
The keyfile actually DOES the trick! Thank you very much!!
You are welcome. Now you just have to reassign your HOTAS to my keyfile, or copy the needed info from my keyfile to yours.
-
Yes, that looks like it - interestingly, those spaces I noticed seem to do with it:
with your keyfile the server’s ‘incomming (sic) Msg. List’ says
192.168.2.101 -> ( SimCBEOSB_19L ) Ctrl + Alt Num9 (ie with spaces)with the other keyfile (BMSfull and Warthog; Morphine modified for U2)
192.168.2.101 -> (SimCBEOSB_19L) Key Does Not Match (ie without spaces)Not quite sure what the reason is but it may lead to the failure…