WIP: F-14 B/D
-
Impressive piece of artwork!!
-
Welcome back stingray.
Keep “on track” baby :p.
Nikos. -
That’s gotta be one of my favorite shots of this model ever!
Agreed.
Some beautiful work you are doing. You deserve a solid nob job.
-
I bet back in the days when Tomcat was in the works, Grumman would love to have you on board the design board…
Piece of work… man!!! Thanks for all your hard work!! -
Stunning work and commitment to detail!
-
Thanks guys for all the comments - much appreciated! I swapped out the display on my Thinkpad for a full HD AUO panel. Since I usually work on this while on the train or plane the resolution helps a lot with workspace in 3D programs.
Here’s a taste of one of the few T430s on the planet with this screen
Currently working on the nose gear and fitting it into the fuselage, also started on the cockpit. Slowly getting there…update later today.
-
As usual it took a little while longer but less than 3-4 weeks
Nose gear in final proportion (details and mesh optimization still pending):
Landing light and signal box corrected, wheels put in correct size and distance with the help of a twisted pic:
Even with the correction which resulted in a slightly widened fuselage opening and increasing total length it still fits an imperfect blueprint quite well:
Overall less adaptation needed in contrast to the main landing gear:
Total tris for landing gear is at 17k tris, reduction to less than 13k without losing too much detail is unlikely:
Here you can see the difference to my original shape:
Finally corrected the height of the nose gear compartment:
Still need to shorten the main compartment and the main strut a bit to align with the print. You can guess what’s next by looking at the blueprint :).
-
Some more progress on the pit. Once I got the Rio panel shape figured out I’ll separate the canopy from the fuselage and integrate it. As you can see from the shape it’s already adapted to the fuselage body and will not collide with the nose gear compartment. Connecting it to the canopy side rails and windshield frame will be the tricky stuff. How much detail will be added? Not much more, the sticks and some ejection seat additions plus some cables and details that you will see from the outside through the canopy and that’s it. Planning to keep it below 1000 tris.
Standalone:
Slowly filled with life
-
You 3D modellers make it look so easy!
-
-
Pit fits pretty well as expected. Now got a separate and moving canopy. Still have to model the canopy hinges. Ejection seat position and proportion is fine, consoles and stuff need adjustment.
Now on to fitting it to the AC, especially in the area of canopy rails and windshield frame it will be shall we say ‘interesting’ :).
-
-
And don’t forget the refueling probe !!!
Outstanding work mate, as usual
-
And don’t forget the refueling probe !!!
Outstanding work mate, as usual
Seriously, if you didn’t keep reminding me I’d actually forget about it:)
Sent from my STV100-4 using Tapatalk
-
Love me some hooks! And mirrors, well actualy just alck angulated planes but who cares.
Hooks also align and sink nicely into the fuselage rail for the canopy. Not sure yet how exactly the shape flows from the edge down to the panels and floor. If all fails I’ll throw in the A/C tubes and do a 2 way rounded inside wall.
Less than 400 tris for a great deal of immersion when sitting on the deck with canopy opened.
-
Needless to say, you’ve got us all hooked!
……Give me this one, I’m sick…
Good work as always Stingray. Always a good day when this thread is top of the page!
-
The ears of the pit - or something like that. Martin Baker SJU-17 NACES ejection seat. Couldn’t resist at least simplistically modelling that seat. I admit the seat belts are overkill but hey.
The super blocky original ones didn’t fit anyway because I had to lift the entire pit up and back. Even with detailed pictures estimating the proportions within the pit is guesswork at best. Absolutely not envying the pit builders!
NACES, Baby.
-
I follow your work with pleasure. I look forward to the day I fly this plane.
-
YES…! The seatbelts. I was all like… meh, UNTIL the seatbelts. NOW, you’ve got me…!!
-