Balkans 4.33 Update 3.6
-
Huuuh… I would go for fresh install, rather then torturing yourself what went wrong , . You have at least mixed up night textures with normal , but from some different plane or F16 version.
Probably you can ‘refresh’ only textures and database files (hdr file) … but don’t take this for real cure. If using JanHas models, you should update and Sim directory, his .dat models are different, but watch ur neck:rofl:
-
Yeah figured that. I thought I had seen the problem somewhere in the forum before, did a search and could not find it, so……
Will try a reinstall this weekend [emoji1303] -
@Chiang:
Hi, everybody
The Balkans is a very beautiful theather, but the enemy’s fighter planes are very outdated: Mig29A, Mig21, etc
Is that possible to include more modern planes like Su-27, Mig-31, Mig-29M, Mig-35, Su-34, Su-35, etc?
Thank you!Yes it is possible. If someone wants to set up a more modern campaign by all means go ahead but I cant work on it right now. My list is kind of full.
-
Yeah figured that. I thought I had seen the problem somewhere in the forum before, did a search and could not find it, so……
Will try a reinstall this weekend [emoji1303]But only Balkans… sorry I forgot, not whole BMS !!! …
-
But only Balkans… sorry I forgot, not whole BMS !!! …
I figured that also[emoji3], but thanks anyway [emoji1303]
-
last weekend I updated from Balkans 3.5 to 3.6. I used the upgrade with JanHas models.
This afternoon i flew the first night mission in a new campaign and I noticed some panels graphics got messed up when turning up the primary instrument pnl lights. Floodlights work fine.
I did not have this problem in 3.5.
Does anybody else experience this? Or should i just perform a fresh install?
I’m using the RNLAF Mlu F-16Thanks!
Did a fresh re-install of Balkans 3.6 full and the same problem occurs again. I decided to disable the pilot legs mod and re-entered the original number in the cockpitart file. And what do you know, problem fixed. I also tried the full pilot body but with the same results as the legs only.
Do you know why this happens Cougar? Could it be because of the JanHas models?
Maybe somebody can figure this out….
-
No it happens because of the cockpit model with the pilot. I need to go back through the pilot leg cockpits. Probably will work on them sometime this week. Kind of on my low priority list.
-
No it happens because of the cockpit model with the pilot. I need to go back through the pilot leg cockpits. Probably will work on them sometime this week. Kind of on my low priority list.
OK, I understand [emoji1303]. I was already looking for the files involved.
-
Hi, I recently installed Balkans 3.6, but when I go to the choose theather screen and select the Balkans theater Falcon freezes and when I try to restart Falcon It doesn’t start, so I have to uninstall it and then Falcon works again…
Any idea what’s happening?
Regards.
-
Hi Greyfox, i have a good idea for this issue, look this:
Spartan and Luispa also had problems when executing Balcans updating the theater they had, so the solution was to unistall (with the installer that leads the theater itself) and install the complete theater 3.6 in clean installation.
Greetings Compi.
Sniper-111sqn
-
Hi Greyfox, i have a good idea for this issue, look this:
Spartan and Luispa also had problems when executing Balcans updating the theater they had, so the solution was to unistall (with the installer that leads the theater itself) and install the complete theater 3.6 in clean installation.
Greetings Compi.
Sniper-111sqn
Hi mate!!
I already did it, no luck with that.
Looks like it could be an issue with AMD drivers: https://www.benchmarksims.org/forum/showthread.php?31575-Installation-Balkans-4-33-3-5-defective
I’m cheking it now so I can fly tonight
Thanks!
-
:drink::drink::drink::drink::drink:
-
Hi, finally it was an issue with the drivers, I uninstalled them with the AMD application and then I installed the older version.
Now everything works ok.
Regards
-
If you do not want to use the JanHas models,
Install the main 1.7 GB installer, then install the Balkans 3.6 alternate.
If you want to use the JanHas models, just install the full installer.
I installed Balkans 4.33.3.6 for BMS 4.33 Update 3 (1.73 GB). Then I downloaded Update 3.6. alternate and copy / paste into a folder with the Balkan Theater … still have JanHas models. Do I make a mistake somewhere?
-
So just to be clear, does the janhas models cause FPS issues on strong enough systems? My balkans installation is 3.6 plus the hi res textures. I’m getting bad FPS like 20-15 on the ground and 30 in air, my specs are Ryzen 1600 @ 3.95Ghz, 16GB 3066Mhz DDR4, XFX r9 290X 4GB, Windows 10 64bit. The issue is my system isnt being used to its full potential but thats understandable with dx9. My graphics settings in falcon balkans are the same as korea and in korea i get my locked 60FPS on ground and air with hi res texture tiles (no janhas models). If the janhas models are causing the issue, why?
-
So just to be clear, does the janhas models cause FPS issues on strong enough systems? My balkans installation is 3.6 plus the hi res textures. I’m getting bad FPS like 20-15 on the ground and 30 in air, my specs are Ryzen 1600 @ 3.95Ghz, 16GB 3066Mhz DDR4, XFX r9 290X 4GB, Windows 10 64bit. The issue is my system isnt being used to its full potential but thats understandable with dx9. My graphics settings in falcon balkans are the same as korea and in korea i get my locked 60FPS on ground and air with hi res texture tiles (no janhas models). If the janhas models are causing the issue, why?
I’m guessing it’s a combination of Janhas and just in general more 3D objects (in higher res) then KTO.
I have the same issue. See my signature below for my specs.
I manually installed Janhas F16 models and weapons and other stuff and on KTO I still get around d 60FPS on Kunsan and 75+ in the air on a normal day with a 4 ship in the bubble.
In Balkans I get 15-20 on Aviano and 30-40 in the air with the same 4 ship and weather.