YAME64 suite
-
I haven’t been using Yame64 with my 4.34 install because when I start Yame as a client with Masked Background it causes lag in the Windows UI, but if I don’t use a masked background there Windows UI behaves normally. This occurs even before I try starting BMS. Possibly its a VCRUNTIME issue but I am just wondering how do I go about troubleshooting this issue?
-
I haven’t been using Yame64 with my 4.34 install because when I start Yame as a client with Masked Background it causes lag in the Windows UI, but if I don’t use a masked background there Windows UI behaves normally. This occurs even before I try starting BMS. Possibly its a VCRUNTIME issue but I am just wondering how do I go about troubleshooting this issue?
The masking of window is removed from the next update as there is an issue with windows as you said. Please just don’t use it.
-
Well that’s good to know. Thanks for all your work.
-
hi guys is this right? i can’t find an OSB 29 on cpd 60 …if that’s the case which OSB button toggles between R/L MFD?
thx in advance!
Sub -
hi guys is this right? i can’t find an OSB 29 on cpd 60 …if that’s the case which OSB button toggles between R/L MFD?
thx in advance!
Subcan’t see attachment, but OSB 15 is the SWAP button, switching the LMFD for RMFD / vice versa
-
Install Falcon 4.0, install Falcon BMS 4.34, install yame64. Start yame64 - blanc global page and no server page. Set BMS path in yame64.xml - no result. What else can i do?
-
Until the new version comes out you have to work around it: https://www.yame64.com/how-to/
-
I have 2 monitors i’m using for yame. 1 is the main instrument panel and the second monitor is for the center instrument. This center panel is displayed on 12" touch screen monitor 1280 x 800 resolution I have the monitor turned to portrait orientation so the resolution i’m giving yame is 800 x 1200. when i go to move my instruments when setting up my yame panel the display flickers between desktop and yame while my mouse is on the small monitor. If I move the mouse off of the monitor and click on the main instrument panel monitor the yame window is displayed just fine. During game play the 3rd monitor (touchscreen) is only showing the desktop, it doesn’t flicker at all, any ideas?
-
This post is deleted! -
I can not get YAME 64 v1.2 to work on my Win 10 PC. Previously I had it working with BMS 4.34 but my windows crashed (for other reasons) so I reinstalled Win 10 on a reformatted drive. I then loaded BMS 4.33 U1-U5, BMS 4.34, and YAME64 v1.2. I also installed MS Visual C++ as shown bellow:
When I launch YAME, this is how it starts:
The Global tab is blank and looks like this:
When I start the Client I get this error message:
However, both Falcon BMS.cfg files in 4.33 U1 and 4.34 are set to 1 as shown below:
I also made sure the Registry was changed to C:\Falcon BMS 4.34 as shown below:
Additionally, the YAME64.xml path is set to the correct location as shown below:
The YAME log file looks like this:
At this point, I am not sure what to do. I tried to uninstall all versions of BMS and YAME64 v1.2, and then reinstalling them with no change in failure.
Again, I previously had YAME64 v1.2 running great with BMS 4.34 before my Win 10 crashed hard, forcing me to reinstall Win 10 on a reformatted drive. So I know my PC is totally compatible. I am thinking it is some setting or .cfg that is not correct, but I am unable to locate it. I followed the How-to from the YAME web site with regards to the v1.2 workaround and BMS 4.34.
I’m not sure what to do next. Any help would be much appreciated. Thank you.
-
ok i have an issue that never had before…
Start YAME ,extractions on the 2 screens are ok, but when i run 4.34 the extractions are alive, but the main screen (4.34 screen) goes black…
any ideas?
(Win7x64-ATI R7 370) -
I also made sure the Registry was changed to C:\Falcon BMS 4.34 as shown below:
Can you try reverting registry to point to 4.33 and run BMS manually instead of via the yame launch button? Uninstall and make sure all yame files are deleted first, then revert registry, then reinstall yame.
-
I can not get YAME 64 v1.2 to work on my Win 10 PC. Previously I had it working with BMS 4.34 but my windows crashed (for other reasons) so I reinstalled Win 10 on a reformatted drive. I then loaded BMS 4.33 U1-U5, BMS 4.34, and YAME64 v1.2. I also installed MS Visual C++ as shown bellow:
[…]
When I start the Client I get this error message:Same problem here - and g_bExportRTTTextures ist set to 1 in both cfgs.
Good news: I drilled this error down, but nevertheless the MFDs, etc. are no showing up.
For some reason YAME is (now?) looking for a falcon bms.cfg in C:\User\Config
Jusrt create these (sub)directories and copy the falcon bms.cfg in there and at least the error above is gone.So… Now I (we) need only help to get the MFDs & Co. to be extracted again…
-
really no one?
:noidea: -
Yame has a registry entry for where BMS is installed. So the config for 4.33 and 4.34 need to be the same regarding the RTTEXport settings. Also you’ll have to remove the DLL hook file that Yame wants to use which worked with 4.33 but not with 4.34.
-
I tired to get yame64 to run with the work around, but that seems to break everything I followed these instructions:
https://www.yame64.com/how-to/My g_bExportRTTTextures was already set to 1 for both release and everything was running fine. I then changed the registry entry voor 4.33 to point at the 4.34 folder as suggested and then I got
I changed the registry to it’s original value and still got the error. BMW won’t run anymore. Any idea what’s going wrong?Edit: 4.33.5 is still running fine
-
I tired to get yame64 to run with the work around, but that seems to break everything I followed these instructions:
https://www.yame64.com/how-to/My g_bExportRTTTextures was already set to 1 for both release and everything was running fine. I then changed the registry entry voor 4.33 to point at the 4.34 folder as suggested and then I got
https://i.postimg.cc/8cz65GWs/2019-10-28-12-37-34-Falcon-BMS-exe-Entry-Point-Not-Found.png
I changed the registry to it’s original value and still got the error. BMW won’t run anymore. Any idea what’s going wrong?Edit: 4.33.5 is still running fine
The DirectX hook is not working for 4.34. So disable it and remove the d3d9.dll from <falconbms>\bin\x64 folder</falconbms>
-
The DirectX hook is not working for 4.34. So disable it and remove the d3d9.dll from <falconbms>\bin\x64 folder</falconbms>
Thanks for the swift reply. I ended up reinstalling .34 and everything worked again.
But I just checked, there’s no such dll in the .34 bin-folder. Or will starting yame add that in the folder?
-
Thanks for the swift reply. I ended up reinstalling .34 and everything worked again.
But I just checked, there’s no such dll in the .34 bin-folder. Or will starting yame add that in the folder?
Yes, the dll is copied there by yame, so if not present no worries.
-
What do i need to modify in CPD 60 map file, in order for a/c position to be displayed properly in other theaters?
For example in EMF theater i save the map via WDP (png), then i resize it to 2048x2048 px but the a/c position is not properly displayed in map.
Any advice?
Thx in advance