YAME64 suite
-
Yes that is correct. There is no 3Dhook dll in the Falcon BMS 4.34/Bin/x64 folder, and the set g_bExportRTTTexture is set to 1 in the 4.33 and 434 falcon_bms.cfg file.[/QUO
Please, s3nd me your config.xml file
I am unsure where I can find this related file. Can you direct me to where I can find the config.xml file you are referring to. When I did a global search on Drive C for config.xml, these are the files that were retrieved.
Thank you for your help.
-
I am unsure where I can find this related file. Can you direct me to where I can find the config.xml file you are referring to. When I did a global search on Drive C for config.xml, these are the files that were retrieved.
Thank you for your help.
The file ist neither named config nor is it’s type xml. The file name ist “falcon bms.cfg” and it located in your falcon 4.34 installation folder/User/Config.
It’s a simple textfile. -
I was referring to YAME configuration file, not Falcon.
My bad, the file is called YAME64.xml and should be located in conf folder of the yame installation path.
I can’t remember well as it is now all different… -
It seems like the the most recent extraction software still updated to the latest BMS version might be YAME64…if it is still being developed and updated…
I understand all the different personal circumstances that cause delays…yet I would sure hope for a sooner release.
With best regards, -
I was referring to YAME configuration file, not Falcon.
My bad, the file is called YAME64.xml and should be located in conf folder of the yame installation path.
I can’t remember well as it is now all different…Here is a pic of my YAME64.xml. I could not figure out how to attach the file to this message.
Again, thanks for the help.
-
Ok, seems all good. So please double check if the g_bExportRTTTexture is set to 1 in your falcon bms.cfg.
As a simple test, other gauges (like an altitude or ADI) do work? -
At least on my Setup in order to get Yame 64 with BMS 4.3.4 running I had to install 4.3.3 as well and set g_bExportRTTexture on both
-
Ok, seems all good. So please double check if the g_bExportRTTTexture is set to 1 in your falcon bms.cfg.
As a simple test, other gauges (like an altitude or ADI) do work?Yes, g_bExportRTTTexture are set to 1 in 4.34 and 4.33, and there are no 3DHook dll files in the x64 folder that I am seeing. See Pics below:
And yes, the simple test of the ADI and Altimeter gauges works. I was surprised that they did.
The only problem appears to be that the MFDs, DED, and RWR symbology are not displaying. I have blacked out extractions for those displays.
-
Yes, g_bExportRTTTexture are set to 1 in 4.34 and 4.33, and there are no 3DHook dll files in the x64 folder that I am seeing. See Pics below:
And yes, the simple test of the ADI and Altimeter gauges works. I was surprised that they did.
The only problem appears to be that the MFDs, DED, and RWR symbology are not displaying. I have blacked out extractions for those displays.
Anybody have any suggestions? Help is greatly appreciated to solve this issue.
-
I’m having the same issues on my end with YAME1.2 at the moment and haven’t found a solution yet (I’m extracting the gauges using YAME 1.2 and use RTT remote for the MFDs as a workaround, check your BMS “Tools” folder).
I’ve double checked the falcon bms.cfg settings, the 3dhook.dll (or its “non-presence”, rather :)), both 4.33 and 4.34 are installed, so mfd extraction should work in theory (and it does with RTT remote and in komurcu’s android app, just not with YAME).
I can post my yame64 cfg later if that’s any help.
All the best, Uwe
-
A long shot, but for at least 1 person I know of it worked: Can you hit the “remove hook files” button in the “globals” tab? Even though no visible 3d hook dll files present before, after clicking that button it suddenly did recognise the rttextracture setting.
-
A long shot, but for at least 1 person I know of it worked: Can you hit the “remove hook files” button in the “globals” tab? Even though no visible 3d hook dll files present before, after clicking that button it suddenly did recognise the rttextracture setting.
Just tried it, sadly the “remove hook files” is ghosted on my “global” tab. Checked the logs, didn’t see any obvious errors, I’ll paste the yame config shortly.
Cheers, Uwe
xml config:
-
Hello everyone!
I think since the update “KB4522741 .NET Framework 3.5 and 4.8 for Windows 10 Version 1903” for Windows 10 I cannot open Yame anymore. I’ve installed the update on 3.12.19. Before everything was good. No changes we’re made from my side.
The issue:
Clicking on Yame, no window opens. Application doesn’t start.
My tries to fix it:
1. Run as admin: no success
2. Install the Windows fix update: https://support.microsoft.com/en-us/help/4530743/kb4530743-update-for-net-framework–-no success
3. Bitdefender Anti-virus software is checked. No block from the software.Falcon Config File
g_bExportRTTTexture= 1YAME64.xml
<apps version=“1.2”><falcon><windowed>false</windowed>
<path>C:\Falcon BMS 4.33 U1</path></falcon>
<server refreshrate=“30” port=“53000”><texturehook>false</texturehook>
<keyserver>false</keyserver></server>
<client refreshrate=“30” runserver=“false”><texturehook>false</texturehook>
<server port=“53000”>local</server>
<smoothtextures>true</smoothtextures>
<mipmaptextures>true</mipmaptextures>
<layout>Ice1ScreenSetup_v121.xml</layout>
<usetouchscreen>true</usetouchscreen></client></apps>Any suggestions?
Thank you!
-
Hello everyone!
I think since the update “KB4522741 .NET Framework 3.5 and 4.8 for Windows 10 Version 1903” for Windows 10 I cannot open Yame anymore. I’ve installed the update on 3.12.19. Before everything was good. No changes we’re made from my side.
The issue:
Clicking on Yame, no window opens. Application doesn’t start.
My tries to fix it:
1. Run as admin: no success
2. Install the Windows fix update: https://support.microsoft.com/en-us/help/4530743/kb4530743-update-for-net-framework–-no success
3. Bitdefender Anti-virus software is checked. No block from the software.Falcon Config File
g_bExportRTTTexture= 1YAME64.xml
<apps version=“1.2”><falcon><windowed>false</windowed>
<path>C:\Falcon BMS 4.33 U1</path></falcon>
<server refreshrate=“30” port=“53000”><texturehook>false</texturehook>
<keyserver>false</keyserver></server>
<client refreshrate=“30” runserver=“false”><texturehook>false</texturehook>
<server port=“53000”>local</server>
<smoothtextures>true</smoothtextures>
<mipmaptextures>true</mipmaptextures>
<layout>Ice1ScreenSetup_v121.xml</layout>
<usetouchscreen>true</usetouchscreen></client></apps>Any suggestions?
Thank you!
Don t know what Is the problem, bit are you dire that game shoul rum on a monitor ti the letto of the main One?
Try to set ui pos x to zero -
The problem is, that I can’t start Yame for some reason. When I click on the .exe file, nothing happens.
-
Try to set in yame64.xml the ui pos x and y to 0.
-
Okay thank you. Will try it today.
-
I had no success with this change. Maybe I have to change something other?
Maybe it has to do with this windows issue? I installed the windows fix, but no success.
-
good evening
I have W10 1909
No worries with Yame.
I give you my .xml for a test if you want it.<apps version="1.2"><falcon><windowed>false</windowed> <path>C:\Falcon BMS 4.33 U1</path></falcon> <server refreshrate="30" port="53000"><texturehook>false</texturehook> <keyserver>true</keyserver></server> <client refreshrate="30" runserver="false"><texturehook>false</texturehook> <server port="53000" sync="false">192.168.0.38</server> <smoothtextures>true</smoothtextures> <mipmaptextures>true</mipmaptextures> <layout>FALCON 4_34 4K.xml</layout> <usetouchscreen>false</usetouchscreen></client></apps>
-
Dear Santa, all I want for Christmas is YAME v2.