Morphine's Profile
-
@Cpt:
Hi there.
Its been years since ive played falcon. I should have guessed I would run into problems now that ive forgotten everything. i wondered if you could give us a clue into what I might be doing wrong?ive put the key file in the config directory and have run the script. (not sure which tmc to run - but tried both)
i keep getting: Runtime Error: Symbol not found: TWCSThrottle in main ( line 11 in Warthog_BMS_Full_4_434_benco.tmc )
wondered if you could tell me what I might be doing wrong?
undoubtedly me. apprecaite you taking the time to update the file for us. very nice of you kind sir…
many thanks.
Hey Cpt Calm,
Are you using the last version of Target UI? -
Hi guys. I have a question. Based on Morphine´s/Gastone´s keyfile, there are the following lines for the coolie switch L/R
OTWSelectHUDMode -1 0 0x2 0 0 0 1 “VIEWINT: HUD Only”
FOVToggle -1 0 0x26 0 0 0 1 “VIEWGEN: Look Closer - Toggle”However I want them for the rudder. So, is it feasible to change the above to
AFRudderLeft -1 0 0x2 0 0 0 1 “FCTRL: Rudder Left”
AFRudderRight -1 0 0x26 0 0 0 1 “FCTRL: Rudder Right”Or do i have to change it to this
OTWSelectHUDMode -1 0 0x33 0 0 0 1 “VIEWINT: HUD Only”
FOVToggle -1 0 0x34 0 0 0 1 “VIEWGEN: Look Closer - Toggle”Thanks in advance
None of those are the lines you want to change.
You need to change FOVToggle 22 8 -2 0 0x0 0 to AFRudderRight 22 8 -2 0 0x0 0
and OTWSelectHUDMode 24 8 -2 0 0x0 0 to AFRudderLeft 24 8 -2 0 0x0 0 -
once again, thank you Gastone
-
Hey Cpt Calm,
Are you using the last version of Target UI?Hi there Benco. thanks for the reply.
It was indeed an update required. almost 2 hours later. yes 2 HOURS!!! man these firmwares!!! I wont bore you with the details!but -got my throttle back and joystick.
right. the profile.
I’m not sure which one to load. Warthog_BMS_Full_4_434_benco.tmc or Warthog_BMS_Full_5_434_benco.tmc.
Last one I tried was “…full_5…”
inside falcon -it finds the throttle. I can see the dogfight mode coming on, the radar cursor moving, the master arms switch, landing gear etc - so throttle is good. (except air brake. no air brake for some reason)
the joystick however moves around but has no functions set to its buttons.
getting closer… I can… I can feel it.
no doubt your going to tell me to load version “…full_4…” and click on something to get “…ful_5…” to load after it. or something like that?
it really has been a long time for me!
-
Hey Cpt Calm,
Have a look at #1 : https://www.benchmarksims.org/forum/showthread.php?32399-A-Guide-to-Morphine%E2%80%99s-Profile-for-BMS-4-33-and-Beyond
You will find a lot of answers
-
See… I knew it was me!
Thank you so much. works flawlessly now.
few steps in that guide I missed.
Thanks again.
-
Hello:
Am using Morphine’s Warthog profile
Will someone help me with the app. code (for both *.key & *.tmc files) assigning “tmc right” for wheel brake?
Appreciate your help -
I don’t use the TARGET program with the TM….is there just a basic profile? I am new to BMS
-
Is there a picture diagram of the Thrustmaster Hotas Warthog, showing what each button on the throttle and stick does in BMS, for Gastone’s updates to Morphine’s profile? That would be very helpful. Are they the same as the pics Morphine posted originally?
-
I don’t use the TARGET program with the TM….is there just a basic profile? I am new to BMS
I started just a few months ago and had some problems starting with the Warthog.
Lessons learned.
- Avoid TARGET
- Go to your BMS installation folder \Docs\01 Input Devices\03 HOTAS Setup and start from there. “BMS Device Setup Guide” then jump into the Warthog folder.
- Go and get the Alternative Launcher and do your own setup of buttons/axes in there.
- I have not used Morphine’s profile (yet). Start simple and work out what you want/need as you get experience flying.
-
Does Morphine’s profile work with bums 4.35?
-
I meant bums, lol
-
I’m keeping a version of it going over. I still have to add the keybinds for U1 still, but other than that it should be good to go.
-
Are you planning to update the morphine´s profile to 4.36. At the moment I’m using the version for 4.35 and so far no problem, but Warthog told me that with the new 4.36 many keys have changed, some have been deleted and others have been created.
-
The one posted with BMS isn’t good enough?
-
@MaxWaldorf Thanks for your input. I was no aware that in 4.36 there is a profile compatible with Target. By the way, I was not able to find it. I entered in “HOTAS” and I saw 4 files 3xTXT and 1 pdf and none *.tmc
Since 2016 I used Morphine and if is possible I prefer to keep it, I like it very much.
-
@fvelazdem to be honest, you don’t need target anymore (I haven’t installed it for ages)
I might share my profile when get access to my main PC in a couple days…
-
Thanks!!
-
Hi all.
recently blew the dust off the ol’ falcon kit.miss the campaigns if I am honest and wanted to see how things had changed.
Took me 20 minutes to remember the pain of setting up though! lol… been a while.
Question to Pegasus82 really.
followed your recommendations.
Only thing I am struggling with is the “china hat switch” … big red one on the throttle handle.
Works as intended -ie, radar antenna elevation.
What I wanted to do though, is have that also zoom in and out the TGP pod.I cant seem to find the ability using the key file as of yet unless i missed it?
Using the recommendation within the HOTAS warthog folder in the root of falcon.Wondered if you could help ? or anyone else for that matter…
-
Hi Gastone!!
Any plans to release an update for 4.36 of your profile?