Israel Theater Of Operations for BMS 4.35
-
108th VFS offical link has been added for you convinient (first post)
Enjoy! -
Good day. Question. The F-15I can carry SPICE gliding bombs, but target designation cannot be done due to the fact that on the DED panel there is no way to indicate the azimuth, target number and other launch parameters. If there is a solution to this problem, tell me where. Thanks.
-
taken from the dash-1
Aircraft in the DB that can use SPICE have a flag in the flight model data file called “CanUseSpice” (can also be found in the avionics configurator). If set to 1, it will allow the special avionics dedicated for the SPICE.
Sounds like the F-15I doesn’t have this setting by default
-
SPICes can be lit up on the F-15I, but it cannot be programmed on the DED screen, the problem is old, but maybe the theater designers know how to solve this. On the F-16I everything works flawlessly.
-
SPICes can be lit up on the F-15I, but it cannot be programmed on the DED screen, the problem is old, but maybe the theater designers know how to solve this. On the F-16I everything works flawlessly.
I wrote that down, Thanx for let us know
-
Thank you for a working 4.35 ITO !!!
1. Is there a change log doc?
2. Reading the documents…couldn’t find reference for radio frequencies of different agencies (ground, tower…)
3. Was the AWACS issue of 4.34 fixes? -
Thank you for a working 4.35 ITO !!!
1. Is there a change log doc?
2. Reading the documents…couldn’t find reference for radio frequencies of different agencies (ground, tower…)
3. Was the AWACS issue of 4.34 fixes?1. The relevant Change log is 4.35 changelog, maybe some models have been updated specifically to be compatible with 4.35
2. path - Falcon BMS 4.35\Data\Add-On Israel\Docs\Airport Data and IAP charts\Israel Navaids list v1.0.3.pdf
ITO didnt change from 4.33 therefore the frequencies of ground, approach, tower are the same for every base, but the list of them - exist in the path i have just mentioned
3. Im not sure what AWAC problem was existed in the past, bug report would be helpfull to find the problem source -
Unfortunately the AWACS and ELINT problems are still present:
Flying for Israel - for example in the Operation Peace for Galilee - no AWACS or ELINT flights are fragged.
If the player attempts to frag either, then error message pops up: Unable to do this “No path to target found -> Could not setup ingress WPs”.
The workaround is basically to frag any flight as “Training” and then add Awacs and Elint to the package along with escort, then manually delete the training flight after fragging. Its a little annoying but works.IIRC with 4.34 someone from the BMS dev team has mentioned that this has something to do with overflying hostile territory and is basically an issue not exclusive to Israel theater, but I may be wrong.
-
Hey guys, I see your tri files look like the pre-4.35 ones. I’m not sure this is intended and that they’re supposed to work like this. Just a heads-up. If you’re surprised, check KTO 4.35 tri files.
-
And one more point-F16I-52 Sufa can use GBU 39SDB for a long time,but in stock they are not present. You have to modify the hardpoint 3\7 on the plane yourself,but not everyone knows how and what to look for in the editor.Thank you for not abandoning this project.I have been playing this modification since version 0.99,it is one of the best theaters that there is and I often use other aircraft besides the F16I,and I would like the game to become better.
-
Unfortunately the AWACS and ELINT problems are still present:
Flying for Israel - for example in the Operation Peace for Galilee - no AWACS or ELINT flights are fragged.
If the player attempts to frag either, then error message pops up: Unable to do this “No path to target found -> Could not setup ingress WPs”.
The workaround is basically to frag any flight as “Training” and then add Awacs and Elint to the package along with escort, then manually delete the training flight after fragging. Its a little annoying but works.IIRC with 4.34 someone from the BMS dev team has mentioned that this has something to do with overflying hostile territory and is basically an issue not exclusive to Israel theater, but I may be wrong.
Yes, in some areas “path to target not found -> WPs input could not be configured”, you have to assign your own airspace to the area,the same situation with transport aircraft.
-
Unfortunately the AWACS and ELINT problems are still present:
Flying for Israel - for example in the Operation Peace for Galilee - no AWACS or ELINT flights are fragged.
If the player attempts to frag either, then error message pops up: Unable to do this “No path to target found -> Could not setup ingress WPs”.
The workaround is basically to frag any flight as “Training” and then add Awacs and Elint to the package along with escort, then manually delete the training flight after fragging. Its a little annoying but works.IIRC with 4.34 someone from the BMS dev team has mentioned that this has something to do with overflying hostile territory and is basically an issue not exclusive to Israel theater, but I may be wrong.
Hey guys, I see your tri files look like the pre-4.35 ones. I’m not sure this is intended and that they’re supposed to work like this. Just a heads-up. If you’re surprised, check KTO 4.35 tri files.
If the problem is with the triggers, then im not sure that i could handle it for now
But Ill try to check some solutions for that, Thank you for your reportAnd one more point-F16I-52 Sufa can use GBU 39SDB for a long time,but in stock they are not present. You have to modify the hardpoint 3\7 on the plane yourself,but not everyone knows how and what to look for in the editor.Thank you for not abandoning this project.I have been playing this modification since version 0.99,it is one of the best theaters that there is and I often use other aircraft besides the F16I,and I would like the game to become better.
Has been written down, thank you for letting me know
@ad02081986 about the F15I problem, probably Code related from KTO, I wrote it down in order to deal with it in the future
-
We’ll be back with the triggers later probably, being handled on Discord.
-
Hi Gents,
That`s true! No Awacs or Elint Missions where fragged over enemy Territory.
I solved the Problem, by using the Mission Commander.
The Campaigns against Egypt, or without the Influence of the small “PA-Party” - You may Simply change the Relations between Israeli and the Pa-Party,
from Neutral to Friendly in Mission Commander - Teams - Relations.
Result is the small,splitted Territory of the “brown PA-Party” is now overflyabe for Awacs,Elint Missions, and the Campaign-Engine create this Missions with Havcaps etc.By “Peace for Galilee” its more difficult, because the “PA-Party” and its Territory is included to the Syria Forces and enemy.
For Example, I Remove with Mission Commander the Israeli E-2C Squadron to the allied Nato Airbase Akroti.
Now yourself create the Awacs Missions, but also further outside from Land to the Mediterranean Sea.
In this case the Campaign-Engine does not do.Greetings to all!!
-
Very juicy… Thank you and happy new year
-
Not sure what’s going on but I see FKC-1D aircraft in the campaign on the Israeli side but it seems like when i view the camp in MC they are KFIR for that particular SQN. In the model viewer shows as KFIR too which is ok but in 3D world I see FCK-1D?
Serpent Sting 88 campaign.
Any ideas?
-
Now You can submit a bug report via BMS community Bug tracker
Bug Reporting:
we have joind the alliance with Blu3wolf, therefore we have become part of BMS community bug tracking
To submit a report - get into the link and select ITO as theater
https://bmsbugs.blu3wolf.com/bug_report_page.php?project_id=4Please: provide a valid Bug report as instruted here by Nick - https://www.benchmarksims.org/forum/showthread.php?35644-How-to-make-a-bug-report
first post updated
@ DUSTOFF17 - use this tool for better recognition of the problem
-
I have a problem creating a new package for an AWACS. I tried the same at the Korea campaign and I dont get the error I get on Israel:
“No path to target found -> Could not setup ingress WPs”Thanks for the help!
-
I have a problem creating a new package for an AWACS. I tried the same at the Korea campaign and I dont get the error I get on Israel:
“No path to target found -> Could not setup ingress WPs”Thanks for the help!
Have a look here, https://www.benchmarksims.org/forum/showthread.php?38666-BMS434U3-gt-Cannot-create-AIR-REFUEL-flights
-
Have a look here, https://www.benchmarksims.org/forum/showthread.php?38666-BMS434U3-gt-Cannot-create-AIR-REFUEL-flights
Thanks Cantoo. I tried adding the AWACS or ELINT package inside the flot and uncheking the set by HQ but I get the same error.
I don’t have problems adding F-15 or F-16 packages.Cheers,