JanHas Models & Skin Thread -Compatible with 4.36
-
Extremely extremely interesting detail…
Is this on 4.35 with DX11 engine using the latest LV5 models, or / have you experienced something similar in the past with 4.34 and DX9 engine?
-
Hi Janhas
Great models!! I have a question, on the ground there seems to be a major performance hit related to CPU when using your models, i tested with stock and then with your models. But the strange thing is that as soon as you take off when gears are off the runway it goes up by more than 50%. Doesn’t matter if you are 10ft or 1000ft off the ground i flew 10ft gears down over the airbase and runway at slow speed and the FPS was still high, but as soon as you touch down it drops immensely. I get 80FPS SIM with 10-12ns and and 80FPS GPU 3d. On the ground though with your models its 40FPS SIM and same for GPU. When removing your models i don’t have that issue on ground. It is a very strange and reproducible issue. I tested this with only 1 plane on an empty TE and also in campaign with multiple planes and its the exact same perf hit. And its only in cockpit view, external view on ground FPS is high again.
Discussed here
-
Shadows turned on cut my fps by 58%. It does this with JH models and skins and with default BMS skins. It just shows up more with JH stuff because JH skins and models are more taxing on cpu than default. Taxi area is worse due to line up of jets, but as soon as you take off it makes big fps improvement.
-
Shadows turned on cut my fps by 58%. It does this with JH models and skins and with default BMS skins. It just shows up more with JH stuff because JH skins and models are more taxing on cpu than default. Taxi area is worse due to line up of jets, but as soon as you take off it makes big fps improvement.
The strange thing is with shadows is that in stock I don’t get the immense fps drop(At least not noticeable FPS wise stays at 75-80), but with janhas models I do it drops to 40FPS and thats even on empty TE with 1 F16. I just don’t understand even flying the 10ft above ground FPS is fine but as soon as the wheels touch the ground it drops. I’ll test with shadows off tonight and report back.
-
The strange thing is with shadows is that in stock I don’t get the immense fps drop(At least not noticeable FPS wise stays at 75-80), but with janhas models I do it drops to 40FPS and thats even on empty TE with 1 F16. I just don’t understand even flying the 10ft above ground FPS is fine but as soon as the wheels touch the ground it drops. I’ll test with shadows off tonight and report back.
. I have tested many times and shadows drop my FPS by 58% on the ground with or without Jan Has. It is just more noticeable with high res models because it is a further hit and shows even lower FPS. YMMV
-
Is it a bug, why does it get normal when you takeoff even if you are 10ft above the ground?
-
It is not whether you are on the ground or not but whether you are below 10-20ft AGL. FPS drops drastically when you are at that altitude.
It happens with the default F-16 model too. -
Its a bug that needs to be investigated i presume this is not normal.
-
This post is deleted! -
Any plans of creating the Wraith aggressor 89-048
-
Τοp skin
-
Hi all, after my daytime job kept me away from the models from some time I have found some time to finish and release the next one; the F-16A Fighting Falcon!
The model has two skin sets but additional set have been added. Check the texture numbers to use when swapping sets.
You can download the package from my website; https://www.janhas.net
-
Hi all, after my daytime job kept me away from the models from some time I have found some time to finish and release the next one; the F-16A Fighting Falcon!
The model has two skin sets but additional set have been added. Check the texture numbers to use when swapping sets.
You can download the package from my website; https://www.janhas.nethttps://www.janhas.net/Files/Image/Large_images/F-16A_00.jpg
https://www.janhas.net/Files/Image/Large_images/F-16A_02.jpg
https://www.janhas.net/Files/Image/Large_images/F-16A_03.jpg
https://www.janhas.net/Files/Image/Large_images/F-16A_04.jpg
https://www.janhas.net/Files/Image/Large_images/F-16A_05.jpg
https://www.janhas.net/Files/Image/Large_images/F-16A_06.jpg
https://www.janhas.net/Files/Image/Large_images/F-16A_07.jpg
https://www.janhas.net/Files/Image/Large_images/F-16A_08.jpgThat A cockpit ….
-
I hope someday Rypley will finish his work on a model pit. (if also there was a dev interested in doing missing avionics bits …) Ohh man can dream …
Also the sixth pic looks so real …
-
looks superb. like always
-
-
Amazing work Jan!!
Nostalgic, good old days…
Tige dank -
Janhas thank you for your amazing work. Have you ever considered the possibility to make a 3D model for the Singapore BLK52+ ? Singapore BLK 52 and Taiwan (V standard now), Thailand MLU’s ?.
-
Missing the landing gear textures.
-
Missing the landing gear textures.
I forgot to add the gear/engine textures to the final package (basic 1735/1737 and 1739). It’s been fixed.