Solved Jc1 Profile
-
hi, not sure if im doing something wrong, i load the file in target, test it everything is working, i go into the game load the profile all the mapping works for is the throttle and not the stick, only trim works.
Everything I got is working fine but I’m not sure what you tested.
Did you put jc1.key in Falcon BMS 4.35\User\Config
Did you put jc1.tmc in C:\Program Files (x86)\Thrustmaster\Target\scripts
Does the BMS Setup/Controller show Thrustmaster Combined
Does your first line in Falcon BMS 4.35\User\Config\DeviceSorting.txt have Thrustmaster Combined
Does the Target Device Analyzer show the switches and buttons working
Does BMS Setup/Controller show the keypresses in the Input section of the screen -
Version 4.35.1 (Revised), 02/24/21
Changes due to BMS 4.35 (Update 1) and some personal preferences
Eliminated, in jc1.key extra space in line 1475 before 258….SimAPOverride 258
Added the word PULSE+ to jc1.tmc for APALT, APAH and APALT
removed SetSCurve for SCX and SCY in jc1.tmc
changed all Deadzones to “large” in BMS Setup/Controller/Advanced/Avionics
changed AVTR Auto On from LED1 & LED2 to all LEDs
Switched PSB and PSF in jc1.tmc
changed AFResetTrim from 0x1C 4 to 0x3B 4
changed SimElecReset from 0x1C 2 to 0x3C 4
changed SimRightKneePadInc from 0xD2 2 to 0xC9 2
changed SimLeftKneePadInc from 0xC9 2 to 0xD2 2
renamed version number to 4.35.1The corrections caused changes for:
jc1.tmc
jc1.key
jc1_Keyboard_Key Codes-4.35.1.pdf
jc1_Keyboard_Key Labels-4.35.1.pdf
jc1_Device_Throttle-4.35.1.pdfAll my files are available via post #1 of this thread, “jc1 Profile”.
-
Hey JC1, its long time since we spoke took a break for a while but, I’m back again. When we first spoke I wanted to have the shift button on S3 instead of S4 I’m an old user of Muds on page 3 of this thread you gave me a way to switch back to S3. My question is will it still work?. And by the way thanks for the note on power management I was having a problem, not anymore.
Thanks Rhino -
Hi Rhino,
Glad you’re back into BMS Falcon. Since 4.33 there were a lot of changes to key file that necessitated changes to tmc file. So the way to switch back on page 3 won’t work.
-
Well Hell, is there a way to do it, or should I say could you give me a hand. I’ve never been good at writing script and it been almost a year since I’ve even tried. It would be greatly appericated. everything else works and as you know yours is the only file I trust because always works.
Thanks, Rhino
-
Hi Rhino,
I’m providing some changes to my jc1.key and jc1.tmc file. These changes will allow you
to use my Warthog profile using the Pinky as the shift switch instead of the Paddle switch.
I’m gonna continue to stay with the paddle switch as shift key.These changes are good for anyone who likes my profile but prefers the Pinky for shifting.
jc1.tmc file
change line 65 to SetShiftButton(&Joystick, S3);
change line 134 to //keyfile controlled //Pinky for shifting only
change line 136 to //Paddle //S4 DX4
change line 137 to MapKey(&Joystick, S4, TEMPO(PULSE+F12, DX4, 250));
change line 138 to //Short:TrackIR Center, Long:SimAPOverridejc1.key file
change line 1386 to SimHotasPinkyShift 2 -1 -2 0 0x0 -1 //DX3 on the pinky
change line 1389 to SimAPOverride 3 -1 -2 0 0x0 -1 //DX4 on the paddle
change line 1471 to SimHotasPinkyShift 258 -1 -2 0 0x0 -1 //DX3 on the pinky
change line 1475 to SimDoNothing 259 -1 -2 0 0x0 -1 //DX4 on the paddle -
Hey jc1, I made all the changes the other day and everything is working just right. As far as waypoints go I’m just using the rocker switch. It’s not a problem at all. Thanks for taking the time to put together the script. It makes everything so much better for me as you know I have always used the S3 switch. Short fingers I guess.
Thank you again, Rhino
-
Hey jc1, I made all the changes the other day and everything is working just right. As far as waypoints go I’m just using the rocker switch. It’s not a problem at all. Thanks for taking the time to put together the script. It makes everything so much better for me as you know I have always used the S3 switch. Short fingers I guess.
Thank you again, Rhino
Take another look at post #51. I edited it to add a change to line 65. This will enable the Pinky shift to work with all callbacks, including waypoints.
All my files are available via post #1 of this thread, “jc1 Profile”.
-
Yes, I saw that you had added that one so the Coolie switch is back working with Waypoints? Cool, I was just using the rocker which was Ok also but, that’s even better. Hey, there have been a lot of changes since 4.33 and 4.34. Do you have to be on the right frequency for things like tower, tanker, wingman things like that? I was out doing a refresher fly on #11 or something and when I bring up the menu their blank? What’s up with that I figure radio.
Thank again for the work, Rhino
-
Do you have to be on the right frequency for things like tower, tanker, wingman things like that?
Sure do!
-
Icer, Thanks, I kinda thought that they made that change.
-
i would ike to try this key file as well, i know where to replace the key file but want do i do with the TCM files, i have full warthog hotas and mfds. looks like lots of effort when into it. Nice job!
-
i would ike to try this key file as well, i know where to replace the key file but want do i do with the TCM files, i have full warthog hotas and mfds. looks like lots of effort when into it. Nice job!
The place to put the tmc file is C:\program files(x86)\Thrustmaster\Target\scripts
I don’t have MFD devices and jc1.tmc does not handle MFD devices. -
Hey jc1, Have you seen this before (include “target.tmh”) whereas target.tmh is in Red? At the very start of the profile. There are other instances of this throughout the profile, just in a few places. This problem is just not with the S3 version, but also with the jc1 profile. Also, the joystick will not move in x or y in the UI. For some reason, this has happened overnight. Any thoughts.
Rhino
-
Hey jc1, Have you seen this before (include “target.tmh”) whereas target.tmh is in Red? At the very start of the profile. There are other instances of this throughout the profile, just in a few places. This problem is just not with the S3 version, but also with the jc1 profile. Also, the joystick will not move in x or y in the UI. For some reason, this has happened overnight. Any thoughts.
Rhino
If you are referring to the red color in the Target editor, that is normal. Here is where the color options are described
Not sure what you mean by the S3 version.
Also, don’t know why your joystick won’t move. Mine does.
-
-
-
Version 4.35.3 11/15/2021
The changes make it possible to use unshifted switch for Pilot Toggle.
Eject and Target View are now on the throttle. 3rd party video is synchronized with BMS AVTR.Specifically,
Allowed Bandicam video software to use 0x27.
Enabled Track Target to Weapon on throttle EORMOTOR
Changed Motion Freeze to Shifted Coolie Switch Left
Changed Pilot Toggle to Unshifted Coolie Switch Right
Changed Radar Cursor Zero to TMS Switch Shift H2U
Enabled Eject on China Hat, Shifted CHB
Changed FOVToggle to Unshifted Coolie Switch Up
Modified Left Throttle Button to start/stop Bandicam video in sync with BMS AVTRDetails of changes to .tmc and .key files
jc1.tmc Autopilot APALT changed from MapKey(&Throttle, APALT, PULSE+L_CTL+L_ALT+‘d’); to MapKey(&Throttle, APALT, PULSE+L_CTL+L_ALT+‘;’);
jc1.key SimRightAPDown 319 0 0x20 6 0 0 1 “MISC: PITCH Switch - ATT HOLD” changed from 0x27 to 0x20 because Bandicam uses 0x27 for Screen Recording Mode
jc1.tmc changed Engine Operate Right: EORMOTOR DX26 from SimPilotToggle to OTWTrackTargetToWeapon
jc1.key no change for EORMOTOR DX26
jc1.tmc changed Coolie Switch: Shifted CSL DX25 from OTWSelectSatelliteMode to SimMotionFreeze
jc1.key changed BMS 280 to OTWSelectSatelliteMode to SimMotionFreeze
jc1.tmc changed Coolie Switch UnShifted CSR, from FOVToggle to SimPilotToggle
jc1.key changed changed BMS 22 from FOVToggle to SimPilotToggle
jc1.tmc changed TMS Shifted H2U from SimECMOn to SimRadarCursorZero Note: ECM is already CMS Right (Standby) and CMS Down (On)
jc1.key changed BMS 262 from SimECMOn to SimRadarCursorZero
jc1.tmc changed China Hat, Shifted CHB from SimRadarCursorZero to SimEject
jc1.key no change for China Hat, Shifted CHB
jc1.tmc changed Coolie Unshift CSU from SimMotionFreeze to FOVToggle
jc1.key changed BMS 21 from SimMotionFreeze to FOVToggle
jc1.tmc changed Left Throttle Button, shifted LTB to add the “/” key which starts and stops Bandicam videos
jc1.key no change for Left Throttle Button, shifted LTB, BMS 275All my files are available via first post of this thread, “jc1 Profile”.
-
Version 4.36 04/28/2022
Used the new 4.36 BMS - Full.key file and made my changes to it
Key file and TMC file changes through BMS 4.35.3 remain, except the following
changed PSF to SimEpuOn
changed PSM to SimEpuAuto (CKPT: Norm)
changed PSB to SimEpuOff
changed APUON to SimSmokeOn and added to key file
changed APUOFF to SimSmokeOff and added to key file
changed keyfile Pickle, shifted S2 from AFResetTrim to SimPickle
changed keyfile H4P DX19 shifted and unshifted to AFResetTrim
To use ACMI on the shifted LTB throttle button:
1st press = RECORD for Trigger/Pickle 30 second ACMI clips, no video clips, One LED
2nd press = EVENT MARK for continuous ACMI and
video clip if video software is available. I use Bandicam video software, five LEDs3rd press = UNTHRD for turning off ACMI and video clip, no LEDs
All my files are available via first post of this thread, “jc1 Profile”.
-
@jc1 jc1 is discontinuing use of the “Jc1 Profile” for Thrustmaster Warthog. I intended to use Alternative Launcher but found out that that Alternative Launcher could not recognize my devices correctly. I have Thrustmaster Warthog stick/throttle and CH pedals. If I remove the pedals AL is OK with that. If I add the pedals then AL AxisAssignment page thinks my stick and throttle is CH. Also AL can’t handle TrackIR pause. JoyToKey can handle TIR pause but JoyToKey is limited in what it can do. I got to have TIR pause on the throttle POV and make changes to BMS Full.key just as AL does with BMS - Auto.key.
I can do all that with my TARGET script “Jc1 Profile”. However, that Profile prior to BMS 4.36 was limited to 32 DX keys per device. Now with 4.36, 128 DX keys per device are available. I am in the process of finishing my new Thrustmaster TARGET “jc1-DX128 Profile” to make use of the 128 DX keys and should have it ready soon. All, not just 32, buttons and switches as one device will be assigned to the available 128 DX keys. That will make for ease in changing key assignments when desired and also better performance in BMS Falcon.