Ice’s Falcon BMS Profile Updated for BMS 4.37
-
Just curious if anyone - other than me - is having issues with the Course Lines not showing on the CMD Maps with 4.35 U2? I’m using profile version 8 and had it working fine with U1 but since I did a clean install of U2 I can’t get them to appear. I’ve tried all the process steps mentioned throughout this thread (with and without WDP) and they won’t show. Steerpoints and everything else seem to work fine.
No issues, Set up mission, Save Mission, Save DTC, Print Briefing, and hit Reset on Helios Panel. Just ran a bunch of Balkans mission online with a buddy, worked flawlessly…
-
Not sure where, but it was busted on my end. I uninstalled everything and built it back up and it worked. I’m just at basic 4.35 U2 with profile v8 so I’ll see how it goes. I got to a point where I was loading blank info in the MFD no matter what mission I flew so I just decided to punch out while I was early into the evening.
Thanks everyone for the fast feedback as it got me pointed in a better direction and understanding.
-
Not sure where, but it was busted on my end. I uninstalled everything and built it back up and it worked. I’m just at basic 4.35 U2 with profile v8 so I’ll see how it goes. I got to a point where I was loading blank info in the MFD no matter what mission I flew so I just decided to punch out while I was early into the evening.
Thanks everyone for the fast feedback as it got me pointed in a better direction and understanding.
U2 is overwriting your Falcon bms.cfg and disables RTTExtraction.
You have to renewable it otherwise MFD in Helios won’t workGesendet von meinem SM-G930F mit Tapatalk
-
Not sure where, but it was busted on my end. I uninstalled everything and built it back up and it worked. I’m just at basic 4.35 U2 with profile v8 so I’ll see how it goes. I got to a point where I was loading blank info in the MFD no matter what mission I flew so I just decided to punch out while I was early into the evening.
Thanks everyone for the fast feedback as it got me pointed in a better direction and understanding.
Glad to hear you beat it! One thing, if you find the MFD refresh rate a bit slow\annoying you can disable the Helios (MFD) extraction and use the Falcon BMS 4.35\Tools\RTTRemote\RTTClient64.exe for MFDs. Just configure RTTClient.ini to place the MFDs where you want and go… They run perfectly smooth using RTT.
-
Ice’s Falcon BMS Profile Updated to 4.35-8
Updated 25 May 2021:
The first post has been updated with the latest version.
Also added a CPD Only version for those that want to use the CPD without loading the full profile.Thanks again for all your work Linknet! I now have the gauges I need AND a full size map screen again, love it!
-
…the standard kneeboards are not filled with data when they show up?
Inside cpd no problem, the data is there (plan/stpt/comm).yes, I have pressed briefing button in falcon, saved dtc and reset helios profile…
How I can fix it? Thx…
-
…the standard kneeboards are not filled with data when they show up?
Inside cpd no problem, the data is there (plan/stpt/comm).yes, I have pressed briefing button in falcon, saved dtc and reset helios profile…
How I can fix it? Thx…
Do you mean these:
-
Yes, exactly…in the helios file folder this files keep empty, when I press “print briefing” in BMS.
-
…the standard kneeboards are not filled with data when they show up?
Inside cpd no problem, the data is there (plan/stpt/comm).
yes, I have pressed briefing button in falcon, saved dtc and reset helios profile…
How I can fix it? Thx…I may be off but my kneeboards are updated in Weapons Delivery Planner…. The “Plan” tab is updated by Briefing Print, no?
-
I may be off but my kneeboards are updated in Weapons Delivery Planner…. The “Plan” tab is updated by Briefing Print, no?
The profile initially displays the basic kneeboards which are the two panels shown in my previous post and which are generated from the briefing file after you select print. If you select the full kneeboards option from the system menu then the profile displays the BMS kneeboards which can be updated via WDP.
-
…the standard kneeboards are not filled with data when they show up?
Inside cpd no problem, the data is there (plan/stpt/comm).yes, I have pressed briefing button in falcon, saved dtc and reset helios profile…
How I can fix it? Thx…
I can’t quite understand why the kneeboards are blank, in the original download they have default information so they must have been overwritten by DataAutoUpdate.exe. So is the CPD plan/comms info actually up to date with the current mission data or is this still showing the default info from the original download?
-
…the CPD plan/comm info is up to date. The data change with other missions. Is it possible to change the destination of the BIN folder, when I change the folder settings in HELIOS? Or is something hardcoded to c:/bin ?
-
…the CPD plan/comm info is up to date. The data change with other missions. Is it possible to change the destination of the BIN folder, when I change the folder settings in HELIOS? Or is something hardcoded to c:/bin ?
The DataAutoUpdate.exe is hard coded to use the C:\Bin folder. Can you post a screenshot of the contents of the bin folder with the File Explorer view set to Details. And also copy of the PathNames.ini file. Did you change any folder names in the profile?
-
I also got issue on the CPD Plan when I transfered the files on BIN folder to a separate directory. Thanks linknet in confirming that it should be hard coded to drive. After placing the files to drive, CPD Plan now working fine!
-
The DataAutoUpdate.exe is hard coded to use the C:\Bin folder. Can you post a screenshot of the contents of the bin folder with the File Explorer view set to Details. And also copy of the PathNames.ini file. Did you change any folder names in the profile?
; Edit the Falcon BMS command line parameters if required.
; All the other settings will automatically update.; Current Falcon BMS Path.
[FALCON_BMS_PATH]
Path = “D:\Falcon BMS\4.35”
Parameters = “-ef”; Current Falcon BMS Theater.
[CURRENT_THEATER]
Theater = “Korea KTO”; Current Map Folder.
[MAP_FOLDER]
MapFolder = “Korea”; Current Map Segment Size.
[MAP_SEGMENT_SIZE]
MapSegmentSize = “64”; Current Pilot Callsign.
[PILOT_CALLSIGN]
Callsign = “Cop49th”I didn’t change any path setting in helios. I have deleted the bin folder and cockpit files and reinstalled all. I deleted my logbook too for a try.
The briefing file in BIN folder updates every time, wenn I press the print button in BMS.In the folder Helios\Images\FalconBMS Images 4.35\Kneeboards the files Auto_Left.png and right keep empty.
-
In the folder Helios\Images\FalconBMS Images 4.35\Kneeboards the files Auto_Left.png and right keep empty.
So far it all seems OK.
So now does the date and time on the Auto_Left.png and Auto_Right.png files change after you press the print button?
Can you download and run this app and let me know if it reports your correct Documents folder.
https://www.mediafire.com/file/nfhg6oeq6mqu8jw/CheckDocumentFolder.exe/file
Is the Helios folder in your Documents folder?
-
no, the files keep the old date and time. I have tried to run the tools in BIN folder as administrator too…no success! Yes, Helios is in Documents folder.
I have tested the tool. It refers to my documents folder where Helios is inside…
Microsoft Antivirus disabled…no change.
-
As a last resort can you download this DataAutoUpdate.exe and temporarily replace the one in the C:\Bin folder with this one.
https://www.mediafire.com/file/qyt4gwwt6rnueui/DataAutoUpdate.exe/file
It should just dump the Auto_Left.png and Auto_Right.png in the C:\Bin folder, they won’t show in the profile, then see if these are updating.
-
Linknet, can you tell me how the profile defines the CPD Map coordinates (and where it pulls the map from)? I would like to use this 2048x2048 map for the MidEast128 theater but it lands on the Map Display incorrectly. I was able to get it into WDP and MC, but all I see is the NE corner in the CPD… Normally the Map (which I am now editing in MC, is 4096x4096…
-
IIRC CPD requires the map to be 4096x4096