Different Air to Air fighting modes? Need help
-
Thanks for the tips. I also tried a few self made AA missions. Now I got a better feel of different modes. I guess it takes practice. However, I still haven’t figured out how to enter ACM slew mode from HOTAS (without using MFD). Seems TMS left has no use in AA fights.
-
You enter SLEW by… slewing the cursor
-
3. when you switch into dogfight mode the heater goes Bore and the HUD displays “NO RAD”. After selecting a ACM mode with the TMS the heater is slaved. Bore does not alert the target RWR. good for ambush.
4. if the FCR is has lock it will stay locked when you change modes. After locking heads-down or heads-up, you can change weapons with the dogfight switch without losen lock. Sometimes I will lock in dogfight and change to MRM to display more info on the the HUD. Sometime I lock with heads-down and change to dogfight mode to fire the heater.
You use the DgFt swith to select you’re best locking mode. After locking use the switch to select weapon.
-
3. when you switch into dogfight mode the heater goes Bore and the HUD displays “NO RAD”. After selecting a ACM mode with the TMS the heater is slaved. Bore does not alert the target RWR. good for ambush.
4. if the FCR is has lock it will stay locked when you change modes. After locking heads-down or heads-up, you can change weapons with the dogfight switch without losen lock. Sometimes I will lock in dogfight and change to MRM to display more info on the the HUD. Sometime I lock with heads-down and change to dogfight mode to fire the heater.
You use the DgFt swith to select you’re best locking mode. After locking use the switch to select weapon.
bore should definitely alert the RWR, if you use bore radar mode and get a lock, thats still a lock - and the RWR should behave accordingly.
-
bore should definitely alert the RWR, if you use bore radar mode and get a lock, thats still a lock - and the RWR should behave accordingly.
It depends on if you are talk’n FCR ACM modes or heaters modes. Since the OP was talk’n DGFT mode I assume he was talk’n heater modes.
And if the OP was talk’n FCR modes Bore is a slaved sub mode.
Bore and slav submodes can be used only in dgft mode?
-
btw, cursor/enable will toggle missile bore/slave modes. Hovever, imo, it is mainly used for 120s.
-
Whoa some confusion is starting to show here.
3. when you switch into dogfight mode the heater goes Bore and the HUD displays “NO RAD”. After selecting a ACM mode with the TMS the heater is slaved. Bore does not alert the target RWR. good for ambush.
The heater does not go to bore in DGFT, it starts out as slaved. The radar goes to ACM 20 and to standby, hence the NO RAD message. The heater does not alert the RWR regardless if its in bore or slave. The radar alerts the RWR if its locked on something, regardless if its in BORE or any other mode. You seem to have heater modes and ACM submodes mixed up.
-
now I see why there is a bug in the heater that no one cares about.
-
What bug?
-
This post is deleted! -
i personally never use radar in WVR/Dogfight mode…if you set your Aim9s to bore mode and use the HMCS you can lock a bandit just by looking at him (be sure to uncage once you’ve got lock), without giving him any RWR warning (as mentioned before).
And i would recommend using the A-A master mode (instead of DGFT mode) to set the Aim9s to bore (the default mode is slave, i believe), and do this long before there’s any chance of combat (there’s no time to switch from slave to bore when you’re already in the middle of a fight!)…because DGFT master mode will automatically use the Aim9 coolant, and the coolant is limited (only about an hours worth).
-
(there’s no time to switch from slave to bore when you’re already in the middle of a fight!)…
i disagree. When first entering DGFT mode the radar is “stand by”. The missile can’t be slaved to a “stand by” FCR, therefore, it must be in BORE or work as if it’s in BORE mode. Unless, somebody tells me that the winder does not growl, uncage, or lock when it’s in slave mode and the FCR is on “stand by”.
Every thing is done HOTAS including silence the radar.
-
i disagree. When first entering DGFT mode the radar is “stand by”. The missile can’t be slaved to a “stand by” FCR, therefore, it must be in BORE or work as if it’s in BORE mode.
It is in slave mode, the fact that the FCR is not tracking something (so there’s nothing to slave to) is irrelevant. Just go in the sim, switch to dogfight and watch the SMS where it says SLAVE.
Unless, somebody tells me that the winder does not growl, uncage, or lock when it’s in slave mode and the FCR is on “stand by”.
Again, irrelevant. The AIM-9 does not work like the AIM-120, in that it gets no data from the radar. To track a target it just needs to be in the seeker’s FOV (the diamond) and the missile be uncaged. What slave mode does is make the seeker follow the radar LOS, so locking up a target means the AIM-9 seeker is automatically looking at it and you just need to uncage. But it works perfectly fine without tracking a target or with the FCR on standby as well, the difference is the seeker will be looking straight ahead and you have to maneuver to get the target in its FOV.
In simpler words, slave or bore mode for the heaters only affects where the seeker head will be looking. The seeker actually tracking a target though is completely independent from radar operation and is all done by the missile itself.
-
I disagree.
It is in slave mode, the fact that the FCR is not tracking something (so there’s nothing to slave to) is irrelevant
It’s very much relevant when talking about using HOTAS to cammand weapon system.
“slave mode”/“bore mode” is irrelevevant. I’ve never changed a heater to “bore mode” to use the heater diamond as a bore sight when the FCR is stand-by.
-
there’s no time to switch from slave to bore when you’re already in the middle of a fight!
Cursor/Enable switch. I think. It switches from slave to bore with the AIM120 so I can only assume it does the same with the AIM9. I’m typically not around by the time engagements become WVR.
-
@RPG:
Yeah what bug?, come on spit it out!, we want to know!!!..…I love heaters, up close dogfighting with the HMCS…awesome!, never noticed any bug though??
The seeker is only slaved when the radar has lock and the seaker is caged. (that’s the way it was in F4AF)
In BMS, if the seaker is uncaged and lock on a target and then the radar is locked on a different target the heater diamond will move to the radar locked target. However, when fired, the heater will track the target that was orginally lock by the seeker. The missile hits the a/c without the diamond.
-
I disagree.
You don’t get to disagree, that’s the way it works. Not my opinion, fact. When the heater is in SLAVE mode, it is in SLAVE mode, whether you agree or not.
It’s very much relevant when talking about using HOTAS to cammand weapon system.
It’s irrelevant as in, the heater can be in SLAVE mode but not slaved to anything. It can also be in BORE mode, but not aligned with the boresight. What mode the missile is in, is described by… what mode it is in, not the way you use it. When the SMS says SLAVE, then its in SLAVE mode, simple as that. I can also navigate while in AG master mode, that does not mean I am automatically in NAV mode.
“slave mode”/“bore mode” is irrelevevant. I’ve never changed a heater to “bore mode” to use the heater diamond as a bore sight when the FCR is stand-by.
First of all you don’t use the diamond as a boresight, the diamond (seeker head) is aligned with the missile’s boresight. And yes, you don’t need to switch to BORE, what’s your point? Whenever the seeker is caged and not commanded to move (FCR, JHMCS) it is always aligned with the boresight. That does not mean it is in BORE mode. A mode is a software profile of the missile that makes it behave a certain way, much like many other avionics related “modes”, and is only changeable through the SMS or the enable switch. Just because the missile might be doing one thing that might be common to another mode, it does not mean it has magically changed to that mode.
Cursor/Enable switch. I think. It switches from slave to bore with the AIM120 so I can only assume it does the same with the AIM9. I’m typically not around by the time engagements become WVR.
It does do the same with AIM-9, as long as it is depressed it switches from SLAVE to BORE if SLAVE was previously selected, or from BORE to SLAVE if BORE was previously selected.
-
You don’t get to disagree, that’s the way it works. Not my opinion, fact. When the heater is in SLAVE mode, it is in SLAVE mode, whether you agree or not.
LOL,
I disagree. The Heater has no SLAVE mode. When slaved the a/c tells the seeker to look in a dirrection. The heater does not know that the MFD says “SLAVE” or “BORE”.From what I see the heater has a few states.
SPOT/SCAN (not sure if that is internal)
CAGED it can be SLAVED to radar. If not it looks stright a head for BORE sighting.
UNCAGED When uncaged it can track a heat sorce or the a/c can slaves it to HMS until it lock on a heat sorce. (not sure about BMS HMS)The “BORE” option on the MFD should suspends the a/c from slaving the seeker and I don’t know why anyone would use it. It’s not a toggle on the HOTAS.
-
The Heater has no SLAVE mode. When slaved the a/c tells the seeker to look in a dirrection. The heater does not know that the MFD says “SLAVE” or “BORE”.
The heater knows what the MFD says because the aircraft is telling it what to do. Whether this is done internally by the heater or the SMS is again irrelevant, what matters is that the heater has a BORE mode and a SLAVE mode.
SPOT/SCAN (not sure if that is internal)
SPOT/SCAN are different functions from BORE/SLAVE, not sure why you bring those up. The heater can be configured as SPOT-BORE, SCAN-SLAVE or any combination.
CAGED it can be SLAVED to radar. If not it looks stright a head for BORE sighting.
Uhm… no. What it does caged or uncaged depends on if its in BORE or SLAVE and whether there is a target tracked by the FCR. And again, just because it looks along its boresight does not mean its in BORE mode.
UNCAGED When uncaged it can track a heat sorce or the a/c can slaves it to HMS until it lock on a heat sorce. (not sure about BMS HMS)
No. It needs to be in BORE to follow the JHMCS, caged or uncaged is irrelevant.
The “BORE” option on the MFD should suspends the a/c from slaving the seeker and I don’t know why anyone would use it.
Again, no. The BORE option allows it to be slaved to the JHMCS.
It’s not a toggle on the HOTAS.
Yes it is.
It seems to me you have quite a bit of reading to do before you can disagree again.
-
The heater knows what the MFD says because the aircraft is telling it what to do. Whether this is done internally by the heater or the SMS is again irrelevant, what matters is that the heater has a BORE mode and a SLAVE mode.
Just like dumb bomb know what to do?..…they have CCIP mode and CCRP mode because thats what it says on the MFD. Would it be wrong to say that the seeker has BORE and SLAVE mode no matter what the mode is displayed on the MFD? This seem to be the root of your reply.
SPOT/SCAN are different functions from BORE/SLAVE, not sure why you bring those up. The heater can be configured as SPOT-BORE, SCAN-SLAVE or any combination.
just to point out how simple the heater logic is. 120 is very complex.
No. It needs to be in BORE to follow the JHMCS, caged or uncaged is irrelevant.
I question if the BMS model is r/l and would request r/l refferrance if I cared. I have not seen a need for 9X or JHMCS in BMS combat. (not many archer inbounds)
F4AF modeled a system when the heater saw a heat source it would auto lock because it was already uncaged. You didn’t have to hold the sight on the taget and uncage. However, I did see how the heater implementation to the JHMCS and the radar immplimention are similar. Maybe to keep the pilot from being confused. The BMS models favors locking the FCR with the JHMCS and firing the heater slaved to FCR. IIRC I played with a little a while back.
It’s not a toggle on the HOTAS.
Yes it is.
The BMS HOTAS Slave/Bore button is modeled as momentary switch. It’s not a toggle or latch or cycle modes.