Ice’s Falcon BMS Profile Updated for BMS 4.37
-
@CriticalMass It may be too difficult to update that old profile but can we modify the new profile to a 2-screen version again?
-
I’ve put key binds to the following callbacks:
SimExtlMasterOff 115 0 0x14 5 0 0 1 "EXT: MASTER Switch/Knob - OFF" SimExtlMasterCovertAll 116 5 0x4C 3 0 0 1 "EXT: MASTER Knob - ALL" SimExtlMasterCovertAC 116 6 0x4C 5 0 0 1 "EXT: MASTER Knob - A-C" SimExtlMasterCovertForm 116 0 0x13 4 0 0 1 "EXT: MASTER Knob - FORM" SimExtlMasterNorm 115 0 0x14 3 0 0 1 "EXT: MASTER Switch/Knob - NORM"
Initially, these were the original key binds:
SimExtlMasterCovertAll 116 5 0x14 6 0 0 1 "EXT: MASTER Knob - ALL" SimExtlMasterCovertAC 116 6 0x14 7 0 0 1 "EXT: MASTER Knob - A-C"
In either case, Helios does not show CovertAll and CovertAC callbacks. Can someone please confirm if they get the same issue? Thanks!
-
@Atlas said in Ice’s Falcon BMS Profile Updated for BMS 4.35 U3:
SimExtlMasterCovertAll 116 5 0x4C 3 0 0 1 “EXT: MASTER Knob - ALL”
SimExtlMasterCovertAC 116 6 0x4C 5 0 0 1 “EXT: MASTER Knob - A-C”Try
SimExtlMasterCovertAll 116 0 0x4C 3 0 0 1 “EXT: MASTER Knob - ALL”
SimExtlMasterCovertAC 116 0 0x4C 5 0 0 1 “EXT: MASTER Knob - A-C” -
@linknet Ah, I see the error now, thank you!
-
Hi! I am trying to use the CPD profile and it works fine when on 2D, but entering in 3D the buttons doesnt work. The displays update with the current info from game, but for some reason only the buttons are not working.
On the same profile I have a 2nd monitor with my MFDs and they work prefectly. Does anyone know what might be happening?
Thanks!
-
I just figured out and fixed the problem above.
If anyone have the same issue, just set set g_bEnableExclusiveMouseCapture 0 in the config file.
Thanks and awesome work!
-
How can i change the CPD buttons on HELIOS?
Or to use my joysticks buttons?
How can I edit them? -
Nice
-
-
@linknet sigh… typical… just as I was about to finish my profile… Well, I guess I needed more Helios practice anyway! Thanks for the update!
-
@linknet said in Ice’s Falcon BMS Profile Updated for BMS 4.36:
Ice’s Falcon BMS Profile Updated to 4.36-01
Updated 31 May 2022:
The first post has been updated with the latest version.
Please note the requirement for BMS Falcon 4.36 and Helios Version 1.6.5200.1 or later.
Thank you Linknet!
One piddley thing to correct to avoid confusion, the download link still says -Download Combined Full and CPD Only Versions
Download from here for the latest version 4.35-12, but the link is good to the 4.36 version. -
@Icer OK Thanks, now corrected.
-
Thanks for the update.
Would the 4.35 profile still work after updating to 4.36? -
@Falcon316 said in Ice’s Falcon BMS Profile Updated for BMS 4.36:
Thanks for the update.
Would the 4.35 profile still work after updating to 4.36?Replace the Bin folder with the new 4.36-01 Bin folder and I think most of it should still work except for the canopy switch, the external lighting panel, the radio comms panel and the charts which will be out of date.
-
@linknet please note that since Alternative launcher 2.0, it is “BMS - auto.key” that is used instead of “BMS - full.key”. Maybe you could update the install document. Thank You.
-
@Falcon316 said in Ice’s Falcon BMS Profile Updated for BMS 4.36:
@linknet please note that since Alternative launcher 2.0, it is “BMS - auto.key” that is used instead of “BMS - full.key”. Maybe you could update the install document. Thank You.
OK, thanks. I’ve updated the instructions on the web page and included a link to the revised Setup Guide.
The revised Setup Guide will be included in the full download with the next profile update if and when that becomes necessary.
-
@linknet I’m trying to figure out how this works and can’t seem to get it to work in the rampstart TE, does it have to be on a night mission?
The profile supports Instrument Lighting. The gauge backlighting and also the profile overall brightness adjust automatically in accordance with the BMS setting. The Instrument Lighting setting in BMS can be adjusted by swiping up and down on the right hand edge of the Centre Console.
Can someone please show me what it’s supposed to look like with backlighting on? Thanks!
-
@Atlas said in Ice’s Falcon BMS Profile Updated for BMS 4.36:
@linknet I’m trying to figure out how this works and can’t seem to get it to work in the rampstart TE, does it have to be on a night mission?
Just need everything powered up.
-
@linknet Tried it in the Landing TE and very cool!
-
@Atlas said in Ice’s Falcon BMS Profile Updated for BMS 4.36:
@linknet Tried it in the Landing TE and very cool!
Looks great on a night mission with the instrument lighting on full and the room lighting off so that you’re almost in complete darkness. Although if you’re using TrackIR the LED lights might be a nuisance. I use EdTracker so no problems there.