Ice’s Falcon BMS Profile Updated for BMS 4.37
-
@jacqueslees said in Ice’s Falcon BMS Profile Updated for BMS 4.37:
Hi Linknet, I would like to report that besides RWR diamond float mode button and Radio Altimeter switch, the green oxygen regulator switch was also not in sync first time entering 3D.
Ok, thanks. I’ll check that out.
-
@Raphael when you have BMS in 3D bring up task manager and look at your GPU 3D utilization percentage. I was experiencing a delay in gauge movement when BMS was rendering at 4k and even with a 4070ti I found that BMS was pushing the GPU to 98% utilization. Helios needs a little headroom to operate in and a mean 2-3% wasn’t cutting it. Not until I had BMS render at 1440 did I get my smooth gauge movement back. So maybe look at that to see if it’ll help point out where the issue is.
-
-
Just curious if I’m the only one experiencing this, I occasionally get a popup alert when resetting the profile with an error message:
Line 12942 (File 'C:\Bin\AutoDataUpdate.exe)
Error: Unknown function nameI have the latest Helios version installed and everything seems to work fine in BMS and the touchscreen panel once the sim loads. Both types of kneeboards (BMS & WDP) seem to work fine. I can provide any additional information if needed.
-
@Slick8791-0 I’ve never experienced that before, can you determine whether the popup is generated by Helios or by AutoDataUpdate.exe, perhaps you could provide a screenshot?
However, whilst that shouldn’t happen, the question is why do you need to manually reset the profile. It shouldn’t be necessary and in fact can lead to the profile switches and knobs becoming unsynchronised with the controls in BMS. On starting a flight the controls are set for the corresponding flight start mode, Ramp Start, Hot Start or Air Start. Then on exiting the flight the profile is automatically reset. So there shouldn’t be any need to manually reset at any time.
-
@linknet I’ll try to grab a screenshot the next time it happens, but I did write down the exact text. I have my processes slimmed down so I was having problems grabbing the image.
I don’t typically do a profile reset so I may just be outside the normal (or way off on average) The Wife Unit isn’t due back home until tomorrow, so I should be able to test it again this evening and provide an update and any repro steps.
-
This post is deleted! -
@linknet Thanks, will do! I’ll try to provide an update this evening.
-
@linknet No issues at all today. Was able to load up and fly around. No errors when resetting either profile. I guess it was a one-time event but will let you know if it keeps happening. Thanks for the support!!!
-
Just installed Ice’s profile, It has come a really long way it is fantastic! I have spent many dozens of hours on my profile which is based on an early version on Ice’s profile and it doesn’t come close. Thank You!
-
@Amway14
Thanks for the positive comment, much appreciated. -
@Atlas said in Ice’s Falcon BMS Profile Updated for BMS 4.37:
Found the culprit — some issue maybe with high framerates??
I turned on vsync and that fixed all the issues. Tried with triple buffering on and off and didn’t seem to make a difference, so vsync was the key. Stable 120fps all throughout my 3 cycles of climb/dive and Helios was smooth like butter, so smooth I could cry!!
Helios Gauge Lag Delay Fix.
Vsync enabled indeed fixed my lagging gauge display problem.
Posting to make it easier to find in search. -
I had everithing working, but after some windows update or what ever that coursed the errors im getting I dont understand, any help here would be great.
Here is my logfile of the errors from my dropbox:
https://www.dropbox.com/scl/fi/nrrpj54myfvq54vf58kk8/Helios_status_report_133417648294546806.txt?rlkey=ftj54uixr4xxakgy1oins2vii&dl=0Kukki
-
I updated Helios to version: 1.6.6030.1.
Although everything is working fine, the Ice’s Falcon BMS profile is now giving some remarks / errors?Should I worry about these messages?
Thank You!
-
I get those but as long as it runs fine then just ignore them.
-
@linknet Just to keep You updated.
After several tests, the new Helios version finaly gaves me a lot of problems; so I decided to revert to Helios.1.6.6020.0.Problem solved!
Regards
-
The latest Helios version 1.6.6030.1 is throwing an exception to the apostrophe in the profile name. So until this is fixed just rename the profile without the apostrophe.
The problem has been fixed for the next version of Helios.
-
Ice’s Falcon BMS Profile Updated to 4.37-06
Updated 04 December 2023:
The first post has been updated with the latest version.
Please note the requirement for BMS Falcon 4.37 U3 and Helios Version 1.6.6040.3 or later.
Important: After installation run C:\Bin\UnblockFiles.exe to unblock all files.- Updated for BMS Falcon 4.37 U3 and compatible with Helios version 1.6.6040.3 or later. Note: Not compatible with earlier Helios versions.
- Updated the key file to include the latest callback changes.
- Reworked the Threat Warning Prime panel to fix a few issues.
- Corrected various switch positions according to the aircraft start up mode.
- Added an Exit button to the Centre Panel Display.
- Added all of the latest updated Korea charts.
- Requires “set g_bExportRTTTextures 1” to be added to the “Falcon BMS User.cfg” file found in \User\Config.
- Requires “set g_nKnobAccelerationDelta 0” to be added to the “Falcon BMS User.cfg” file found in \User\Config.
-
@linknet - I’m getting this pop-up when I start the latest new profile. (AutoIt Error?)
I’m on the newest Helios and everything seems to work OK, but this
shows up when I start the profile in Control Center, then again when BMS starts up.
Any ideas of what might be wrong? -
@Dan
Once the AutoIt source files are compiled the line numbers become meaningless, so no clue there.The C:\Bin folder contents haven’t changed for this version and in fact have been the same for several previous versions. So if everything was working before this update then possibly one of the files is corrupt or, more likely, still blocked by windows.
First try running the UnblockFiles utility in the C:\Bin folder which will probably solve the issue. If this doesn’t fix it then download the profile again and completely delete and replace the C:\Bin folder together with running the UnblockFiles utility.
-
@linknet thank You for the update!