All your BMS 4.32 screenshots!
-
Textures are 512x512, all buildings are exported then imported with new I.D.'s etc. so all extra added buildings are just copied from existing ones which means they all can be destroyed, crashed into added to objective…whatever!, adding just a few extra buildings adds immersion, here’s one of Wonsan with a few extra factory’s added and extra port…FPS wise: I’ve seen no major effect on FPS so far, but maybe if I over did it with buildings I would??, but for my enjoyment I only need a reasonable extra few buildings and as far as I can see FPS takes no hit so far!?..and no release of anything from me ATM, I’m just posting ideas, I’m not a modder.:D…good drinker though Cheers!.:drink:
-
Textures are 512x512, all buildings are exported then imported with new I.D.'s etc. so all extra added buildings are just copied from existing ones which means they all can be destroyed, crashed into added to objective…whatever!, adding just a few extra buildings adds immersion, here’s one of Wonsan with a few extra factory’s added and extra port…FPS wise: I’ve seen no major effect on FPS so far, but maybe if I over did it with buildings I would??, but for my enjoyment I only need a reasonable extra few buildings and as far as I can see FPS takes no hit so far!?..and no release of anything from me ATM, I’m just posting ideas, I’m not a modder.:D…good drinker though Cheers!.:drink:
More pics please!!!
-
Textures are 512x512, all buildings are exported then imported with new I.D.'s etc. so all extra added buildings are just copied from existing ones which means they all can be destroyed, crashed into added to objective…whatever!, adding just a few extra buildings adds immersion, here’s one of Wonsan with a few extra factory’s added and extra port…FPS wise: I’ve seen no major effect on FPS so far, but maybe if I over did it with buildings I would??, but for my enjoyment I only need a reasonable extra few buildings and as far as I can see FPS takes no hit so far!?..and no release of anything from me ATM, I’m just posting ideas, I’m not a modder.:D…good drinker though Cheers!.:drink:
I agree about ‘reasonable’, try to improve a bit, your fps are stucked at 60.
dema
-
I agree about ‘reasonable’, try to improve a bit, your fps are stucked at 60.
dema
I use V-Sync (60hz monitor)
FPS at Seoul in Day One Campaign Rolling Fire with Inclement weather (raining) was the same roughly with buildings as it was without buildings.
In fact, FPS was higher over the buildings at times, so I think something else is causing Campaign FPS drops, not the buildings.
Without:
With:
-
We are under attack!
They are big!
Guns, Guns, Guns!
-
Hello friends drivers
When I see all these beautiful screens, I’m a little jealous, I admit. I would like my flights are in such magnificent sceneries. Also I would like to ask you all what are the settings you applied. Is what you used SweetFx? Or is it made of retouching with Photoshop?
Thank you for your help.(sorry for my english)
Sincerely, Tigerman. -
KTO
all straight shots, no enhancements
kor7 by sixty6gallons, on Flickr
kor5 by sixty6gallons, on Flickr
kor9 by sixty6gallons, on Flickr
kor6 by sixty6gallons, on Flickr
kor8 by sixty6gallons, on Flickr
kor3 by sixty6gallons, on Flickr
-
-
A little up. Please can you help me ?
Hello friends drivers
When I see all these beautiful screens, I’m a little jealous, I admit. I would like my flights are in such magnificent sceneries. Also I would like to ask you all what are the settings you applied. Is what you used SweetFx? Or is it made of retouching with Photoshop?
Thank you for your help.(sorry for my english)
Sincerely, Tigerman. -
A little up. Please can you help me ?
you would probably have to be more specific about which screen you are referring to….
some users doctor with photoshop, others just take nice shots that accent the best parts of the sim, and hide other stuff. Some have terrain mods, cockpit mods, aircraft mods…
-
Extract from Tuesday’s CAS mission above Seoul at 31st sqn. Nice 'n tight.
Rampstart at Osan AB.
4ship Line-up
4ship Echelon climb
CAS aftermath
Osan AB Tower Fly-by salute!
Formation Landing
Enjoy,
Scub -
KTO
all straight shots, no enhancements
https://farm6.staticflickr.com/5576/14524237199_6c7c173af2_h.jpgkor7 by sixty6gallons, on Flickr
https://farm3.staticflickr.com/2916/14524224830_f951a6e617_h.jpgkor5 by sixty6gallons, on Flickr
https://farm3.staticflickr.com/2928/14708507584_952ddece1b_h.jpgkor9 by sixty6gallons, on Flickr
https://farm4.staticflickr.com/3901/14687904426_e81f8b38ba_h.jpgkor6 by sixty6gallons, on Flickr
https://farm4.staticflickr.com/3860/14524222100_d09f66910d_h.jpgkor8 by sixty6gallons, on Flickr
https://farm6.staticflickr.com/5566/14524229150_e1ce4fe270_h.jpgkor3 by sixty6gallons, on Flickr
New models?
-
-
New models?
No, I don’t have any new models installed just skins, FilipeS Dutch F-16’s neozino’s Mig 31 and Mig 21 and Toms textures.
-
you would probably have to be more specific about which screen you are referring to….
some users doctor with photoshop, others just take nice shots that accent the best parts of the sim, and hide other stuff. Some have terrain mods, cockpit mods, aircraft mods…
Hello crazyjayp,
It is true that my question is not specific enough. I seek to have rendered some images that I have seen in this post.
I will give some examples in the hope that I would have the solutions:I want to know what model is used for ground personnel such as: https://www.benchmarksims.org/forum/showthread.php?18870-All-your-screenshots!&p=273867&viewfull=1#post273867
I love the terrain rendering of Bullseye like this: https://www.benchmarksims.org/forum/showthread.php?18870-All-your-screenshots!&p=273411&viewfull=1#post273411
Or Spades here: https://www.benchmarksims.org/forum/showthread.php?18870-All-your-screenshots!&p=273502&viewfull=1#post273502
Or Slains here: https://www.benchmarksims.org/forum/showthread.php?18870-All-your-screenshots!&p=273867&viewfull=1#post273867
I think I actually need some mods and probably of sweetfx. But I do not want to end up with additions that would disrupt my flight networks.
For Sweetfx there I am completely lost. And especially what come first is the configuration of BMS. Some tell me to disable the multisampling and virtualsync. Others tell me otherwise …
I would have a little more contrast, beautiful rounded, no stairs.
Here’s your help, but all people of goodwill would be greatly appreciated.
Thousand thank you, in advance. :bdance:
-
Or Slains here: https://www.benchmarksims.org/forum/showthread.php?18870-All-your-screenshots!&p=273867&viewfull=1#post273867
I don’t use sweet fx or photoshop or any post processing in screenshots, those are from Balkans 3.0 I may have skins installed but everything else comes with the theatre, similarly some of those other examples look like stock stuff that comes with the theatre like Israel in Spades shots, Bullseyes’s looks like Aegean with Toms textures.
-
I don’t use sweet fx or photoshop or any post processing in screenshots, those are from Balkans 3.0 I may have skins installed but everything else comes with the theatre, similarly some of those other examples look like stock stuff that comes with the theatre like Israel in Spades shots, Bullseyes’s looks like Aegean with Toms textures.
Many thanks Slains. And what is your configuration in BMS (Multisampling or not, virtualsync or not, …). Your planes is very beautiful and i will want the same effects.
-
Many thanks Slains. And what is your configuration in BMS (Multisampling or not, virtualsync or not, …). Your planes is very beautiful and i will want the same effects.
Look on page 7, it sounds to me with the kinds of questions you’re asking that you haven’t tried any other theatres? if you do you will find that a lot of the stuff in them is better than stock Korea, not just the terrain, in Battle for Balkans for example there are new vehicle models, buildings, ground crew, fire crew etc, all of which are improvements on what you will find in stock Korea, although you can make individual improvements to Korea using the LOD editor (F4 experience recommended) just download some theatres and take a look around, I’d start with Israel which is probably the most polished one around.;)
-
Look on page 7, it sounds to me with the kinds of questions you’re asking that you haven’t tried any other theatres? if you do you will find that a lot of the stuff in them is better than stock Korea, not just the terrain, in Battle for Balkans for example there are new vehicle models, buildings, ground crew, fire crew etc, all of which are improvements on what you will find in stock Korea, although you can make individual improvements to Korea using the LOD editor (F4 experience recommended) just download some theatres and take a look around, I’d start with Israel which is probably the most polished one around.;)
Hi, Slains,
We use the theaters Israel, Balkan and Korea. But I also see the details of the devices are sharper with my configuration. Yet I have a big hardware configuration: Asus Maximus Formula VI + I7 4770K + Asus GTX770 + SSD (550MB / s) + Gskill 2400 Mhz. But I can not seem to have a fine aircraft like these screens. I think that it is setup to optimize BMS. And perhaps the Nvidia configuration for BMS.Thank you for all these explanations and good flights.
-
Hi, Slains,
We use the theaters Israel, Balkan and Korea. But I also see the details of the devices are sharper with my configuration. Yet I have a big hardware configuration: Asus Maximus Formula VI + I7 4770K + Asus GTX770 + SSD (550MB / s) + Gskill 2400 Mhz. But I can not seem to have a fine aircraft like these screens. I think that it is setup to optimize BMS. And perhaps the Nvidia configuration for BMS.Thank you for all these explanations and good flights.
In order to get better picture you should play with your Driver settings, there is always a trade-off between AA/MS/SS/AF and performance. You can set all this stuff to maximum in your driver settings, then for any other setting choose only setting which doesn’t try to “optimize”, and this should get you the best picture with your HW.
For example with my current card R9 280X I can get pretty sharp picture if forcing super sampling in driver at highest level but I ditched it because of too high performance hit so I’m using the built-in BMS multi sampling quality 4 in the UI. AF is always set in driver level here to x16 and as far as I tested it has almost no impact on on performance.
Ha and another thing, different drivers tend to produce sometimes different quality with the same HW, it was a long time since I was an expert at getting best quality in Falcon, but what I remember is that once you find a driver which give you the “prefect” quality you like, don’t upgrade anymore from there, because usually it can get only worse.
Cheers!