CTD on every touchdown
-
Quick questions :
-1 - do your crashlogs always look the same ?
DigitalBrain::UpdateTaxipoint() is always the pb ?- 2 - does this happen in all game mode ? TE, Instant Action, Campaign ?
- 3 - can you repeat the pb in an empty TE ? No AI whatsoever, only you ?
- 4 - can you try to land with and without talking to the ATC ?
- 5 - did you update your rig specs in your signature ?
-1 - do your crashlogs always look the same ?
yes
DigitalBrain::UpdateTaxipoint() is always the pb ?
yes- 2 - does this happen in all game mode ? TE, Instant Action, Campaign ?
yes - 3 - can you repeat the pb in an empty TE ? No AI whatsoever, only you ?
same problem - 4 - can you try to land with and without talking to the ATC ?
same problem - 5 - did you update your rig specs in your signature ?
Full specs:
CORE I7 4790K
MAXIMUS VII HERO MB
Corsair 8GB DDR3 1,35V CL9 RAM
CORSAIR FORCE GT 240GB SSD
1tb WD Blue HDD
2x23" Asus VX239H AH-IPS LED Display
NVIDIA GTX 780 Note: latest driver installed
ASUS xonar DGX audio card Note: same problem with both asus xonar and onboard audio.
Sennheiser G4ME1 USB Soundcard Note: tried with this too… same problem
HOTAS Cougar+X-52
TrackIR5
TrackClip Pro
W8 X64
Nvidia Settings for Falcon:
I noticed It happens when I take off without permission from ATC too. At the moment ATC warns me.
-
I am gonna take a wild guess that you have the newest Nvidia driver. I’d say you wanna turn all Multisample anti-aliasing off from the sim and force from the Card, and also turn off the Triple buffering from the game and have your video card handle that through the control panel.
-
I am gonna take a wild guess that you have the newest Nvidia driver. I’d say you wanna turn all Multisample anti-aliasing off from the sim and force from the Card, and also turn off the Triple buffering from the game and have your video card handle that through the control panel.
Not worked
-
Ok, that is definitely weird.
You have a repeatable problem, so that’s bad. However, nobody else has it, so it is most likely a problem in the interaction between your rig/setting/personal karma and BMS. Plus, it will be most likely hard to debug, since we cannot reproduce it.
I cannot garantee you that we will find a solution. But you definitely got my attention, even thought its a bit outside my competences….
Just to be sure, can you try to start from scratch ?
- Uninstall (keeping your logbook and key files, obviously)
- erase leftover files if there is any,
- erase your setup folder,
- re-download everything
- and reinstall ?
I know its a pain, but it would be good to rule out a corrupted file in your installer.
-
Try deleting any files in X:\Falcon BMS 4.32\User\Acmi folder.
And delete the file dx9display.dsp in the X:\Falcon BMS 4.32\User\Config
Just a shot in the dark.
C9
-
I have tried everything but no success… I give up. I am alone with my new $4000 rig and can’t fly Falcon. Terrific. LOL I hate life.
Cheers!
-
I will dig the French forum … someone had the same issue.
Will come back … hopefully with a possible solution for you.
-
Hi, is this happening when YOU are landing? because the crash is in AI code… so it can’t be you… are u sure that it happens when YOU are landing? because otherwise how can you reproduce it in IA/TE?
-
Hi, is this happening when YOU are landing? because the crash is in AI code… so it can’t be you… are u sure that it happens when YOU are landing? because otherwise how can you reproduce it in IA/TE?
Yes. It crashes when my jet’s wheels exactly touch on runway and when I take off without permission from tower.
and I have figured out last night that after every first CTD windows can’t uninstall BMS. I get an error prompt says “an error occurred while trying to uninstall it may have already been uninstalled” when I try to uninstall BMS via windows control panel. Weird.
deep note: After every fresh install I manage to land 3-4 times without CTD.
-
Are you landing the F-16 or some other jet? if some other please say which?
Because where you crash this is digi code which means AI is landing and it’s very weird:
d:\sandbox\bmscode_public\sim*digi*\landme.cppI don’t know what to tell you but for sure you have something weird going on at your end… maybe some weird setting or change that you did, because 4.32 is running for a couple of years now so you can’t be the only one that is crashing at landing if it was some code issue?
Can you try to d/l all the installer content from scratch and reinstall please? what is the size of your base installation? is it normal?
This crash can’t be related to your system.
-
I will dig the French forum … someone had the same issue.
Will come back … hopefully with a possible solution for you.
Thanks.
-
Are you landing the F-16 or some other jet? if some other please say which?
Because where you crash this is digi code which means AI is landing and it’s very weird:
d:\sandbox\bmscode_public\sim*digi*\landme.cppI don’t know what to tell you but for sure you have something weird going on at your end… maybe some weird setting or change that you did, because 4.32 is running for a couple of years now so you can’t be the only one that is crashing at landing if it was some code issue?
Can you try to d/l all the installer content from scratch and reinstall please? what is the size of your base installation? is it normal?
This crash can’t be related to your system.
It does not matter which aircraft I fly. I tried to land with F-5 too. Same problem. I will check my base installation again, although I used it on my old system without any problem.
-
can’t uninstall BMS. I get an error prompt says “an error occurred while trying to uninstall it may have already been uninstalled” when I try to uninstall BMS via windows control panel. Weird.
Never use windows control panel to uninstall BMS but always the BMS Seup program.
-
Never use windows control panel to uninstall BMS but always the BMS Seup program.
Yup. I use that.
-
@ I-HAWK
on the French forum, one guy having the same symptom is reporting this piece of crashlog but not the entire
Crashlogs: ================================== CRASHLOG ===================================== Falcon BMS.exe caused an EXCEPTION_ACCESS_VIOLATION in: 0023:04616897 Falcon BMS.exe, DigitalBrain::UpdateTaxipoint()+487 byte(s), d:\sandbox\bmscode_public\sim\digi\landme.cpp, line 4436+116 byte(s) Exception handler called in UnhandledExceptionHandler. Read from location 0x0A6D6FFC caused an access violation. Bytes at CS:EIP: F3 0F 10 16 8B 45 08 F3 0F 10 4D E0 F3 0F 59 4D Registers: EAX=0x0000FF80 EBX=0x0AC690D0 ECX=0xFFFFFFFD EDX=0x0A6D7008 ESI=0x0A6D6FFC EDI=0xFFFFFFFF EBP=0x15E3F81C ESP=0x15E3F7E0 EIP=0x04616897 FLG=0x00010292 CS=0x0023 DS=0x002B SS=0x002B ES=0x002B FS=0x0053 GS=0x002B ================================== CRASHLOG ===================================== Falcon BMS.exe caused an EXCEPTION_ACCESS_VIOLATION in: 0023:04616897 Falcon BMS.exe, DigitalBrain::UpdateTaxipoint()+487 byte(s), d:\sandbox\bmscode_public\sim\digi\landme.cpp, line 4436+116 byte(s) Exception handler called in UnhandledExceptionHandler. Read from location 0x09116FFC caused an access violation. Bytes at CS:EIP: F3 0F 10 16 8B 45 08 F3 0F 10 4D E0 F3 0F 59 4D Registers: EAX=0x0000FF80 EBX=0x0A9AC608 ECX=0xFFFFFFFD EDX=0x09117008 ESI=0x09116FFC EDI=0xFFFFFFFF EBP=0x15E4F81C ESP=0x15E4F7E0 EIP=0x04616897 FLG=0x00010292 CS=0x0023 DS=0x002B SS=0x002B ES=0x002B FS=0x0053 GS=0x002B
-
What about his system? any info?
-
@ I-HAWK
on the French forum, one guy having the same symptom is reporting this piece of crashlog but not the entire
DJ, do you have a link plz ? I’d like to have a look too.
EDIT : got it, disregard.
What about his system? any info?
No info on config. We asked for additionnal feedback, standby.
-
DJ, do you have a link plz ? I’d like to have a look too.
http://www.checksix-forums.com/viewtopic.php?f=281&t=186744&hilit=CTD
-
http://www.checksix-forums.com/viewtopic.php?f=281&t=186744&hilit=CTD
I found it and edited, but you are too fast for me !
-
So … strange … give give a try with this … in sequence and give a try to each steps:
(of course, backup files!)
1 - Delete the touchdn.ogg (or simply rename it “-touchdn.ogg”)
Try …
2 - Try to uncheck
Cockpit Shadow
Focus ShadowClouds Reflexion
Focus Object ReflectionsTry …
3 - Try 1 + 2.
I do not see why it would works!?! … but it doesn’t cot to give a try.
Please keep us updated.