All your BMS 4.32 screenshots!
-
Hammer! What is this?! Party?
Very nice, sir! -
-
Why is the WIP Mig-19 in the screenshots thread?
Sorry for being OT, … blame Dema, he started posting 3dsMax screenshots, hehehe.
…you would likely get it out the door before me. Just sayin’.
I would’nt bet on that. Just sayin’.
Check PM.@nove
posting RL pics is also OT.
Now put your new photocamera away and move back into your house in front of your PC.Cheers,
LS -
I love to have blames
discover hidden works
beautiful hidden works:rolleyes:
Cheers
-
Why is the WIP Mig-19 in the screenshots thread? It should be in the modding section with its own thread. Screenshots should only be of BMS, not of 3ds Max
Well, if you look with a critical eye you will note that the first pic in post #1701 is the Mig-19 flying in BMS…in other words, a screenshot.
However, technically speaking the other pics in that post are screenshots as well. Note that the title of this thread is “ALL your screenshots!” (bold added).
Cheers.
-
-
new bird in service for the Widows
" Hoover as wingman "
-
-
share it Skins: Bowd:
-
new bird in service for the Widows
http://i1186.photobucket.com/albums/z375/Falcontower/Unbenannt_zpskdxa4y6h.jpg
" Hoover as wingman "
http://i1186.photobucket.com/albums/z375/Falcontower/Unbenannt1_zpsoe7dwm76.jpg
share it Skins
-
share it Skins
A little complicated because it is a skin for a small private squadron, the “Widow Makers”.
So it is not practicable, except IF the creator has an other opinion… ;).
Nikos. -
A few screenies coming from various previous flights
Leader’s aircraft nick ? “Diablo”
Going in fully loaded…
A few minutes later, there has been some expenditures :mrgreen:
-
As a big fan of Janhas work i installed his 3D models onto EMF teater, but i found out that in some cases the dds files were overwriting dds files used at some airports. For example, i had one occasion were after installing one of Janhas 3D model and the dds files, the skin of the shelters at an Italian airbase were replaced with oxygen mask textures. I know the way around that, but i would simply spend too much time chasing which texture to rename etc etc …
After a couple of flights with the basic EMF models… i got used to it … .
Here some shots from one of my training flights with the 340 SQN out of Souda. It was an Anti-Tank mission, i used MK-20D Rockeyes … weapon of choice to pierce 7 inch thick Armor. Maverick was a choice too … but nothing like a ripple release and watch the results on TGP.
One technique i use is to find the targets on TGP, press ICP 7 to access markpoint page (having TGP as SOI), then make sur the asteriks are highlighting “TGP”, go TMS up, then hit ICP 0 to make that markpoint the active steerpoint, and DCS back. So that whenever i go TMS down with TGP as SOI, i am back to my target. I just love the avionics on the F-16.
Courtesy visit to the boys from Tanagra
-
Spooky, when you installed EMF you also agreed in the following:
The modification of the East Mediterranean Front Theatre installation files with any third-party add-ons, payware and/or freeware for which the East Mediterranean Front Theatre developers group does not have any prior agreement with its/their creator(s) (independent developers and/or firms/companies, or any other group) is strictly prohibited.
As also posted in the release thread.
As a big fan of Janhas work i installed his 3D models onto EMF teater, but i found out that in some cases the dds files were overwriting dds files used at some airports. For example, i had one occasion were after installing one of Janhas 3D model and the dds files, the skin of the shelters at an Italian airbase were replaced with oxygen mask textures. I know the way around that, but i would simply spend too much time chasing which texture to rename etc etc …
After a couple of flights with the basic EMF models… i got used to it … .
Here some shots from one of my training flights with the 340 SQN out of Souda. It was an Anti-Tank mission, i used MK-20D Rockeyes … weapon of choice to pierce 7 inch thick Armor. Maverick was a choice too … but nothing like a ripple release and watch the results on TGP.
One technique i use is to find the targets on TGP, press ICP 7 to access markpoint page (having TGP as SOI), then make sur the asteriks are highlighting “TGP”, go TMS up, then hit ICP 0 to make that markpoint the active steerpoint, and DCS back. So that whenever i go TMS down with TGP as SOI, i am back to my target. I just love the avionics on the F-16.
http://i1290.photobucket.com/albums/b539/spooky140/2015-03-27_090433_zps8e0adf4x.jpg
http://i1290.photobucket.com/albums/b539/spooky140/2015-03-27_090818_zpsrgb9kbmw.jpg
http://i1290.photobucket.com/albums/b539/spooky140/2015-03-27_112714_zpsocfuoxpo.jpg
http://i1290.photobucket.com/albums/b539/spooky140/2015-03-27_112234_zpsdoo4e6jq.jpg
http://i1290.photobucket.com/albums/b539/spooky140/2015-03-27_112313_zpsxtsnwshk.jpg
http://i1290.photobucket.com/albums/b539/spooky140/2015-03-27_110553_zpsf6m0fb4v.jpg
Courtesy visit to the boys from Tanagra
http://i1290.photobucket.com/albums/b539/spooky140/2015-03-24_140104_zpsysxzqnin.jpg
-
A little complicated because it is a skin for a small private squadron, the “Widow Makers”.
So it is not practicable, except IF the creator has an other opinion… ;).
Nikos.and he has
" romi " and “Ironman53rd” check PM
-
Spooky, when you installed EMF you also agreed in the following:
As also posted in the release thread.
Copy, my bad. Right now my EMF version is stock version, i did not touch any files. Thanks for the reminder and sorry about hat.
-
On our way to a borked flight plan (Assimi training range on Crete) with nugget Digger on my wing, the weather was nice though in spite of a bit of turbulence around FL160
Cheers, Uwe
-
Copy, my bad. Right now my EMF version is stock version, i did not touch any files. Thanks for the reminder and sorry about hat.
install a new theater, lod or other mod can create some issues.
sometimes you have already installed something with the same dds number.
I had ctd too in the past for that reason, falcon suffers 2 models with the same number skin, so be advice for next time.But…
there’s a solution, as some falcon teacher said:
I think Raptor posted this some weeks ago, I can’t remember, but I saved the info in a file text:
Normal >
Edit > 1 (and at the end repeat these for 2/3/4 etc lods) >
Edit LOD > right mouse click on the yellow markbox, the root lod tree > a new window opens named Node - Root >
click on Textures, another window opens named LOD Texture Data >
select (highlight) the texture number you want to change by double clicking on it, it will show this number above the Change field >
type the new skin texture number and hit change >
Accept (window closing) > Accept (window closing) > SAVEGoTo > Parent record > repeat the process for the rest LODs (2/3/4 etc) > when ready hit update and exit lodeditor > copy the new skin with the new number to the proper folder depending the theater (default Korea is at C:\Falcon BMS 4.32\Data\Terrdata\objects\KoreaObj) and you are ready to go.
I hope it helps
SORRY for OT
-
install a new theater, lod or other mod can create some issues.
sometimes you have already installed something with the same dds number.
I had ctd too in the past for that reason, falcon suffers 2 models with the same number skin, so be advice for next time.But…
there’s a solution, as some falcon teacher said:
I think Raptor posted this some weeks ago, I can’t remember, but I saved the info in a file text:
Normal >
Edit > 1 (and at the end repeat these for 2/3/4 etc lods) >
Edit LOD > right mouse click on the yellow markbox, the root lod tree > a new window opens named Node - Root >
click on Textures, another window opens named LOD Texture Data >
select (highlight) the texture number you want to change by double clicking on it, it will show this number above the Change field >
type the new skin texture number and hit change >
Accept (window closing) > Accept (window closing) > SAVEGoTo > Parent record > repeat the process for the rest LODs (2/3/4 etc) > when ready hit update and exit lodeditor > copy the new skin with the new number to the proper folder depending the theater (default Korea is at C:\Falcon BMS 4.32\Data\Terrdata\objects\KoreaObj) and you are ready to go.
I hope it helps
SORRY for OT
Thank you Dema
Those are good tips, but …i think i will try from now on to simply enjoy BMS with stock models.
-
Thank you Dema
Those are good tips, but …i think i will try from now on to simply enjoy BMS with stock models.
Sure, best thing to do