All your BMS 4.32 screenshots!
-
-
new bird in service for the Widows
" Hoover as wingman "
-
-
share it Skins: Bowd:
-
new bird in service for the Widows
http://i1186.photobucket.com/albums/z375/Falcontower/Unbenannt_zpskdxa4y6h.jpg
" Hoover as wingman "
http://i1186.photobucket.com/albums/z375/Falcontower/Unbenannt1_zpsoe7dwm76.jpg
share it Skins
-
share it Skins
A little complicated because it is a skin for a small private squadron, the “Widow Makers”.
So it is not practicable, except IF the creator has an other opinion… ;).
Nikos. -
A few screenies coming from various previous flights
Leader’s aircraft nick ? “Diablo”
Going in fully loaded…
A few minutes later, there has been some expenditures :mrgreen:
-
As a big fan of Janhas work i installed his 3D models onto EMF teater, but i found out that in some cases the dds files were overwriting dds files used at some airports. For example, i had one occasion were after installing one of Janhas 3D model and the dds files, the skin of the shelters at an Italian airbase were replaced with oxygen mask textures. I know the way around that, but i would simply spend too much time chasing which texture to rename etc etc …
After a couple of flights with the basic EMF models… i got used to it … .
Here some shots from one of my training flights with the 340 SQN out of Souda. It was an Anti-Tank mission, i used MK-20D Rockeyes … weapon of choice to pierce 7 inch thick Armor. Maverick was a choice too … but nothing like a ripple release and watch the results on TGP.
One technique i use is to find the targets on TGP, press ICP 7 to access markpoint page (having TGP as SOI), then make sur the asteriks are highlighting “TGP”, go TMS up, then hit ICP 0 to make that markpoint the active steerpoint, and DCS back. So that whenever i go TMS down with TGP as SOI, i am back to my target. I just love the avionics on the F-16.
Courtesy visit to the boys from Tanagra
-
Spooky, when you installed EMF you also agreed in the following:
The modification of the East Mediterranean Front Theatre installation files with any third-party add-ons, payware and/or freeware for which the East Mediterranean Front Theatre developers group does not have any prior agreement with its/their creator(s) (independent developers and/or firms/companies, or any other group) is strictly prohibited.
As also posted in the release thread.
As a big fan of Janhas work i installed his 3D models onto EMF teater, but i found out that in some cases the dds files were overwriting dds files used at some airports. For example, i had one occasion were after installing one of Janhas 3D model and the dds files, the skin of the shelters at an Italian airbase were replaced with oxygen mask textures. I know the way around that, but i would simply spend too much time chasing which texture to rename etc etc …
After a couple of flights with the basic EMF models… i got used to it … .
Here some shots from one of my training flights with the 340 SQN out of Souda. It was an Anti-Tank mission, i used MK-20D Rockeyes … weapon of choice to pierce 7 inch thick Armor. Maverick was a choice too … but nothing like a ripple release and watch the results on TGP.
One technique i use is to find the targets on TGP, press ICP 7 to access markpoint page (having TGP as SOI), then make sur the asteriks are highlighting “TGP”, go TMS up, then hit ICP 0 to make that markpoint the active steerpoint, and DCS back. So that whenever i go TMS down with TGP as SOI, i am back to my target. I just love the avionics on the F-16.
http://i1290.photobucket.com/albums/b539/spooky140/2015-03-27_090433_zps8e0adf4x.jpg
http://i1290.photobucket.com/albums/b539/spooky140/2015-03-27_090818_zpsrgb9kbmw.jpg
http://i1290.photobucket.com/albums/b539/spooky140/2015-03-27_112714_zpsocfuoxpo.jpg
http://i1290.photobucket.com/albums/b539/spooky140/2015-03-27_112234_zpsdoo4e6jq.jpg
http://i1290.photobucket.com/albums/b539/spooky140/2015-03-27_112313_zpsxtsnwshk.jpg
http://i1290.photobucket.com/albums/b539/spooky140/2015-03-27_110553_zpsf6m0fb4v.jpg
Courtesy visit to the boys from Tanagra
http://i1290.photobucket.com/albums/b539/spooky140/2015-03-24_140104_zpsysxzqnin.jpg
-
A little complicated because it is a skin for a small private squadron, the “Widow Makers”.
So it is not practicable, except IF the creator has an other opinion… ;).
Nikos.and he has
" romi " and “Ironman53rd” check PM
-
Spooky, when you installed EMF you also agreed in the following:
As also posted in the release thread.
Copy, my bad. Right now my EMF version is stock version, i did not touch any files. Thanks for the reminder and sorry about hat.
-
On our way to a borked flight plan (Assimi training range on Crete) with nugget Digger on my wing, the weather was nice though in spite of a bit of turbulence around FL160
Cheers, Uwe
-
Copy, my bad. Right now my EMF version is stock version, i did not touch any files. Thanks for the reminder and sorry about hat.
install a new theater, lod or other mod can create some issues.
sometimes you have already installed something with the same dds number.
I had ctd too in the past for that reason, falcon suffers 2 models with the same number skin, so be advice for next time.But…
there’s a solution, as some falcon teacher said:
I think Raptor posted this some weeks ago, I can’t remember, but I saved the info in a file text:
Normal >
Edit > 1 (and at the end repeat these for 2/3/4 etc lods) >
Edit LOD > right mouse click on the yellow markbox, the root lod tree > a new window opens named Node - Root >
click on Textures, another window opens named LOD Texture Data >
select (highlight) the texture number you want to change by double clicking on it, it will show this number above the Change field >
type the new skin texture number and hit change >
Accept (window closing) > Accept (window closing) > SAVEGoTo > Parent record > repeat the process for the rest LODs (2/3/4 etc) > when ready hit update and exit lodeditor > copy the new skin with the new number to the proper folder depending the theater (default Korea is at C:\Falcon BMS 4.32\Data\Terrdata\objects\KoreaObj) and you are ready to go.
I hope it helps
SORRY for OT
-
install a new theater, lod or other mod can create some issues.
sometimes you have already installed something with the same dds number.
I had ctd too in the past for that reason, falcon suffers 2 models with the same number skin, so be advice for next time.But…
there’s a solution, as some falcon teacher said:
I think Raptor posted this some weeks ago, I can’t remember, but I saved the info in a file text:
Normal >
Edit > 1 (and at the end repeat these for 2/3/4 etc lods) >
Edit LOD > right mouse click on the yellow markbox, the root lod tree > a new window opens named Node - Root >
click on Textures, another window opens named LOD Texture Data >
select (highlight) the texture number you want to change by double clicking on it, it will show this number above the Change field >
type the new skin texture number and hit change >
Accept (window closing) > Accept (window closing) > SAVEGoTo > Parent record > repeat the process for the rest LODs (2/3/4 etc) > when ready hit update and exit lodeditor > copy the new skin with the new number to the proper folder depending the theater (default Korea is at C:\Falcon BMS 4.32\Data\Terrdata\objects\KoreaObj) and you are ready to go.
I hope it helps
SORRY for OT
Thank you Dema
Those are good tips, but …i think i will try from now on to simply enjoy BMS with stock models.
-
Thank you Dema
Those are good tips, but …i think i will try from now on to simply enjoy BMS with stock models.
Sure, best thing to do
-
A few more
-
-
EMF theater, 340 SQN:
Strike mssion at dusk, Loft/LGB Attack with GBU-12 on sea practice targets. F-4 E’s AUP from 339 SQN were playing Red Air, and the target was defended by a SAM-3.
Here my wingman is flying close to me to get trough the weather during the initial portion of the navigation, then we will go down low to 200 feet.
340 SQN, Souda Airbase, Creta:
An F-16 Block 52 + is passing by the lens just before exiting the active runway, this bird is comming back from a TGP/Maverick Attack mission, the airplane was part of a 6 ship package including 343 SQN STAR tasked with SEAD.
Souda Airbase:
The Mountains do provide a nice background and are a nice sight for any pilot taxing from or to te runway.
-
On final at Kunsan… -
On our way to trash some Syrian runways