A Guide to Morphine’s Profile for BMS 4.33 and Beyond
-
Does anyone have an overview of the different switch actions and what the same buttons do when you shift later?
-
@ANE:
Does anyone have an overview of the different switch actions and what the same buttons do when you shift later?
The functions of all the buttons including the shift states is shown in the layout diagrams located in the 4.33 Dropbox. The function of the shift are noted by by an S. For example DMS up + shift = HSD up. Here is a link to the layout diagrams
https://www.dropbox.com/s/ntuudykc2erymz0/FalconBMS_Warthog_Joystick_V2.png?dl=0
https://www.dropbox.com/s/bxszbucjd2pl06j/FalconBMS_Warthog_Throttle_v2.png?dl=0 -
You’re a super star!
-
Gastone,
How do I change the paddle switch back to its original function (AP override)?
-
Gastone,
How do I change the paddle switch back to its original function (AP override)?
In the default profile, the paddle switch is AP override. You may have to hold it for a sec though, as it has two functions, TR center and AP override. If you want to get rid of the center TR part, try commenting out the Paddle lines in the TMC. It should look like this. See if that works.
//Paddle/S4 //MapKey(&Joystick, S4, TEMPO(PULSE+F12, DX4, 500));
-
Awesome thanks!
-
Huge thanks man !
I couldn’t have Morphine’s settings to work, nor was I able to find any working profile, I was about to start mapping every button of the joystick and the throttle one by one… :faint2:
-
Hi Gastone,
Thanks for keeping Morphine’s profile alive :headb:
Excellent job. -
Hello,
I have tried to load in the profile but at the step “select Thrustmaster Combined” I can’t make progress since I do not have the option to select Thrustmaster Combined.
I have tried to just load the profile but either the stick completely unmapped or only the joystick was mapped but not the throttle… -
If i Remember Correctly, It will change to Thrustmaster Combined, if included Target Profile ist running before Starting Sim, right? God it´s been a while…
-
Under Windows 10 and newest TARGET software it shows as Thrustmaster Virtual Game Controller (root).
-
Under Windows 10 and newest TARGET software it shows as Thrustmaster Virtual Game Controller (root).
Not necessarily true. I get thurstmaster combine when I run the script. You need to make sure both target and the driver / firmware are up to date. If you’re running the latest version of target with the old firmware you will likely get thrustmaster Virtual Game Controller (root). As target will not recognize the joystick, resulting in failed run of target. When you get Virtual Root something has gone wrong.
-
Not necessarily true. I get thurstmaster combine when I run the script. You need to make sure both target and the driver / firmware are up to date. If you’re running the latest version of target with the old firmware you will likely get thrustmaster Virtual Game Controller (root). As target will not recognize the joystick, resulting in failed run of target. When you get Virtual Root something has gone wrong.
Has been that way since Windows 1909 update.
I’m only using TARGET on the throttle so that may have something to do with it.
Using the latest TARGET V.3.0.18.328 and stick firmware version 12, (F-18 grip), and throttle version 23.Everything works fine and the scripts run and complete ok.
-
Has been that way since Windows 1909 update.
I’m only using TARGET on the throttle so that may have something to do with it.
Using the latest TARGET V.3.0.18.328 and stick firmware version 12, (F-18 grip), and throttle version 23.Everything works fine and the scripts run and complete ok.
It works for you because, in the case of the morphine script, The majority of outputs for the throttle are keyboard commands. It’s the exception not the rule. There’s about 17 pages of trouble shooting here, plus a few dozen more PM’s. Most of which is because people can’t get target to properly unify the device. See if this work, unplug your hotas, restart the computer, once windows boots, try plugging the HOTAS into different USB ports, run target and see if you get thrustmaster combine. Sometimes that’s all it takes, because of the way Win 10 handles joysticks and registry entries.
Hello,
I have tried to load in the profile but at the step “select Thrustmaster Combined” I can’t make progress since I do not have the option to select Thrustmaster Combined.
I have tried to just load the profile but either the stick completely unmapped or only the joystick was mapped but not the throttle…Run the profile, then in the start menu, type Joy.cpl what joysticks are listed with the device running?
-
Greetings Gastone and thanks for your work. Been using the “pinky/paddle” swap profile. Great stuff. I’ve recently replaced my TFR pedals with the MFG ones.
Night and Day.
Just want to make sure which “Target”’ profile I should be using.
Is it the"Full" or “Full 5”? I read at the beginning of this thread that the “Full 5” cancels the new Thrustmaster pedals. Is that the one I should be using?
Thanks. -
Greetings Gastone and thanks for your work. Been using the “pinky/paddle” swap profile. Great stuff. I’ve recently replaced my TFR pedals with the MFG ones.
Night and Day.
Just want to make sure which “Target”’ profile I should be using.
Is it the"Full" or “Full 5”? I read at the beginning of this thread that the “Full 5” cancels the new Thrustmaster pedals. Is that the one I should be using?
Thanks.Run Full, you only need full 5 if you have the TPR pedals. The only reason there are two versions is because legacy versions of target wont’t work if you exclude the TPR in the script.
-
Gastone, thanks for all your support and excuse if the following issue is already covered. I just start using 4.34 and when I use “Boat Switch” to start DF mode it doesn´t work, even if a press through the keyboard D , C or M. I am using Target V.3.018.328 and I load there: Wartog BMS_ Full_swap.tmc, (I tried also WartogBMS_Full_4_434_Paddle.tmc). In BMS I am using: BMS_Full_&_Morphine_paddle_swap.key. I have a friend that have the same issue. Any idea of what is going wrong? thanks in advance
-
The Keyfile for the paddle swap had a bug. The keyfile wouldn’t load in game, which is why none of your keys worked. I updated the dropbox with a fix. Download the key file again, Reload it in BMS. Should be working.
Edit: The whole profile was messed up. I redid it all, it’s working again. Download and install everything, delete the old version. -
Thanks a lot Gastone. I just downloaded the file Morphine_434_Paddle.key as your suggestion and made a quick test in BMS. Still the same issue, the only way to activate the dogfight mode is to maintain press on D through the keyboard. In addition I can not block a target through TMS UP or the radios Through the “mic switich” also do not work propperly, it doesn´t matter if press the paddle or not, it alway ask to Awacs. In TARGET I loaded WartogBMS_Full_4_434_Paddle.tmc That is no there anymore, the only file I see is in dropbox for paddel switch is Warthog_BMS_Full_5_434_Paddle.tmc
-
Thanks a lot Gastone. I just downloaded the file Morphine_434_Paddle.key as your suggestion and made a quick test in BMS. Still the same issue, the only way to activate the dogfight mode is to maintain press on D through the keyboard. In addition I can not block a target through TMS UP or the radios Through the “mic switich” also do not work propperly, it doesn´t matter if press the paddle or not, it alway ask to Awacs. In TARGET I loaded WartogBMS_Full_4_434_Paddle.tmc That is no there anymore, the only file I see is in dropbox for paddel switch is Warthog_BMS_Full_5_434_Paddle.tmc
Just use the new files. Delete the old ones. Run the script. Hit the start button in windows. type joy.cpl. What joysticks do you see listed?