A Guide to Morphine’s Profile for BMS 4.33 and Beyond
-
Having an issue here, I just reinstalled windows and BMS with it, and now when I run the TARGET script, I’m not seeing “Thrustmaster Combined” in the setup menu or in my windows devices list. I’m only seeing “Thrustmaster Virtual Game Controller (root).” Using the most recent version of TARGET and have never had Teamspreak installed. Any help appreciated, thanks.
-
Having an issue here, I just reinstalled windows and BMS with it, and now when I run the TARGET script, I’m not seeing “Thrustmaster Combined” in the setup menu or in my windows devices list. I’m only seeing “Thrustmaster Virtual Game Controller (root).” Using the most recent version of TARGET and have never had Teamspreak installed. Any help appreciated, thanks.
If you are running Target v3.0.16.615 v2 and the latest version of the profile, available on page 1 of this thread, and are getting root, something is preventing target from creating the combine device. There can be numerous causes for this.
Depending on how you reinstalled windows, there maybe registry errors. Or you haven’t installed the warthog drivers yet. It could be the windows power saving settings. Maybe it’s anti virus software, or Target isn’t pointed at the right directory. It could be some type of windows conflict related to the latest windows update. I really can’t tell based on what info you have provided me. What I can tell is, that the problem is on your end.
As of now the profile works on windows 10 version 1703 OS build 15063.850. The bottom line is that the trouble is on your system. There are to many variables and since I have no knowledge of what is going on with your PC, the only advice I can give you is to follow the steps on page one, and then try and trouble shoot it yourself.
I would start with the Warthog drivers, move onto the power saving, Make sure Target is pointed at it’s install folder, then look at anti virus, and finally windows registry and updates. IE eliminate the easy fixes first.
Hope it helps.
Edit: Just upgraded Win 10 to build 16299.125. Profile and target both work, after a restart.
-
Thanks for those ideas. Will work on this and update with any solution!
-
Sorry guys I have troubles with the profile…when I load it it starts then after a while in the Sim the axis stops working…it happens as I touch the throttle and so it is unusable.
It is not the only script that has the same behavior, but others are for Dcs.
I have win 10 up to the latest updates and the latest drivers and firmware for the warthog.
Can someone point me to a fix?
PS I see only thrustmaster combined in the USB control panel and I tried to uninstall and reinstall both Target and drivers
Inviato dal mio ONEPLUS A5010 utilizzando Tapatalk
-
I think I found a workaround……if I comment all the part regarding the throttle led in the profile it works… someone knows why?
I tried this because I tested mud’s profile and it had not the same problem, then analyzed the differences that could be leading to these freezes…that led me to the LEDs…
The problem is that I like the LEDs functionality of morphine profile and I would like to use it…Inviato dal mio ONEPLUS A5010 utilizzando Tapatalk
-
I think I found a workaround……if I comment all the part regarding the throttle led in the profile it works… someone knows why?
I tried this because I tested mud’s profile and it had not the same problem, then analyzed the differences that could be leading to these freezes…that led me to the LEDs…
The problem is that I like the LEDs functionality of morphine profile and I would like to use it…Inviato dal mio ONEPLUS A5010 utilizzando Tapatalk
Please make sure you have downloaded the most recent version of the profile from the first page of this thread. I have no issues with LED’s. The throttle draws a lot of power, it sounds like your motherboard may not be capable of delivering the amps need to drive it. Your first step in trouble shooting should be to try plugging the throttle into a powered USB hub.
-
I have a USB powered hub and the latest version from this post.
ThanksInviato dal mio ONEPLUS A5010 utilizzando Tapatalk
-
I have a USB powered hub and the latest version from this post.
ThanksInviato dal mio ONEPLUS A5010 utilizzando Tapatalk
If the profile works then stops, check the windows 10 power savings settings. Make sure selective suspend is disabled. Windows has a habit of powering off USB ports if the power savings is in use. You may even have to get into the device manager and disable windows from shutting off power saving. I would also re-download the profile again too if you have been making edits. It’s easy to inadvertently break the profile.
After you trouble shoot windows power saving, if u still have issues Try moving the usb hub to other ports and ot replace your USB hub. The issue sounds like it’s power related on your end. Follow those steps and you’ll eliminate the causality tree for power issues. After, that you’ll have to look at Windows issues.
-
If the profile works then stops, check the windows 10 power savings settings. Make sure selective suspend is disabled. Windows has a habit of powering off USB ports if the power savings is in use. You may even have to get into the device manager and disable windows from shutting off power saving. I would also re-download the profile again too if you have been making edits. It’s easy to inadvertently break the profile.
After you trouble shoot windows power saving, if u still have issues Try moving the usb hub to other ports and ot replace your USB hub. The issue sounds like it’s power related on your end. Follow those steps and you’ll eliminate the causality tree for power issues. After, that you’ll have to look at Windows issues.
Thanks for the heads up….i disabled windows usb powermanagement both in the power profile, and in every singe usb device in the hardware control panel, buth nothing works so far.
The only thing that makes the profile working for now is to comment the parts of the script where there is the led management…so i thing it could be something relating to thrustmaster drivers not managing leds well under windows 10…no one with the same issue? -
Thanks for the heads up….i disabled windows usb powermanagement both in the power profile, and in every singe usb device in the hardware control panel, buth nothing works so far.
The only thing that makes the profile working for now is to comment the parts of the script where there is the led management…so i thing it could be something relating to thrustmaster drivers not managing leds well under windows 10…no one with the same issue?I have windows 10 and no issues with the LEDs.
-
I think I found an error in the keyfile.
SimCMSUp 14 8 -2 0 0x0 0
SimCMSRight 15 8 -2 0 0x0 0
SimCMSDown 16 8 -2 0 0x0 0
SimCMSLeft 17 8 -2 0 0x0 0In the Morphine file, SimCMSLeft is actually SimCmsLeft (MS not capitalized), which make the CMS left button default to down just like CMS down does. You may want to fix and reupload to dropbox. Cheers!
-
I think I found an error in the keyfile.
SimCMSUp 14 8 -2 0 0x0 0
SimCMSRight 15 8 -2 0 0x0 0
SimCMSDown 16 8 -2 0 0x0 0
SimCMSLeft 17 8 -2 0 0x0 0In the Morphine file, SimCMSLeft is actually SimCmsLeft (MS not capitalized), which make the CMS left button default to down just like CMS down does. You may want to fix and reupload to dropbox. Cheers!
Thanks, nice catch. Fixed it in both versions, vanilla and paddle swap. Working fine now.
-
No prob. Question: one thing I use a lot is the 2d pit to do my ramp startup (a lot easier for me trying to move dials with TrackIR moving). I noticed the snap function isn’t mapped anywhere in this profile and maybe I was tired last night, but I couldn’t find anything on the keyboard file to snap around in the 2d pit. On my old CH Fighterstick, they used the POV hat on the stick, with pinky/POV for trimming the stick. I’m afraid to say I’m not much of a DX programmer, would it be possible to change this profile this way since we’re not using the pinky/POV anyway. If not, I can use the keyboard if I can figure out which keys to use. Thanks!
EDIT: Ok, with the light of morn, it looks like the shift-number pad is what I’m looking for and I’ll try when I get home. I still think it would be a good idea to either add the snap view to the POV hat either as the primary or the shift. I think the shift makes more sense for the trimming so you don’t accidentally add trim, which you’d need the pinky shift for.
-
After giving myself a headache trying to figure out TARGET by RTFM, is there anyone out there kind enough to take the Morphine profile, change the trim function from POV to shift-POV and assign the POV hat back to the default cockpit view so I can use it in the 2d cockpit on startup to look around? I could be wrong, but if one knew what they were doing, I’m guessing this wouldn’t take long? You will have my everlasting thanks and I’ll consider naming my next grandchild after you unless you have a really, really weird name
-
After giving myself a headache trying to figure out TARGET by RTFM, is there anyone out there kind enough to take the Morphine profile, change the trim function from POV to shift-POV and assign the POV hat back to the default cockpit view so I can use it in the 2d cockpit on startup to look around? I could be wrong, but if one knew what they were doing, I’m guessing this wouldn’t take long? You will have my everlasting thanks and I’ll consider naming my next grandchild after you unless you have a really, really weird name
No worries target can be tough to get into. Though in this case you don’t have to edit the target files, the TMC ones. To make this kind of change you would need to edit the .key file. If there is something you want to change in the profile, the first thing to do is look at the .tmc file. If it’s a button that says keyfile controlled, you’ll probably be looking at editing a directx setting in the key file. Items like Pinky Switch send keyboard commands. So if you want to change the function of the pinky switch, just edit the keyboard commands there.
Anyway, because this stuff is such a pain and it’s also a great idea, that could be helpful to others, I’ve gone ahead and implemented it. If you all ready have the TMC, no need to download it again, it’s exactly the same. Just download the .key and apply it per the instructions on the first page.
Download Morphine’s Hat View From Below Now included in the primary dropbox, Just use the Hat Views keyfile in game
https://www.dropbox.com/sh/kayxm1llc5qp72d/AAC4vU2S4JvVJh_i-GNSDPBTa?dl=0Edit: Since this code snippet maybe helpful to others who wish to have both trim and hat view in their profile, I’ll provide it below. If you want to add it to your own .key, just make sure you delete all your view and trim hat assignments first.
OTWViewUp 0 -1 -3 0 0x0 0 OTWViewUpRight 0 -1 -3 1 0x0 0 OTWViewRight 0 -1 -3 2 0x0 0 OTWViewDownRight 0 -1 -3 3 0x0 0 OTWViewDown 0 -1 -3 4 0x0 0 OTWViewDownLeft 0 -1 -3 5 0x0 0 OTWViewLeft 0 -1 -3 6 0x0 0 OTWViewUpLeft 0 -1 -3 7 0x0 0 AFElevatorTrimUp 2 -1 -3 0 0x0 0 SimDoNothing 2 -1 -3 1 0x0 0 AFAileronTrimRight 2 -1 -3 2 0x0 0 SimDoNothing 2 -1 -3 3 0x0 0 AFElevatorTrimDown 2 -1 -3 4 0x0 0 SimDoNothing 2 -1 -3 5 0x0 0 AFAileronTrimLeft 2 -1 -3 6 0x0 0 SimDoNothing 2 -1 -3 7 0x0 0
-
you da man!
-
Would be great if you solved this. I’m having the exact same problem, and I don’t really know how to fix it…
-
Wow. Just did some more testing. Ran the .tmc file in TARGET and the throttle just died. Re-booted the computer, the throttle turned on momentarily, but died again as soon as Windows started. Switched to another USB post and the throttle turned on instantly. Ran the .tmc file again and once more the throttle died. Did one final test, and now I actually have three USB ports where the throttle is just dead. The strange thing is that the joystick still works in those “dead” USB ports. Does anyone know what might have happened?
-
This is what Target says after compiling and running:
Running script: C:\Users\Fredrik\Desktop\BMS Warthog profile\Warthog_BMS_Full_4.tmc
Mapped plugin module “C:\Program Files (x86)\Thrustmaster\TARGET\Plugins\sys.dll”
Compile Succeeded.
Physical USB HID devices managed by script!
Currently plugged USB HID devices[1]:
1: “Joystick - HOTAS Warthog” - “USB\VID_044F&PID_0402&REV_0100”
USB HID device with hardware id “VID_044F&PID_0404” cannot be found
Installing filter driver to VID_044F&PID_0402. Please Wait…Script stopped!
Done!
Error:(internal) cannot associate a filter with the selected USB HID device “VID_044F&PID_0402”Runtime Error: STOP request received while running main on line 15 in “C:\Users\Fredrik\Desktop\BMS Warthog profile\Warthog_BMS_Full_4.tmc”
Error:Script run timed out! -
Sometimes when my computer is coming out of sleep, it does that to me. I now restart anytime I’m going to use the Warthog.