Weapon Delivery Planner released
-
Thank you for your effort
regards
-
Hi Falcas
Talk to you about that, no SAM radar. Have the same problem
regards
-
hello Falcas.
I think I found another problem.
When active, AUTO PPT in MAP. Everything is right.But when I go to DTC this is what appears. No Range, No type
regards
-
This is the same bug and fixed.
With a little bit of luck I will release a new version today.Gr Falcas
-
This is the same bug and fixed.
With a little bit of luck I will release a new version today.Gr Falcas
:bowd::bowd::bowd:
-
Hi,
New version of WDP released. Latest version is 3.5.0
The previous version of WDP had some minor issues, so here is a quick update that fixes all these problems.
Changlog here: https://www.benchmarksims.org/forum/showthread.php?5293-Weapon-Delivery-Planner&p=66013#post66013
Download here: http://www.weapondeliveryplanner.nl/download/index.htmlMany thanks goes to Toquemao for coming with the issues and doing a lot of beta testing.
Great work mate!!!In this version there are also some new items again. The Coordination card got some new functions so you have to chance to import and export the separate blocks.
As an example is the codewords block. You can create a list of codewords and re-use them for every next mission.@Toquemao, have a look at the Formations in the flightplan. Just click on one of them after loading a misson.
Enjoy,
Falcas
-
“change to import and export the separate blocks” ???
-
Hi,
New version of WDP released. Latest version is 3.5.0
The previous version of WDP had some minor issues, so here is a quick update that fixes all these problems.
Changlog here: https://www.benchmarksims.org/forum/showthread.php?5293-Weapon-Delivery-Planner&p=66013#post66013
Download here: http://www.weapondeliveryplanner.nl/download/index.htmlMany thanks goes to Toquemao for coming with the issues and doing a lot of beta testing.
Great work mate!!!In this version there are also some new items again. The Coordination card got some new functions so you have to chance to import and export the separate blocks.
As an example is the codewords block. You can create a list of codewords and re-use them for every next mission.@Toquemao, have a look at the Formations in the flightplan. Just click on one of them after loading a misson.
Enjoy,
Falcas
Thank you, for your effort and the WDP and MC.
regards
-
“change to import and export the separate blocks” ???
With block I mean a part of the coordination card.
Codewords, Holding plan, Target Area flow, Refrom plan….
Have a look at it and you understand what I mean.Gr Falcas
-
Hello, Falcas
Asked about the WDP.
is there any possibility of creating, MODIFY our DTC, Map Info, Datacard, coordination Card. etc … Without sending participants TE file. I do not want them to edit, modify or remove information from the TE, itself.
Thank you.
-
Hello, Falcas
Asked about the WDP.
is there any possibility of creating, MODIFY our DTC, Map Info, Datacard, coordination Card. etc … Without sending participants TE file. I do not want them to edit, modify or remove information from the TE, itself.
Thank you.
Hi T,
Sure there is.
That is what the backup function of the datacard if for.
If you save a backup of the datacard and use the “naming” that WDP will give you automatically, you end up with the following in your WDP/datacard directory. (Use the “Cards Directory” button to quickly navigate to these)
WDP/Datacards/“MissionName”/“Package NR”/“Flight Callsign”Pack up the complete “MissionName” (including sub directories) dir and pass that along to the other participants.
Under “Settings” you can set where this datacard directory is located. So you can even point this to a dropbox or cloud ect.The participant has to unpack this in his WDP/Datacards directory.
Then only have to use the “Load Datacard” button and he has all the information it needs.If you don’t want to adjust anything, the ini files and all the datacards, maps ect are located in the WDP/Datacards/“MissionName”/“Package NR”/“Flight Callsign” directory.
In the next version of WDP I will make sure that after you have loaded a backup datacard you can also use the “Save DTC” and the ini will be placed in the correct Falcon directory.
Gr Falcas
-
You can also read the manual…
Mission Planning with WDP, can be found at the download page of the WDP site.http://www.weapondeliveryplanner.nl/files/wdp/Mission%20Planning%20with%20WDP.pdf
See chapter: Managing your datacard.
Gr Falcas
-
also instead of sendig all those u coult just post those pics in a mission thread so that other members are informed… that way all will be in one place as a quick reference and noone can change anything.
-
Hi there FALCAS. First of all, I really want to thank you for your great tool ,and the continuous support you´re giving.
Now, I have a question:
The new DTC/Targets tab has implemented the nice “targeting” screen I used to use from MC (Tgt area, sketch, and coordinates, some times, no directly over the target). Great to see it implemented in WDP!!!
As I haven´t found any description/video, and with a quick overview, I think that “LOAD/BACKUP” under “Backup LINES” will save and restore whatever we fill in the 100 slots we have, and “Clear all targets” and “Save List as jpg” are self explanatory, but …
…The big question I have is: What the “Save DTC” will do?.. Where those information/lines/data goes? and I´m not sure, either, about what the “Callsign” and “TE” buttons does.Thanks in advance.
-
Hey Falcas,
I have a problem since updating to 350. Whenever I try to open a mission I get prompted "failed to craete map 2.345656778 (numbers are incorrect btw).
Furhterore is the timer still neccesary for update4? I can load up the ini in campaign via the dtc and the lines/ppt’s and stuff show up in the ui
Thx,
Slack
-
Hey Falcas,
I have a problem since updating to 350. Whenever I try to open a mission I get prompted "failed to craete map 2.345656778 (numbers are incorrect btw).
Furhterore is the timer still neccesary for update3? I can load up the ini in campaign via the dtc and the lines/ppt’s and stuff show up in the ui
Thx,
Slack
I got the same error as well.
-
when i load a mission the q about this mission and dtc i dont get it… what does it ask and what r the correct answers, I mean when i answer what? I just give a no as the yes seems not to work?
Bit confused here… -
Hi there FALCAS. First of all, I really want to thank you for your great tool ,and the continuous support you´re giving.
Now, I have a question:
The new DTC/Targets tab has implemented the nice “targeting” screen I used to use from MC (Tgt area, sketch, and coordinates, some times, no directly over the target). Great to see it implemented in WDP!!!
As I haven´t found any description/video, and with a quick overview, I think that “LOAD/BACKUP” under “Backup LINES” will save and restore whatever we fill in the 100 slots we have, and “Clear all targets” and “Save List as jpg” are self explanatory, but …
…The big question I have is: What the “Save DTC” will do?.. Where those information/lines/data goes? and I´m not sure, either, about what the “Callsign” and “TE” buttons does.Thanks in advance.
Hi,
Yes, the Load/Backup is for making a backup file that you can use later. Or this file can be given to another user. This way you can make a target list that someone else can use as well.
The “Save DTC” buttons at every tab/place in the program will save your callsign.ini and/or TE.ini. The 100 targets gets saved to the DTC.
At this moment you can create a the list of targets. In the Datacard tab you can find a “Save Datacard” button. When you use this, the Target list gets saved as a JPG (together with all the other cards and maps). This JPG can be printed or you can put them on a tablet or reader.
Why it is saved in the DTC… I can tell you, but then I have to kill you.For the question about the Callsign and TE buttons…
Please read the manual (on the website under Download) or watch these videos.
http://www.weapondeliveryplanner.nl/movies/index.htmlGr Falcas
-
Hey Falcas,
I have a problem since updating to 350. Whenever I try to open a mission I get prompted "failed to craete map 2.345656778 (numbers are incorrect btw).
Furhterore is the timer still neccesary for update4? I can load up the ini in campaign via the dtc and the lines/ppt’s and stuff show up in the ui
Thx,
Slack
Hi Slack,
The problem with the map will be solved in the next release.
You are correct about the timer. In update4 you can use the LOAD button in BMS to load the lines/ppts.
I just didn’t remove the timer function yet.Gr Falcas
-
when i load a mission the q about this mission and dtc i dont get it… what does it ask and what r the correct answers, I mean when i answer what? I just give a no as the yes seems not to work?
Bit confused here…Just an honnest anwser will give you the best result, if you don’t know, use NO.
So that is the straight answer… But what does it do.
If you load a mission, WDP is getting 2 different STPTs list to work with.
In the TE.tac/campaign.cam you have the flightplan for the mission. The coordinates are what you see in the BMS UI.
But you might have creates some precision STPTs for the flight you have selected. Those coordinates most porbably are not the same.
Or you have precision STPTs saved, but they are not for the flight you have selected in WDP.
So what the question is: Did you save the DTC for this flight? Is exactly what it asked you.
If you are sure it is for this flight and you answer YES, the coordinates from the DTC are used in WDP.Clear enough?
Gr Falcas