@wazza69 yes, it could :
Posts made by benco
-
RE: Replaced Viper TQS'?
@MailMan look at this post before RMA: https://forum.falcon-bms.com/post/386065
-
RE: Viper TQS Calibration procedure
@Ebubekir-ĆaÄrı-Åen i had the same issue, i set āLargeā in the āDeadZoneā for āCursor X and Yā in the āAvionics Controlā tab.
-
RE: Viper TQS throttle problem
Before starting a RMA or open a ticket,
try the procedure to recalibrate your Viper TQS here : https://forum.falcon-bms.com/post/386065 -
Viper TQS Calibration procedure
Iāve received a procedure from TM to recalibrate the Viper TQS, i share it here :
https://drive.google.com/file/d/1i8BG-12riwqvIPMwO10oMnzfL4Vx-Zpn/view?usp=sharing
Hope it will help ! -
RE: Thrustmaster TQS LED
Iāve asked TM for a SDK or API to create an interaction tool linked to F4ShareMemory. No answer yet.
If someone know how to sniff out āusb communicationā to build a driverās overlay, youād make me happy ! -
RE: [4.37.3.1 F-16] RWR air spikes depend on radar range displayed
Hi Lorik,
Same for me !
Radar Range and RWR seems to be correlated -
RE: Thrustmaster TQS LED
@Tomcattwo lights are linked with the lollypop position. (In my case)
-
RE: Thrustmaster TQS LED
Hey,
Iāve mapped the TQS LED with TARGET v3.0.23.608 (and Windows 11) :
- Gear Up/Down
- TWA buttons
You can try this sample profile (light) :
Just run TAGERT GUI / Run configuration (from the desktop without BMS) : https://drive.google.com/file/d/1EFBhPFH2jVWmZKSbBqtKeFA2loBJWXh_/view?usp=sharingYou should see the gear lights and TWA buttons come alive.
Hope it will help
-
RE: Hotstarts With Viper TQS
Hey,
I used AL to map the idle detent then edit my .key file to add the two lines created.
In my case with set g_nButtonsPerDevice 64 and my TQS in second position in the DeviceSorting.txt i add this two lines :
SimThrottleIdleDetentBack 81 -1 -2 0 0x0 314
SimThrottleIdleDetentForward 81 -2 -2 0x42 0x0 314Works fine for me,
I hope this could help !
-
RE: Falcon BMS 4.37.3 - Documentation Bug Reports
Document: BMS-Training-Manual.pdf
Page: 49
Original sentence: āOpen the ATC menu Approach page and select āRequest unrestricted approachā by pressing āt t t 4ā.ā
Corrected sentence: āāOpen the ATC menu Approach page and select āRequest unrestricted approachā by pressing āt t t 6ā.āāAll 't t t ā commands should be update with +2 offset
-
RE: 4.37 RTT Issue
If you havenāt uninstalled 4.36 you should have it.
-
RE: 4.37 RTT Issue
Hey Forester1,
You can use the old version if you already haveā¦ Nothing to do, just run it. Otherwise a PrintScreen then an Image editor like GIMP could help you to find the new resolutions to set.
However, the TopMost seems not working as find as the previous versionā¦
Happy new year 2023
-
RE: Falcon MFD Software for android tablets
Tried it, didnt work. Might try it again.
And while we are here if the key file name gets long enough it causes bms to crash when loading it.Yes, you must use a file name less than 30 characters for BMS. I have nothing else to do for me than to load the file (āfind key fileā)
-
RE: Falcon MFD Software for android tablets
Hi,
If you have both versions 4.33 and 4.34 installed, I suggest you to copy your key (4.34) in the path (4.33_path)/user/config then load it using āfind key fileā in the āMFD serverā UI,
you will not need to do it next time, it works for meCheers
-
RE: Morphine's Profile
Hey Cpt Calm,
Have a look at #1 : https://www.benchmarksims.org/forum/showthread.php?32399-A-Guide-to-Morphine%E2%80%99s-Profile-for-BMS-4-33-and-Beyond
You will find a lot of answers
-
RE: Morphine's Profile
@Cpt:
Hi there.
Its been years since ive played falcon. I should have guessed I would run into problems now that ive forgotten everything. i wondered if you could give us a clue into what I might be doing wrong?ive put the key file in the config directory and have run the script. (not sure which tmc to run - but tried both)
i keep getting: Runtime Error: Symbol not found: TWCSThrottle in main ( line 11 in Warthog_BMS_Full_4_434_benco.tmc )
wondered if you could tell me what I might be doing wrong?
undoubtedly me. apprecaite you taking the time to update the file for us. very nice of you kind sirā¦
many thanks.
Hey Cpt Calm,
Are you using the last version of Target UI? -
RE: Morphine's Profile
Hi Benco,
Thank you for your helpā¦as I couldnāt find what was wrong, I downloaded again your files and installed them again and now it worksā¦go figure.
The only question I have is : what are the short cuts to make the pilot appear / disappear ? it is written Alt c; p so I press on all 3 but it doesnāt work. Maybe a function on the joystick/throttle could be good.
best,
PascalI think itās Alt + C (release) then p
-
RE: Morphine's Profile
Hi Benco,
Thank you for your quick answer.
I used your version 5 of your tmc with your key file.
However, when I press the warthog button which was used for NWS with Morphine profile, the outcome with your profile is to remove the pilot in the cockpit.
Is this intended ? Do you have the same outcome ?
Thanks in advance for your answer.
Kind regards,
PascalHi Pascal,
It works fine for me, a capture when i press the button 5 or using the shortcut āshift + !ā
Maybe your keyboard config ? Try the shortcut and tell me.