That is interesting because my hw monitor says the same. But I had also 0-100% inside the MSI Afterburner.
Posts made by Snapper
-
RE: How many of you are using multi monitor setups?
-
RE: How many of you are using multi monitor setups?
Yes Arty I use them already but still the beta version because the latest didn’t support my secondary card anymore. I use a 5450 for my MFDs. I think it runs better with the new drivers.
But the hunt for “TGP frames” continues. Have to test again what happens without shadows, shaders etc. -
RE: How many of you are using multi monitor setups?
Hi,
can someone of you with a multimonitor Setup Point out a few more about the graphic settings. I run 5760x1200 with a Radeon R9 290 OC 4 GB card, CPU is a I7 OC to 4 Ghz. Currently I can get about 30-40 fps over korea. But when it comes to TGP and Mavericks it falls to 15 fps…
I tried to minimize the eyecandy stuff but it seems that I can’t really get more fps out of the game over korea right now. Israel runs better even with activ TGP…
Just want to find out if really need to buy a new gfx card like R9 Fury or GTX 9800(Ti) to get better Frames.What do you think?
-
RE: So excited and then so disappointed..the coaster ride that is f4 bms controller sett
I solved my axis problem….mybe it helps you too plehmann.
I thougt it’s okay to only use the Realsimulator HID Tool to calibrate all the Throttle axises but this is wrong. You need to calibrate your TUSBA still within the windows device settings according to the RS manual . Now my Radar Cursor is centered and I have 100% throttle range. The axies names are a windows issue too. Wählscheibe for example…;)
So for me there was only one problem and it was sitting right in front of my monitor…Hope this helps
Snapper -
RE: So excited and then so disappointed..the coaster ride that is f4 bms controller sett
Not shure if it really helps you but I have the same problem, OS and hardware. I’m also not shure if the problem with the radar cursor relay to BMS or TUSBA Device Tool or Windows10. The OS caused me many troubles with my multimonitor setup, I get lines all over my screens even when I scroll in my browser. This comes and goes…by now unsolved…
In BMS setup I can’t center the radar cursor axis too.My setup:
2 TS MFDs
1 TS Cougar FCC
1 TS Cougar Throttle/HAL sensor mod/TUSBA R2
1 Saitek Rudder Pedals
OS: Windows10
You could check your calibration and deadzones within the TUSBA HID Tool. When I calibrate it there it’s centered when I enter BMS setup but after the first axis movement both axis didn’t return to center again. I also had a hard time with my thottle axis, it works now but I lost about 25% of axisrange and have no idea why.
So I think it’s a TUSBA Tool calibration problem and realsimulator maybe needs to change something. And when this windows10 mouse flikkering continues I for my self will revert to windows7. In 4.32 all Realsimulator TUSBA axis are named correctly within the BMS Setup UI but 4.33 changed that or Windows 10 did…:(
But Windows 10, BMS 4.32 and the same hardware worked before…centered… -
RE: Carrier Task Force ATO
Thx for your assistence. It’s to bad I want to continue with the current campaign file. I will give your file a try anyway Cloud 9. Maybe I only have to wait a few a hours….
-
RE: Carrier Task Force ATO
Maybe a Picture is better than words. Inside MC the 3 carrier squads are not assigned to a airbase. I tried to relocate them to the Kennedy carrier group but after doing so all flight plans from carrier based squads started in the lower left Corner of the theater.
Any ideas? Or are is it to early for the F14/F18s to operate on Day2 (carrier not in the right Position)…. -
Carrier Task Force ATO
Hi,
I’m currently flying a Korean Strong DPRK Iron Fortress campaign. A couple of hours ago american reinforcements arrived at the szene. The carrier group is visable on the map and it’s squadrons can be seen at the top of the Order of Battle. By now the AI didn’t use them and I’m not able to setup flights for the F18s or F14s. It Ends always with a “Bad Timing” message.
Is there a Workaround to setup the carrier squadrons correctly? I simply want to Task AI flights for the carrier squadrons not to do some carrier ops myself.Cheers
Snapper
-
Falcon freezes
Hi there,
today I flew a KTO online mission with 2 buddies. During a engagement my game freezed, before it happened I saw a yellow line on both mfds. I use currently 2 screens for the mfds. Can anybody have a look at the error report and the screenshots. I use the BMS Extractor Tool.
https://dl.dropboxusercontent.com/u/112685203/2014-10-03_224536_crash.txt
Cheers
Snapper
-
RE: DESERT STORM TORNADOS
Wait for the new 3D model…maybe included in 4.33…
-
RE: BMS F18 A and C upgrade - community involvement
Amazing work, what a beauty !!
-
RE: Toms Korea 2014
Hi there,
during some testflights we found out that the Kumi Airstrip tiles are set to a wrong type. Every landing there let your Jet explode. Type should be plane instead ob urban. The Tile # are 2180 and 2181 (HSSTREET2XX and 3XX). Keep on the good work Tom, you did a great jop.Cheers
Snapper
-
RE: OF mods: JanHas, realism patch?
You could use the Bock30 or 32 from Jan and edit the texture numbers inside LE. The Norwegian MLU skins with there light grey color are a good base to build a AGRS skin. I did a Blizzard AGRS skin using that way.
Cheers
Snapper -
RE: CCIP Cockpit Mod
Can somebody confirm the error on the picture. Seems to be a error with the alpha channel of DDS 8004 I think. Without active instrument light the instrument is correct.
There is no such error in the stock pit. I tried to download and copy the files again but the error remains constant. -
RE: OF mods: JanHas, realism patch?
Janhas,
I have a question about your F-16 52+.
I opened F-16 52+ model by LODEditor and found out LOD2,3,4 buttons are inactivated.
What could be wrong with mine?I copied f16bk52+.dat into BMS 4.32\data\sim\acdata folder before running LEv6.23
Check your nLOD setting with the screenshots Janhas did. 1 is wrong should be 4-6 I think, don’t have the files and Lodeditor right now.
Hope it helps…
Snapper
-
RE: Project Licenses Plates
Thx for your answer Eghi, but I wanted to now if it,s possible to have the different numbers on two or more places within one skin. In case of your linked Mig29 that would mean that the licence plate is printed on the tail to.
Maybe a picture is the better way to explain what I mean. This F-16 http://www.f-16.net/units_article156.html carries it’s number on the tail and nose section.
Is this possible within BMS? -
RE: Project Licenses Plates
Is there a way to create airframe numbers on different locations of the plane? The F14s for example carries the numbers on three different places (nose, wings and tail). Some F-16s also have them behind the nose section too.
-
RE: OF mods: JanHas, realism patch?
Wow the walls loke really nice!
Is the F-18 at one of the pictures inside the stock install or a Skin Janhas did (Legancy 18)? Is this a Growler or a trainerversion?Cheers
Snapper
-
RE: BMS F18 A and C upgrade - community involvement
It was the combination of MicroProse Titels like Falcon4 and a Tank simulator for example. I can’t remember the name of the tank sim. They wanted it in the way DCS tries currently with it’s combined forces and other titles.