Merry christmas and have a great newyear
Posts made by Ulti
-
RE: Merry Christmas and happy New Year to everyone
-
RE: Problem with devicesorting.txt
@Icarus said in Problem with devicesorting.txt:
Also, I just realized you can use the launch without setup override. I did not see that option and it appears many did not.
if i use the ‘Launch without setup override’ the file is not affected by BMS.
For now it’s a workaround… for me … -
RE: Problem with devicesorting.txt
@SemlerPDX said in Problem with devicesorting.txt:
@Cop23rd said in Problem with devicesorting.txt:
@airtex2019 'I dont use alternate launcher. The lines with additional controllers are not listet visibly in devicesorting list in read only status, but they are still avtive, when I test the buttons.
If devicesorting file is writable, the lines will be added…Have you ever used Alternative Launcher, even just once to check it out or see what it is like?
Asking in reference to @Icarus reply above:
@Icarus said in Problem with devicesorting.txt:
I had this problem too. Once you use AL even once you cannot get rid of its settings. At least I couldn’t I was forced to reinstall BMS and chose not to put icon on desktop. I made shortcut to old launcher and only used that. Then my DX key file and device order text worked fine. I hope AL stays alternative not only launcher. I use DX key file and do not use AL and don’t really see the need for it personally.
I never used the AL program, so that cannot be the problem.
-
RE: Problem with devicesorting.txt
@SemlerPDX said in Problem with devicesorting.txt:
@Ulti said in Problem with devicesorting.txt:
@SemlerPDX Same problem here with 4.37, no AL just Devicesorting.txt keep overwritten even when i set it to Read Only
Just no way for me to work with this… hope the problem can be solvedAre you running Falcon BMS as an admin?
YES i run as Admin(see pic in the reply above if you don’t know what that is, I don’t wanna assume either way)
Does the text in the file actually change or is it only in the way things work once you are in BMS? Does the last-modified date and time change on this file after you start and later stop the Falcon BMS process?
The text file changes after exiting BMS, my changes are overwritten. date and time changes also
Has this been kicked up the chain to the dev’s yet? Can’t imagine they’ve not seen this thread, not sure if one of the replies here is from one - been awhile and didn’t re-read all 40 posts above.
Not kicked up to the devs yet
-
RE: Problem with devicesorting.txt
@Icarus o.k. thanks for your suggestions, will try that (set override)
-
RE: Problem with devicesorting.txt
@SemlerPDX Same problem here with 4.37, no AL just Devicesorting.txt keep overwritten even when i set it to Read Only
Just no way for me to work with this… hope the problem can be solved -
RE: Falcon BMS 4.37 VR READY "and Beyond" Trailer 4K
Thanks BMS Team for all your effort !
Hope it will work on my Quest II -
RE: Merry Christmas and happy New Year
Merry christmas to you all, BMS forever
-
RE: Welcome to our new home!
Looks great, thanks for all the time and effort you put in to this.
-
RE: [BUG FIXED] RTT Remote - Freezing
This is good information, but could someone provide a link for this newer version of the (same#) 0.6.3.0 MFDE? I seem to have a very hard time finding it! ( 99% chance it is my incompetence, but nevertheless, a link would help!)
Here you go
Greetings Martin
-
RE: HUD brightness in "HUD Only" view is too dark
Hi guys,
I use (ever since 4.3*) ‘Hud Tool’ from Falcashttp://www.weapondeliveryplanner.nl/news.html#hud1
Here you can set the ‘TINT’ to OFF and some other stuff
Just my 2 cents
-
RE: [BUG FIXED] RTT Remote - Freezing
Ok, here is my RTT problem.
My setup 2x1920x1080 (main screen) and 2xmfd screens 800x600 on computer 1, Nvidia1070 8GB.
Second computer connected through network cable running RWR, RTT client.When is use 4.35 with RTT display and server sometimes after x minutes MFD screens freezes.
Also my main screen freezes, sometimes only MFD freeze. Sound continues but i have to ctrl,alt,del out.When is use 4.34 with the same RTT display an server (version delivered by 4.35 setup) screens do not freeze ! All works fine!
So i was thingking, maybe it is not RTT software but BMS4.35 related.For me now back to 4.34……
My 2 eurocents \martin
-
RE: BMS 4.35 trailer
Fantastic news, great job devs!
….waiting for the release…
-
RE: Crash to desktop, unable to run
Unfortunately, your attachments can only be viewed by you (don’t feel bad, it’s a common problem, and it’s not an intuitive system) – check out this post on how to use an image hosting site to get a link you can share here to show images: https://www.benchmarksims.org/forum/showthread.php?17569-Wallpapers&p=553824#post553824
The only image that I can see is this:
https://www.benchmarksims.org/forum/attachment.php?attachmentid=42259&d=1607365084Which shows that you have 4.34.0 Build 19631
It’s important to follow the update method closely, it is not common among PC gaming, and can be finicky if you do not follow each step correctly. If you have any questions, feel free to ask and we’ll all try to help you out, but carefully first read and try to follow that post linked above. Again, best wishes and good luck to you!
Hello SemlerPDX,
i have installed Flacon for more then 10 Years now so the only thing changed here is that i went to Windows10
used the same install method but somehow the installer tells me that the updates are installed… only when i start BMS it says 4.34.0
So now i have found a solution to the problem, in another thread i saw that someone was talking about the SETUP.VER file.
i deleted that one and then i could install the updates again. that worked ! so now BMS tells me version 4.34.4 in the main screen.
Next Balkans installed, now it works like a charm !
I think the problem was that windows had some files READ only in the BMS directory ?
Thanks again for your time (i did now see the 4.34.0 in the main screen!!) -
RE: Crash to desktop, unable to run
OK, this is my problem, i installed BMS 4.34 with updates 1,2,3,4 see attachments.
But when i start BMS it shows that the version i have is 4.34.0 !
Thats why my Balkans will not run CTD.
Thanks SemlerPDX for the headsup !
but now … how do i install 1,2,3,4 when it is already installed ???Hope someone can help me out
-
RE: Crash to desktop, unable to run
Same here, after installing balkans bms4.34.4 will not run. Removed balkans, BMs starts normaly.