X1 color in BMS 4.32, flipped mesh diagonals
-
well, more than year passed and nobody answered X1 issue.
ok,there was a suggestion, howto bypass integrated BMS normal calculation in another thread….But here is more serious issue of the current BMS terrain engine. Why are all diagonals flipped now?
green is previous Falcon4 state…the lake would be flat in original Falcon and inside other F4 versions
http://i844.photobucket.com/albums/ab4/Luk77/lake_ucked_zpsc0b8c574.jpg
http://i844.photobucket.com/albums/ab4/Luk77/03-2_zps7bca779f.jpg
http://i844.photobucket.com/albums/ab4/Luk77/02-3_zps13ee3008.jpg
http://i844.photobucket.com/albums/ab4/Luk77/02a_zpsb88c5b79.jpg
http://i844.photobucket.com/albums/ab4/Luk77/Tatra_lake_zps57e7a29e.jpg…It was just a small sample
It is not very encouraging to spend a lot of time terrain fixing, of the risk some new group making Falcon “face lift” (great tho) could corrupt it…
Is it really so hard to make the direction of diagonals changeable? For example via parametr inside theatre definition file?On those pics where original f4 was ok and new is not… if the projection (lake) was coming to the green axis as it comes now to the red axis wouldn’t you have the same exact problem?
-
No, It was OK with traditional direction.
Falcon 4.0 vanilla, FF, OF, AF:
BMS 4.32:
animated comparison
-
On the first pic turn the lake 90 degrees ain’t the same as second picture?
-
but it is real lake Arty… I tiled it, fine-tunned and flattered it by hand in the past…I dont want to remodel Alpian walley because of bug or failure to comply with the standard (the same with finished coastlines, airbases etc…)
-
You don’t get my point. what if the lake actually was as I describe. Then you would have the same problem.
-
no, I would flatter it according its different position
-
that is why I told - both global directions are possible (with similar limitation in micromanagmant), but can not be changed meanwhile as BMS did…because original Korea creator did it according original rule, the same as me with EU
-
what if this red circled are was at where the arrow points?
you would have to flatten more… I believe same you can do with current. Right?
-
I dont understand what you are talking about.
Of course there are many opposite lakes and airbases I flattered in my theater. This new tessalation is not better.
Even original F4 terrain was created using original tessalation.try to find this area now:
Or model it in TE an try to switch tessalation using “M” key. You will see canyon is destroyed and result is a mess. -
I think you never worked in old terrain view (like many others new age terrain creators). Its easy to understand howto fine-tune terrain mesh, but practise is essential… here 99% people even thaught, high-value is in the middle of the tile…perhaps that is why peolpe are calling for higher terrain resolution instead of higher control over the current resolution.
Simply with original terrain rule, flattering 3 vertices is needed to make something flat(at least triangle). With new rule, flattering different 3 vertices is needed.
It is pitty to flatter 4 vertices (whole tile) all the time…especialy in more dramatic areas…BTW This all is not against possible higher mesh resolution in the future, but quite the opposite
-
:?
-
To nikdy nevyberes
-
-
This post is deleted! -
měl jsi pravdu… :mrgreen:
-
Neztrácej tím čas, tohle už se asi těžko změní zpět. Prostě se ty diagonály teď skládají jinak. Starý engine terénu už opravdu dýchá z posledního.
Odkaď si? Kdyžtak napiš přes PM. Myslím, že už jsme před lety byli v kontaktu, a pokud pořád falcona aktivně lítáš, můžem zajet MP. Moc krajanů tady není.
Dokonce jsem kvuli tobe dopsal hacky a carky
-
Neztrácej tím čas, tohle už se asi těžko změní zpět. Prostě se ty diagonály teď skládají jinak. Starý engine terénu už opravdu dýchá z posledního.
Odkaď si? Kdyžtak napiš přes PM. Myslím, že už jsme před lety byli v kontaktu, a pokud pořád falcona aktivně lítáš, můžem zajet MP. Moc krajanů tady není.
Dokonce jsem kvuli tobe dopsal hacky a carky
According to Forum rules, all post should be in English. A Moderator will be on shortly to confirm.
-
I am sure you clicked here https://www.benchmarksims.org/forum/misc.php?do=vsarules and read fully and found part where it says something about English before enjoyed your moment here, aren’t you?
-
Neztrácej tím čas, tohle už se asi těžko změní zpět. Prostě se ty diagonály teď skládají jinak. Starý engine terénu už opravdu dýchá z posledního.
Odkaď si? Kdyžtak napiš přes PM. Myslím, že už jsme před lety byli v kontaktu, a pokud pořád falcona aktivně lítáš, můžem zajet MP. Moc krajanů tady není.
Dokonce jsem kvuli tobe dopsal hacky a carky
Jo díky, promiň že to tak trvalo, ale byl jsem z toho tak otrávenej, až jsem zapšknul. Teď mi trochu svitla naděje - jeden betatester mi volal, že prý budou mít theátry v budoucnu dedikovaný exáče. Nevíš co je na tom pravdy? Rád bych zase začal občas lítat, včera jsem konečně nainstalil novou verzi…tak se někdy třeba spojíme, budu rád.
Jinak teď žiju už deset let na Benešovsku…kousek ode mě se organizujou slety na Šternberku. Letos zase napodzim…akorát se mi chvíli předtím narodí třetí synek, tak se snad utrhnu na víkend.
Zdar.Thank you. We all are so cool. (Czech has long sentences)
-
I missed that, but yes, please, english only on public posts. Or switch to PM