Flounder's X52 Pro Keyfile/DX Profile for BMS 4.33
-
Frame rate is 4 and 5??? Wow!
Specs. AMD Athalon X4 630 2.8 ghz.,
Ram 6 gig, 64 bit x64 processor.
Nvidia geforce 9100 and I just installed the latest driversReally low end system , time to upgrade
-
Sorry for my ignorance but what speed numbers should I look for in a board, CPU, I am not apposed to a upgrade now that i know it is needed! I have my old computer with a GTX 260 video card in it but it is similar in speed to this computer. I don’t want to go out and buy something only to find out it is not fast enough for BMS 4.33.
tux139 -
-
Just wanted you know I have the 4.33 working,all I did was install a Video card that was in my old xp computer to my W10 computer, don’t laugh, it is a GTX 260! The FPS jumped up to 26 to 33, the game runs, amazing shows the quality of your profile and 4.33. I have another video card coming, a little better, for me I can use the game and am sure it will be limited and have some problems. I know most if not all users have the tracker set up , and the profile is designed around that. Did a good landing but ended up in the drink first time around, couldn’t find the NW steering.I am hoping some one has your profile set up with view buttons ,not with tracker. I am hesitant to change your profile thinking I might screw some thing up,
just wanted to say thanks again am sure you spent countless hours with this,
and is a learning and starting point for me,
thanks Blue you have been more than helpful,
Tux139 -
…. hoping some one has your profile set up with view buttons ,not with tracker. I am hesitant to change your profile thinking I might screw some thing up,
just wanted to say thanks again am sure you spent countless hours with this,
and is a learning and starting point for me,
thanks Blue you have been more than helpful,
Tux139I can do that for you. Takes about 5 minutes. But we have to give something up …. my intent is:
- Put Panning views on the DMS hat;
- Move DMS to a shift state;
- Remove Trim from DMS Shift … you’ll have to adjust it manually or via keyboard;
- Add to keyboard Trim commands (?they might be there already);
- Insure some kind of ‘look forward’ command in on the keyboard … probably 2D/3D default view.
I’ll post the modified keyfile here later. You can just copy and paste it with Notepad.
Edit:
Posted.
Also, look at turning off Shaders, shadows, hi res textures, hi res clouds, hi res particle ini and Per Pixel Lighting in the configurator menu. Any/all of that will give you some additional FPS.
-
OK, for no TrackIR and using Panning Views instead.
The only keyboard changes are on the number pad. Made the Arrow Keys the Trim keys, with view as SHFT-Arrow.
Changes on the stick remove TrackIR Center/Reload …. replaced with “Glance Forward” and “Glance Back”. Moved Trim off the DMS hat, putting views (L/R/U/D) on the DMS Hat unshifted or DMS when shifted:
Copy this whole bunch of keyfile mess (just highlight and copy). Then, open Notepad or a similar plain text editor and paste there. Do a “File -> Save As” and name it [WhateverYouWant].key. Place the keyfile in this folder: x:\Falcon BMS 4.33\User\Config.
Added to Download. See Post #1.
Load the keyfile as shown in the original post (via the BMS Setup UI).
SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "My Private Key File" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "1\. UI & 3RD PARTY SOFTWARE" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 1.01 UI FUNCTIONS ========" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "REM: Hardcoded (not changeable)" SimDoNothing -1 0 0x3B 0 0 1 -0 "UI: IVC Broadcast (Global Comms to 2D & 3D)" SimDoNothing -1 0 0x3C 0 0 1 -0 "UI: IVC Local (Comms only to 2D)" SimDoNothing -1 0 0x1 0 0 0 -0 "UI: Exit Sim - Leave Menu - Abort" SimDoNothing -1 0 0xB7 0 0 0 -0 "UI: Screenshot (See also section 6.06)" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "2\. LEFT CONSOLE" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.04 MANUAL TRIM PANEL ========" SimTrimRollLeft 309 0 0xCB 0 0 0 1 "TRIM: ROLL TRIM Wheel - L WING DN" SimTrimRollRight 309 0 0xCD 0 0 0 1 "TRIM: ROLL TRIM Wheel - R WING DN" SimTrimYawLeft 116 0 0xD2 5 0 0 1 "MANUAL TRIM-Manual yaw Left" SimTrimYawRight 116 0 0xC9 5 0 0 1 "MANUAL TRIM-Manual yaw right" SimTrimNoseUp 309 0 0xC8 0 0 0 1 "TRIM: PITCH TRIM Wheel - NOSE UP" SimTrimNoseDown 309 0 0xD0 0 0 0 1 "TRIM: PITCH TRIM Wheel - NOSE DN" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "REM: Trim-Reset (change @ CKPIT)" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.05 FUEL PANEL ========" SimToggleMasterFuel 316 0 0x3F 6 0 0 1 "FUEL-Master Switch Toggle" SimDecFuelPump 124 0 0x3E 6 0 0 1 "FUEL-Eng Feed Knob Dec" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.07 EXT LIGHTING PANEL ========" SimExtlAntiColl 115 0 0x43 5 0 0 1 "EXT LIGHTNING-Extl Anti Coll" SimExtlWing 115 0 0x44 5 0 0 1 "EXT LIGHTNING-Extl Wing" SimExtlPower 115 0 0x42 5 0 0 1 "EXT LIGHTNING-Extl Power" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.09 ELEC PANEL ========" SimMainPowerDec 310 0 0x3C 6 0 0 1 "ELEC-MAIN PWR Dec" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.11 ECM PANEL ========" SimEcmPowerOff 310 0 0x3F 5 0 0 1 "ECM: OPR Switch - OFF" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.15 MPO PANEL ========" SimMPO 115 0 0x18 0 0 0 1 "MANUAL PITCH-Manual Pitch Switch HOLD" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.17 LEFT SIDE WALL ========" SimSlapSwitch 314 0 0x39 0 0 0 1 "CMDS-Slap Switch" AFCanopyToggle 322 0 0x2E 2 0 0 1 "HANDLE-Open/Close canopy" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.18 SEAT ========" SimEject 117 0 0x12 2 0 0 1 "HANDLE-Eject Handle" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 2.19 THROTTLE QUADRANT SYSTEM ========" SimCursorUp -1 0 0x42 0 0 0 1 "Radar-cursor up" SimCursorDown -1 0 0x43 0 0 0 1 "Radar-cursor down" SimCursorLeft -1 0 0x44 0 0 0 1 "Radar-cursor left" SimCursorRight -1 0 0x57 0 0 0 1 "Radar-cursor right" SimThrottleIdleDetent 314 0 0x17 4 0 0 1 "HOTAS-Idle Detent" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "3\. LEFT AUX CONSOLE" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 3.01 ALT GEAR CONTROL ========" AFAlternateGear 321 0 0x22 4 0 0 1 "HANDLE-Alternate Landing Gear Toggle" AFAlternateGearReset 314 0 0x22 2 0 0 1 "LG Panel-Reset Alt Gear Extension" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 3.03 HMCS PANEL ========" SimHmsSymWheelUp 116 0 0x1B 2 0 0 1 "HMCS-Brightness Up" SimHmsSymWheelDn 116 0 0x1A 2 0 0 1 "HMCS-Brightness Down" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 3.04 CMDS PANEL ========" SimEWSRWRPower 115 0 0x40 5 0 0 1 "CMDS-RWR Power" SimEWSJammerPower 115 0 0x41 5 0 0 1 "CMDS-Jammer Power" SimEWSChaffPower 115 0 0x3D 5 0 0 1 "CMDS-Chaff Power" SimEWSFlarePower 115 0 0x3E 5 0 0 1 "CMDS-Flare Power" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 3.05 GEAR PANEL ========" SimHookToggle 310 0 0x25 0 0 0 1 "LG Panel-Hook Switch" SimParkingBrakeToggle 319 0 0x19 2 0 0 1 "LG Panel-Parking Brake Switch" SimLandingLightToggle 115 0 0x26 2 0 0 1 "LG Panel-Lights Landing Switch" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "4\. CENTER CONSOLE" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 4.01 MISC PANEL ========" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "MISC: ALT REL (Change Pickle @ Stick section)" SimLeftAPSwitch 115 0 0x1E 1 0 0 1 "MISC ARMAMENT-AP Roll Switch Toggle" SimRightAPSwitch 319 0 0x1E 0 0 0 1 "MISC ARMAMENT-AP Pitch Switch Toggle" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 4.02 LEFT EYEBROW ========" SimICPFAck 122 0 0x21 2 0 0 1 "EYE: F ACK Button - Push" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 4.05 LEFT MFD ========" SimCBEOSB_1L 126 0 0x2 6 0 0 1 "LMFD OSB-1" SimCBEOSB_2L 126 0 0x3 6 0 0 1 "LMFD OSB-2" SimCBEOSB_3L 126 0 0x4 6 0 0 1 "LMFD OSB-3" SimCBEOSB_4L 126 0 0x5 6 0 0 1 "LMFD OSB-4" SimCBEOSB_5L 126 0 0x6 6 0 0 1 "LMFD OSB-5" SimCBEOSB_6L 126 0 0x7 6 0 0 1 "LMFD OSB-6" SimCBEOSB_7L 126 0 0x8 6 0 0 1 "LMFD OSB-7" SimCBEOSB_8L 126 0 0x9 6 0 0 1 "LMFD OSB-8" SimCBEOSB_9L 126 0 0xA 6 0 0 1 "LMFD OSB-9" SimCBEOSB_10L 126 0 0xB 6 0 0 1 "LMFD OSB-10" SimCBEOSB_11L 126 0 0x4F 6 0 0 1 "LMFD OSB-11" SimCBEOSB_12L 126 0 0x50 6 0 0 1 "LMFD OSB-12" SimCBEOSB_13L 126 0 0x51 6 0 0 1 "LMFD OSB-13" SimCBEOSB_14L 126 0 0x4B 6 0 0 1 "LMFD OSB-14" SimCBEOSB_15L 126 0 0x4C 6 0 0 1 "LMFD OSB-15" SimCBEOSB_16L 126 0 0x4D 6 0 0 1 "LMFD OSB-16" SimCBEOSB_17L 126 0 0x47 6 0 0 1 "LMFD OSB-17" SimCBEOSB_18L 126 0 0x48 6 0 0 1 "LMFD OSB-18" SimCBEOSB_19L 126 0 0x49 6 0 0 1 "LMFD OSB-19" SimCBEOSB_20L 126 0 0x52 6 0 0 1 "LMFD OSB-20" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 4.06 ICP ========" SimICPCom1 122 0 0xB5 1 0 0 1 "ICP-COM1" SimICPCom2 122 0 0x37 1 0 0 1 "ICP-COM2" SimICPLIST 122 0 0x53 0 0 0 1 "ICP-LIST" SimICPAA 122 0 0x37 0 0 0 1 "ICP-A-A" SimICPAG 122 0 0x4A 0 0 0 1 "ICP-A-G" SimICPNav 122 0 0xB5 0 0 0 1 "ICP-NAV" SimICPTILS 122 0 0x4F 0 0 0 1 "ICP-1-ILS" SimICPALOW 122 0 0x50 0 0 0 1 "ICP-2-ALOW" SimICPTHREE 122 0 0x51 0 0 0 1 "ICP-3" SimICPStpt 122 0 0x4B 0 0 0 1 "ICP-4-STPT" SimICPCrus 122 0 0x4C 0 0 0 1 "ICP-5-CRUS" SimICPSIX 122 0 0x4D 0 0 0 1 "ICP-6-TIME" SimICPMark 122 0 0x47 0 0 0 1 "ICP-7-MARK" SimICPEIGHT 122 0 0x48 0 0 0 1 "ICP-8-FIX" SimICPNINE 122 0 0x49 0 0 0 1 "ICP-9-A-CAL" SimICPZERO 122 0 0x52 0 0 0 1 "ICP-0-M-SEL" SimICPCLEAR 122 0 0xD3 2 0 0 1 "ICP-Reset" SimICPEnter 122 0 0x9C 0 0 0 1 "ICP-Enter" SimICPNext 126 0 0xC9 0 0 0 1 "ICP-Next" SimICPPrevious 126 0 0xD2 0 0 0 1 "ICP-Previous" SimICPDEDUP 120 0 0xC7 0 0 0 1 "ICP-DCS-Up" SimICPDEDDOWN 120 0 0xCF 0 0 0 1 "ICP-DCS-Down" SimICPDEDSEQ 120 0 0xD1 0 0 0 1 "ICP-DCS-Seq" SimICPResetDED 120 0 0xD3 0 0 0 1 "ICP-DCS-Return" SimDriftCO 121 0 0x4E 0 0 0 1 "ICP-Drift C/O Toggle" SimWarnReset 115 0 0x4E 1 0 0 1 "ICP-Warning reset" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 4.10 RIGHT MFD ========" SimCBEOSB_1R 126 0 0x2 5 0 0 1 "RMFD OSB-1" SimCBEOSB_2R 126 0 0x3 5 0 0 1 "RMFD OSB-2" SimCBEOSB_3R 126 0 0x4 5 0 0 1 "RMFD OSB-3" SimCBEOSB_4R 126 0 0x5 5 0 0 1 "RMFD OSB-4" SimCBEOSB_5R 126 0 0x6 5 0 0 1 "RMFD OSB-5" SimCBEOSB_6R 126 0 0x7 5 0 0 1 "RMFD OSB-6" SimCBEOSB_7R 126 0 0x8 5 0 0 1 "RMFD OSB-7" SimCBEOSB_8R 126 0 0x9 5 0 0 1 "RMFD OSB-8" SimCBEOSB_9R 126 0 0xA 5 0 0 1 "RMFD OSB-9" SimCBEOSB_10R 126 0 0xB 5 0 0 1 "RMFD OSB-10" SimCBEOSB_11R 126 0 0x4F 5 0 0 1 "RMFD OSB-11" SimCBEOSB_12R 126 0 0x50 5 0 0 1 "RMFD OSB-12" SimCBEOSB_13R 126 0 0x51 5 0 0 1 "RMFD OSB-13" SimCBEOSB_14R 126 0 0x4B 5 0 0 1 "RMFD OSB-14" SimCBEOSB_15R 126 0 0x4C 5 0 0 1 "RMFD OSB-15" SimCBEOSB_16R 126 0 0x4D 5 0 0 1 "RMFD OSB-16" SimCBEOSB_17R 126 0 0x47 5 0 0 1 "RMFD OSB-17" SimCBEOSB_18R 126 0 0x48 5 0 0 1 "RMFD OSB-18" SimCBEOSB_19R 126 0 0x49 5 0 0 1 "RMFD OSB-19" SimCBEOSB_20R 126 0 0x52 5 0 0 1 "RMFD OSB-20" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "RMFD: GAIN Button - Increase (change @ LMFD)" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "RMFD: GAIN Button - Decrease (change @ LMFD)" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "5\. RIGHT CONSOLE" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 5.01 SNSR PWR PANEL ========" SimFCRPower 311 0 0x40 6 0 0 1 "AVIONICS POWER-Power FCR" SimRALTON 311 0 0x13 4 0 0 1 "SNSR: RDR ALT Switch - ON" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 5.05 AIR COND PANEL ========" SimDecAirSource 124 0 0x3D 6 0 0 1 "AIR COND-AIR SOURCE Knob Dec" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 5.09 AVIONIC POWER PANEL ========" SimFCCPower 310 0 0x41 6 0 0 1 "AVIONICS POWER-Power FCC" SimSMSPower 310 0 0x57 6 0 0 1 "AVIONICS POWER-SMS" SimMFDPower 311 0 0x42 6 0 0 1 "AVIONICS POWER-MFD" SimGPSPower 310 0 0x43 6 0 0 1 "AVIONICS POWER-Power GPS" SimDLPower 310 0 0x57 5 0 0 1 "AVIONICS POWER-Power Datalink" SimMAPPower 310 0 0x44 6 0 0 1 "AVIONICS POWER-MAP" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 5.11 FLIGHT STICK ========" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "REM: Trim-Reset (change @ CKPIT)" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "6\. MISCELLANEOUS" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 6.01 OTHER COCKPIT CALLBACKS ========" ToggleNVGMode -1 0 0x31 0 0 0 1 "Ckpit-NVG" ToggleSmoke -1 0 0x1F 0 0 0 1 "Sim-Smoke Toggle" OTWStepHudColor -1 0 0x23 0 0 0 1 "UFC-HUD Color" AFDragChute -1 0 0x20 2 0 0 1 "LG PANEL-Deploy Drag Chute" SimFuelDump -1 0 0x20 4 0 0 1 "FUEL-Dump Fuel" AFTriggerCatapult -1 0 0x25 1 0 0 1 "Sim-Trigger Catapult" AFWingFoldToggle -1 0 0x11 2 0 0 1 "CKPIT: Wing Fold - Toggle" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 6.04 EXTRA MFD (THIRD) ========" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "TMFD: GAIN Button - Increase (change @ LMFD)" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "TMFD: GAIN Button - Decrease (change @ LMFD)" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 6.05 EXTRA MFD (FOURTH) ========" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "FMFD: GAIN Button - Increase (change @ LMFD)" SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -0 "FMFD: GAIN Button - Decrease (change @ LMFD)" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 6.06 SIMULATION & HARDWARE ========" TimeAccelerateInc -1 0 0xF 1 0 0 1 "Sim-Time Accel Inc" TimeAccelerateDec -1 0 0x3A 1 0 0 1 "Sim-Time Accel Dec" SimOpenChatBox -1 0 0x14 1 0 0 1 "Sim-Chat" SimMotionFreeze -1 0 0x19 1 0 0 1 "Sim-Freeze" SimTogglePaused -1 0 0x19 0 0 0 1 "Sim-Pause" SimDoNothing -1 0 0xB7 0 0 0 -0 "REM: Screenshot (hardcoded, see manual)" SimEndFlight -1 0 0x1 0 0 0 1 "Sim-Exit" OTWToggleFrameRate -1 0 0x21 0 0x2E 4 1 "Sim-Display frame rate" OTWToggleOnlinePlayersDisplay -1 0 0x18 2 0 0 1 "Sim-Show Online Status" CommandsSetKeyCombo -1 0 0x2E 4 0 0 1 "Key Combination" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "7\. VIEWS" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 7.01 VIEW GENERAL CONTROL ========" OTWViewUp -1 0 0xC8 1 0 0 1 "View-rotate up" OTWViewDown -1 0 0xD0 1 0 0 1 "View-rotate down" OTWViewLeft -1 0 0xCB 1 0 0 1 "View-rotate left" OTWViewRight -1 0 0xCD 1 0 0 1 "View-rotate right" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 7.02 VIEW INTERNAL ========" OTWSelectHUDMode -1 0 0x2 0 0 0 1 "View-HUD Only" OTWSelect2DCockpitMode -1 0 0x3 0 0 0 1 "View-2D Cockpit" OTWSelect3DCockpitMode -1 0 0x4 0 0 0 1 "View-Virtual cockpit" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 7.03 VIEW EXTERNAL ========" OTWTrackExternal -1 0 0x9 1 0 0 1 "View-Tracking" OTWTrackTargetToWeapon -1 0 0x9 2 0 0 1 "View-Weapon's target" OTWSelectOrbitMode -1 0 0xB 0 0 0 1 "View-Orbit" OTWSelectAirFriendlyMode -1 0 0x6 0 0 0 1 "View-Friendly" OTWSelectGroundFriendlyMode -1 0 0x6 1 0 0 1 "View-Friendly ground unit" OTWSelectAirEnemyMode -1 0 0x7 0 0 0 1 "View-Enemy aircraft" OTWSelectGroundEnemyMode -1 0 0x7 1 0 0 1 "View-Enemy vehicle" OTWSelectTargetMode -1 0 0x9 0 0 0 1 "View-Target" OTWSelectWeaponMode -1 0 0x8 1 0 0 1 "View-Weapon" OTWSelectSatelliteMode -1 0 0x29 0 0 0 1 "View-Satellite Camera" OTWSelectFlybyMode -1 0 0xA 0 0 0 1 "View-Flyby" OTWSelectIncomingMode -1 0 0x8 0 0 0 1 "View-Incoming" OTWSelectChaseMode -1 0 0xB 1 0 0 1 "View-Chase" OTWSelectNextTopGunView -1 0 0xA 1 0 0 1 "View-Next TopGun View" OTWToggleActionCamera -1 0 0x29 1 0 0 1 "View-Action Camera" OTWToggleEyeFly -1 0 0x17 2 0 0 1 "Sim-Eye Fly" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "8\. RADIO COMMS" #=================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 "======== 8.01 GENERAL RADIO OPTIONS ========" RadioAWACSCommand -1 0 0x10 0 0 0 1 "Radio-AWACS" RadioWingCommand -1 0 0x11 0 0 0 1 "Radio-Wingman command" RadioElementCommand -1 0 0x12 0 0 0 1 "Radio-Element command" RadioFlightCommand -1 0 0x13 0 0 0 1 "Radio-Flight command" RadioTowerCommand -1 0 0x14 0 0 0 1 "Radio-ATC message" RadioTankerCommand -1 0 0x15 0 0 0 1 "Radio-Tanker message" RadioMessageSend -1 0 0x10 0 0XFFFFFFFF 0 -2 "Radio-send message" OTWRadioMenuStep -1 0 0x10 0 0x10 1 -2 "Radio-next menu" OTWRadioMenuStep -1 0 0x10 0 0x10 0 -2 "Radio-next menu" OTWRadioMenuStepBack -1 0 0x10 1 0x10 1 -2 "Radio-previous menu" OTWRadioMenuStepBack -1 0 0x10 1 0x10 0 -2 "Radio-previous menu" RadioMessageSend -1 0 0x11 0 0XFFFFFFFF 0 -2 "Radio-send message" OTWRadioMenuStep -1 0 0x11 0 0x11 1 -2 "Radio-next menu" OTWRadioMenuStep -1 0 0x11 0 0x11 0 -2 "Radio-next menu" OTWRadioMenuStepBack -1 0 0x11 1 0x11 1 -2 "Radio-previous menu" OTWRadioMenuStepBack -1 0 0x11 1 0x11 0 -2 "Radio-previous menu" RadioMessageSend -1 0 0x12 0 0XFFFFFFFF 0 -2 "Radio-send message" OTWRadioMenuStep -1 0 0x12 0 0x12 1 -2 "Radio-next menu" OTWRadioMenuStep -1 0 0x12 0 0x12 0 -2 "Radio-next menu" OTWRadioMenuStepBack -1 0 0x12 1 0x12 1 -2 "Radio-previous menu" OTWRadioMenuStepBack -1 0 0x12 1 0x12 0 -2 "Radio-previous menu" RadioMessageSend -1 0 0x13 0 0XFFFFFFFF 0 -2 "Radio-send message" OTWRadioMenuStep -1 0 0x13 0 0x13 1 -2 "Radio-next menu" OTWRadioMenuStep -1 0 0x13 0 0x13 0 -2 "Radio-next menu" OTWRadioMenuStepBack -1 0 0x13 1 0x13 1 -2 "Radio-previous menu" OTWRadioMenuStepBack -1 0 0x13 1 0x13 0 -2 "Radio-previous menu" RadioMessageSend -1 0 0x14 0 0XFFFFFFFF 0 -2 "Radio-send message" OTWRadioMenuStep -1 0 0x14 0 0x14 1 -2 "Radio-next menu" OTWRadioMenuStep -1 0 0x14 0 0x14 0 -2 "Radio-next menu" OTWRadioMenuStepBack -1 0 0x14 1 0x14 1 -2 "Radio-previous menu" OTWRadioMenuStepBack -1 0 0x14 1 0x14 0 -2 "Radio-previous menu" RadioMessageSend -1 0 0x15 0 0XFFFFFFFF 0 -2 "Radio-send message" OTWRadioMenuStep -1 0 0x15 0 0x15 1 -2 "Radio-next menu" OTWRadioMenuStep -1 0 0x15 0 0x15 0 -2 "Radio-next menu" OTWRadioMenuStepBack -1 0 0x15 1 0x15 1 -2 "Radio-previous menu" OTWRadioMenuStepBack -1 0 0x15 1 0x15 0 -2 "Radio-previous menu" #=================================================================================== #================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -2 "========= HOTAS UNSHIFTED =========" SimTriggerFirstDetent 0 -1 -2 0 0x0 -1 SimPickle 1 -1 -2 0 0x0 -1 OTWGlanceForward 2 -1 -2 0 0x0 -1 SimMissileStep 3 -1 -2 0 0x0 -1 PrettyScreenShot 4 -1 -2 0 0x0 -1 SimHotasPinkyShift 5 -1 -2 0 0x0 -1 AFBrakesToggle 6 -1 -2 0 0x0 -1 SimToggleMissileCage 7 -1 -2 0 0x0 -1 SimArmMasterArm 8 -1 -2 0 0x0 311 SimSafeMasterArm 9 -1 -2 0 0x0 311 SimExtlMasterNorm 10 -1 -2 0 0x0 115 SimExtlMasterOff 11 -1 -2 0 0x0 115 AFGearUp 12 -1 -2 0 0x0 119 AFGearDown 13 -1 -2 0 0x0 118 SimTriggerSecondDetent 14 -1 -2 0 0x0 -1 SimCursorEnable 15 -1 -2 0 0x0 -1 SimRadarRangeStepDown 16 -1 -2 0 0x0 -1 SimRadarRangeStepUp 17 -1 -2 0 0x0 -1 SimRFNorm 18 -1 -2 0 0x0 310 SimTMSUp 19 -1 -2 0 0x0 -1 SimTMSRight 20 -1 -2 0 0x0 -1 SimTMSDown 21 -1 -2 0 0x0 -1 SimTMSLeft 22 -1 -2 0 0x0 -1 SimTransmitCom1 23 -1 -2 0 0x0 -1 SimCommsSwitchRight 24 -1 -2 0 0x0 -1 SimTransmitCom2 25 -1 -2 0 0x0 -1 SimCommsSwitchLeft 26 -1 -2 0 0x0 -1 SimSelectMRMOverride 27 -1 -2 0 0x0 -1 SimDeselectOverride 28 -1 -2 0 0x0 -1 SimSelectSRMOverride 29 -1 -2 0 0x0 -1 SimDoNothing 30 -1 -2 0 0x0 -1 AWACSDeclare 31 -1 -2 0 0x0 -1 OTWViewUp 0 -1 -3 0 0x0 -1 SimDoNothing 0 -1 -3 1 0x0 -1 OTWViewRight 0 -1 -3 2 0x0 -1 SimDoNothing 0 -1 -3 3 0x0 -1 OTWViewDown 0 -1 -3 4 0x0 -1 SimDoNothing 0 -1 -3 5 0x0 -1 OTWViewLeft 0 -1 -3 6 0x0 -1 SimDoNothing 0 -1 -3 7 0x0 -1 #================================================================================== SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -2 "========= HOTAS SHIFTED =========" SimWheelBrakes 256 -1 -2 0 0x0 -1 SimEmergencyJettison 257 -1 -2 0 0x0 123 OTWCheckSix 258 -1 -2 0 0x0 -1 SimCATSwitch 259 -1 -2 0 0x0 115 AFResetTrim 260 -1 -2 0 0x0 -1 SimHotasPinkyShift 261 -1 -2 0 0x0 -1 SimCBEOSB_6L 262 -1 -2 0 0x0 126 SimCBEOSB_8L 263 -1 -2 0 0x0 126 SimLaserArmOn 264 -1 -2 0 0x0 310 SimLaserArmOff 265 -1 -2 0 0x0 310 SimAVTRSwitchOn 266 -1 -2 0 0x0 115 SimAVTRSwitchOff 267 -1 -2 0 0x0 115 SimFuelDoorOpen 268 -1 -2 0 0x0 311 SimFuelDoorClose 269 -1 -2 0 0x0 311 SimDoNothing 270 -1 -2 0 0x0 -1 SimRadarCursorZero 271 -1 -2 0 0x0 -1 SimHSDRangeStepDown 272 -1 -2 0 0x0 -1 SimHSDRangeStepUp 273 -1 -2 0 0x0 -1 SimRFQuiet 274 -1 -2 0 0x0 310 SimCMSUp 275 -1 -2 0 0x0 -1 SimCMSRight 276 -1 -2 0 0x0 -1 SimCMSDown 277 -1 -2 0 0x0 -1 SimCMSLeft 278 -1 -2 0 0x0 -1 SimTransmitCom1 279 -1 -2 0 0x0 -1 SimRadarBarScanChange 280 -1 -2 0 0x0 -1 SimTransmitCom2 281 -1 -2 0 0x0 -1 SimRadarAzimuthScanChange 282 -1 -2 0 0x0 -1 SimSelectMRMOverride 283 -1 -2 0 0x0 -1 SimDeselectOverride 284 -1 -2 0 0x0 -1 SimSelectSRMOverride 285 -1 -2 0 0x0 -1 SimDoNothing 286 -1 -2 0 0x0 -1 AWACSVectorToThreat 287 -1 -2 0 0x0 -1 SimDMSUp 2 -1 -3 0 0x0 -1 SimDoNothing 2 -1 -3 1 0x0 -1 SimDMSRight 2 -1 -3 2 0x0 -1 SimDoNothing 2 -1 -3 3 0x0 -1 SimDMSDown 2 -1 -3 4 0x0 -1 SimDoNothing 2 -1 -3 5 0x0 -1 SimDMSLeft 2 -1 -3 6 0x0 -1 SimDoNothing 2 -1 -3 7 0x0 -1
I have not tested this, but am 99% sure it will work right out of the box.
-
Yes that would be very good, was looking at doing it myself but loading your profile in the Saitek editor couldn’t get an idea in the test function of your keys, you must bed doing it somewhere else.
thanks
tux139 -
Thank you will do as instructed, getting excited about this,
tux139 -
Yes that would be very good, was looking at doing it myself but loading your profile in the Saitek editor couldn’t get an idea in the test function of your keys, you must bed doing it somewhere else.
thanks
tux139Yes, not using the Saitek editor except for cursor slewing (and that only because I have no other choice at the moment) and TeamSpeak PTT. The Saitek profile is almost empty.
ALL other functions are called directly in BMS and edited directly in the keyfile.
In other words, if you want to make changes or adjustments, don’t even bother with the Saitek profile/profile software. Make changes in the BMS keyfile.
-
-
May possibly explain some issues posted in this thread:
Believe it or not, latest madcatz is not compatible with windows 10, even if it pretends to be (unplug the x52 and look what happens…). you have to use a combination of latest 6.x driver (6.x, not 7.x!) and 7.0.17 SST and all will work flawlessly.
Of course you have to do a fresh install of both, so you have to uninstall completely your driver and sst, delete the programmable hotkey enumerators in device manager belongin to x52 and cleaning the voices in the registry that the aforementioned post on reddit named.
I found this by myself, trying several combinations of driver and sst after upgrading to windows 10, and shared on Elite Dangerous forum, where people was doing similar rants. All of them solved their issue.
6.x drivers (if you have 64-bit OS): ftp://ftp.saitek.com/pub/software/full/Saitek_X52_Flight_Controller_SD6_64.exe
6.x drivers (if you have 32-bit OS): ftp://ftp.saitek.com/pub/software/full/Saitek_X52_Flight_Controller_SD6_32.exeSST 7.0.17.2 (if you have 64-bit OS): ftp://ftp.saitek.com/pub/software/full/Smart_Technology_7_0_17_2_64bi.exe
SST 7.0.17.2 (if you have 32-bit OS): ftp://ftp.saitek.com/pub/software/full/Smart_Technology_7_0_17_2_32bi.exe6.x driver + SST 7.0.17.2 + Windows 10 = win/win combination.
-
Hello,
I am completely new to BMS and really want to thank you for your X52 pro profile. I use it without TIR. It is perfectly set for me.
I just have some questions : How can I activate the padlock with your key file? Is the trim reset switch set to the C button? I am not sure to understand the profile image.
Thanks again,
Best regards,
Pierre
-
Hello,
I am completely new to BMS and really want to thank you for your X52 pro profile. I use it without TIR. It is perfectly set for me.
I just have some questions : How can I activate the padlock with your key file? Is the trim reset switch set to the C button? I am not sure to understand the profile image.
Thanks again,
Best regards,
Pierre
Trim reset is the Shifted state of the ‘Fire C Button’. To reset trim, hold the pinky lever, hit the ‘Fire C’ button, then release the pinky lever. Holding the pinky lever is how you access any of the shift state functions.
Padlock is not included. Below are all of the padlock functions with ‘No Key Assigned’. Using notepad or similar, open the key file. Copy the commands below and paste them in to the ‘External Views’ section. Save the keyfile …. be SURE to have a copy of the original, or give the amended keyfile a different name.
in BMS Setup --> Controllers, load this amended keyfile and ‘Apply’. You should be able to assign keys on the keyboard directly in the UI. Be sure to avoid conflicts with existing keyboard commands.
OTWStepNextPadlock -1 0 0XFFFFFFFF 0 0 0 1 "VIEWINT: Padlock next" OTWStepPrevPadlock -1 0 0XFFFFFFFF 0 0 0 1 "VIEWINT: Padlock previous" OTWStepNextPadlockAA -1 0 0XFFFFFFFF 0 0 0 1 "VIEWINT: Padlock next AA" OTWStepPrevPadlockAA -1 0 0XFFFFFFFF 0 0 0 1 "VIEWINT: Padlock prev AA" OTWStepNextPadlockAG -1 0 0XFFFFFFFF 0 0 0 1 "VIEWINT: Padlock next AG" OTWStepPrevPadlockAG -1 0 0XFFFFFFFF 0 0 0 1 "VIEWINT: Padlock prev AG" OTWSelectF3PadlockMode -1 0 0XFFFFFFFF 0 0 0 1 "VIEWINT: Padlock" OTWSelectF3PadlockModeAA -1 0 0XFFFFFFFF 0 0 0 1 "VIEWINT: Padlock Mode=AA" OTWSelectF3PadlockModeAG -1 0 0XFFFFFFFF 0 0 0 1 "VIEWINT: Padlock Mode=AG" OTWSelectEFOVPadlockMode -1 0 0XFFFFFFFF 0 0 0 1 "VIEWINT: Extended FOV" OTWSelectEFOVPadlockModeAA -1 0 0XFFFFFFFF 0 0 0 1 "VIEWINT: Padlock EFOV Mode=AA" OTWSelectEFOVPadlockModeAG -1 0 0XFFFFFFFF 0 0 0 1 "VIEWINT: Padlock EFOV Mode=AG"
-
If I wanted to convert this setup for use with plain x52, I would just need to create a .pr0 with mappings set like yours (empty except for a couple of keybinds) and modify the keyfile for the x52 dx numbers, correct?
-
If I wanted to convert this setup for use with plain x52, I would just need to create a .pr0 with mappings set like yours (empty except for a couple of keybinds) and modify the keyfile for the x52 dx numbers, correct?
Yes, 100% correct.
-
Yes, 100% correct.
Woo-hoo, I have this done and mostly working for non pro, except there’s one switch on the throttle that’s bound to awacs in your setup that I don’t seem to have a dx number for on my throttle.
I’m thinking I might have screwed it up in the pr0 file… That’s what I’ll check tomorrow… Err I mean later today after I’ve had some sleep.
It’s the first switch on the throttle base.
It was kind of a pain… Most (but not all) of the switch dx numbers were off by 32. If it were all of them it would have been really easy. But no. I reckon that’s why no one converted it already. =p
I’m kinda curious if all x52 are detected as controller 1? Or is mine detected that way because I have a Logitech G15 and an x-keys. I’d like to share the files, but I’m afraid it might not work for anyone else.
Edit: Yep. The x52 is detected as the 2nd controller because of my G13 (not G15), which apparently has one button on it’s joystick.
-
Ok, I found something wierd.
I was looking at “Flounder X52 Pro v5.pr0” in vim to see how you set it up (I can’t open X52 Pro files correctly in my version of SST).
Anyway, I found where you configured bands for the mouse x and y, and I found which keys those bands emulate when activated:[actioncommand=c1b5ba68-60e3-4cab-9a30-6648899b0b1b name=‘Radar Cursor Left’
[actionblock
[action device=keyboard [B]usage=0x00000043 page=0x00000007 value=0x00000001]]][actioncommand=116f9add-a3ae-42a5-bbd5-ba5305e5d1d3 name=‘Radar Cursor Right’
[actionblock
[action device=keyboard [B]usage=0x00000044 page=0x00000007 value=0x00000001]]][actioncommand=07e40c8a-33f2-4f7f-a34a-9f430451e706 name=‘Radar Cursor Up’
[actionblock
[action device=keyboard [B]usage=0x00000041 page=0x00000007 value=0x00000001]]][actioncommand=bf6163bd-6312-485f-b96f-97052c5c280b name=‘Radar Cursor Down’
[actionblock
[action device=keyboard [B]usage=0x00000042 page=0x00000007 value=0x00000001]]]The problem is that 0x41-0x44 correspond to F7-F10, not F8-F11. (F11 is 0x57)
Long story short, I think this SST file is mapping the wrong keys, and causes you to lose radar cursor right.
I guess my question is, am I missing something?
-
Woo-hoo, I have this done and mostly working for non pro, except there’s one switch on the throttle that’s bound to awacs in your setup that I don’t seem to have a dx number for on my throttle.
……
That may not be a recognized button in BMS (the layout around the MFD is different between the X52 and Pro). Easy way to see is to go to the BMS Setup UI and press the buttons on your MFD. The one’s that BMS ‘sees’ should show a text line with button number and text description, iirc. Some thing like, “Button 6 CMS Up”
Edit:
Not sure about the XML file, but this is what I see in the SST Programming:
It responds properly to radar slewing (which is mapped to F8, F9, F10 and F11 in BMS).
Just one more reason not to like SST, imho.
-
If it’s working, probably my guess that SST is using the same key codes is wrong.
It sure seemed like a good guess though, considering the other three key codes match exactly!Ah well, I figured out what I needed to. Sorry to be a pest.
When I’ve verified this working for 100% X52 non pro, would you like to post up the files?
I’d be happy to give them to you.
I’m sure there are other poor slobs like me with hoopty non pro sticks. -
…. When I’ve verified this working for 100% X52 non pro, would you like to post up the files?
I’d be happy to give them to you.
I’m sure there are other poor slobs like me with hoopty non pro sticks.If you’d like, I’d be happy to host the files for your X52 DX profile.