ANT ELEV knob pot??
-
Nice! Get the Warthog stick only, and a TUSBA R2 for your Cougar TQS. The Warthog stick is a VAST improvement over the Cougar - real MIL buttons in the grip. I have one, and am probably going to buy a second one.
-
Hey Guys, received this from Thrustmaster….
Regarding your Hotas Cougar. Here are the prices for the available parts mentioned by you in the list:
5074771 CTS HOLDER BLACK: 6 Euro
5074749 HOTAS PART32 CONNECTOR: 6 Euro
5074750 HOTAS COOLIE HAT F1616: 6 Euro
5074751 HOTAS COOLIE HAT F1618: 6 Euro
5074752 HOTAS COOLIE HAT F1619: 6 Euro
5074753 HOTAS COOLIE HAT F1620: 6 Euro
5074764 BUTTON 02 GREY 430C POLISHED: 6 Euro
5074765 BUTTON 04 BLACK POLISHED: 6 Euro
5074766 BUTTON 05 BLACK POLISHED: 6 Euro
5074767 BUTTON 06 GREY430C POLISHED: 6 Euro
5074772 CLIP BLACK: 6 Euro
5074773 BEARING BLACK F16-22: 6 Euro
6000715 HOTAS AXIS SPRING F16 31: 6 Euro
6000714 HOTAS TRIGGER SPRING F16 30: 6 Euro
6000432 CABLE HOTAS: 12 Euro
6000211 TACT SWITCH FOR STICK HOTAS: 12 Euro
5074747 HOTAS BRAKE BLACK HIGHEND TQS6: 6 Euro
5074748 HOTAS SLIDER BLACK TQS19: 6 Euro
5074754 HOTAS COOLIE HAT TQS16: 6 Euro
5074770 BUTTON 04 GREY 430C POLISHED: 6 Euro
5074774 BUTTON 03 GREY 430C TQS 17: 6 Euro
5074775 BUTTON 03 GREY 430C TQS 18: 6 Euro
5074776 BUTTON 03 GREY 430C TQS 30: 6 Euro
5074777 STOP BLACK TQS 7: 6 Euro
5074778 CORNER BLACK TQS 25: 6 Euro
6000194 POT 251B15F104B6NB THR.ARM HOTAS: 12 Euro
6000196 POT 270S1800 THROTT.FCT HOTAS: 12 Euro
6000200 SWITCH 3 WAY CK7103SYZBE00 HOTAS: 12 Euro
6000201 SWITCH 3 WAY CK7107SYZBE HOTAS: 12 Euro
6000198 POT DOUBLE 252A104B60NB: 12 EuroThe payment possibility is Paypal and there are 2 shipping options:
- standard shipping: 15 Euro
- express shipping: 40 Euro
You can purchase a maximum of 2 of each part.
-
Hi guys,
I’ll hijack this thread as my Ant pot broke down few days ago. TS support told me that they run out of stock of Ant pots. They also could not disclose any technical information about pot used. From what I’ve heard it should be 100 kOhm, 5 VDC, linear pot. Can anyone confirm this for sure?
I’ve searched for something with similar size, etc and found this: http://eu.mouser.com/Search/ProductDetail.aspx?qs=Ivs1Be2ZGq6BrJBXLYE2Gg== Do you think it could be considered as replacement, maybe with some modification to the shaft or with use of this 3d printed knob if original one would be incompatible?Thanks,
OG -
Also looking for the same Ant pot . Please let me know if you find anything. Thanks
Sent from my iPhone using Tapatalk
-
Hi guys,
I’ll hijack this thread as my Ant pot broke down few days ago. TS support told me that they run out of stock of Ant pots. They also could not disclose any technical information about pot used. From what I’ve heard it should be 100 kOhm, 5 VDC, linear pot. Can anyone confirm this for sure?
I’ve searched for something with similar size, etc and found this: http://eu.mouser.com/Search/ProductDetail.aspx?qs=Ivs1Be2ZGq6BrJBXLYE2Gg== Do you think it could be considered as replacement, maybe with some modification to the shaft or with use of this 3d printed knob if original one would be incompatible?Thanks,
OG…knowing that the part number is 270XM8508 and the OEM is CTS, it should be a small thing to dig up the manufacture’s spec sheet for this part without any help from TM.
However - I should think the Bourns pot you found would work just fine - the only issue being that the shaft may be too long or too short. Which you could easily fix. I’ve also been looking at the 3D printed parts you found - I think they would be an excellent upgrade and will probably grab some of those myself…I have a 3D printed replacement for the DMS switch that will work for either the Cougar or Warthog stick, with the correct F-16 cap -
-
Was easy to find on EBay. Bought a few for backup repairs, now that TM doesn’t supply them.
Any equivalents for the range potentiometer with push switch? (CTS 270S1800)
TM needs to get off their butts and make a new full hall sensored USB TQS.
-
Could you please share the link? Not so easy to find…
-
Could you please share the link? Not so easy to find…
Hi mrwell
Just stumbled over this thread… Don’t know if you’ve found it, but I guess this is the link:Best Regards
ZoomOut;) -
Thank you very much. I couldn’t find it
-
But it’s 10 kOhms, shouldn’t it be 100? The Bourns one I posted earlier (http://pl.mouser.com/Search/ProductDetail.aspx?qs=Ivs1Be2ZGq6BrJBXLYE2Gg%3d%3d) works very well. I needed to file it’s pcb a bit (it was too big) but after that it works great. And has very nice, very hard center detent.
-
But it’s 10 kOhms, shouldn’t it be 100? The Bourns one I posted earlier (http://pl.mouser.com/Search/ProductDetail.aspx?qs=Ivs1Be2ZGq6BrJBXLYE2Gg%3d%3d) works very well. I needed to file it’s pcb a bit (it was too big) but after that it works great. And has very nice, very hard center detent.
Guess you’re right og_wolf. My bad:roll:
-
Does anyone have a readme for removing the ANT pot?
Edit: nevermind, sorted it Cheers
-
Now that we have a viable source for the Antenna pot, real challenge is finding a replacement Range pot/switch started combo. Rarer then hens teeth?
-
From the email I received from Thrustmaster a few months ago, the Range Pot was still available.
#6000196 POT 270S1800 THROTT.FCT HOTAS: 12 Euro
Double Potentiometer and Range Axis
Here is a link to my previous post:
-
-
Stevie,
Compatible with the Cougar I assume… great price.
-
Same part as Thrustmaster sells, so yes - direct replacement. Hardest thing to come up with was the part number for the pot - all I did was Google the part number posted here, and this was the first hit.
-
Hm… it looks very similar. But I’m not sure if it’s the same. Thrustmaster part number mentions 270S1800 and this is 270X232A103B1B1. It means nothing but what bothers me is 10k Ohm vs 100k Ohm. This is 10k and from what I know Cougar TQS uses 100k parts. Do we have any electronics engineers here who can tell us if this difference matters or could be eliminated by adding some resistors (or sth) to the circuit?
I should have some spare RNG pots in home and if i recall correctly I received two different ones from TS some time ago. I’ll try to find some manufacturer/part number markings on them later.
-
The 104B1B1 is 100k
-
Hmmm also there where at least 2 different pcb’s of the throttle. Could this be also a considerable factor?
Sent from TapaTalk