Sustained G Breathing Mod
-
Well considering he’s a real world USAF Viper pilot I would venture to guess that he is referring to himself and the other pilots in his squadron. Plus probably every other Viper pilot because I bet little habits like those are picked up during the B Course.
Quick. Time for “The Save” –>
“he meant in real life…”
Er… um…
considering he’s a real world USAF Viper pilot I would venture to guess that he is referring to himself and the other pilots in his squadron. Plus probably every other Viper pilot because I bet little habits like those are picked up during the B Course.
When a “good save” goes horribly wrong.
-
The intercom in BMS must be different because it should not affect the BB tones. RWR has its own volume that you only want to crank up when you FENCE IN and turn down when you FENCE OUT. MSL TONE is separate as well. I find it to be comfortable at a 9 o’clock setting with RWR set to about the 3 o’clock setting
The intercom volume is only for you and your back seater, the crew chief when they’re plugged in, and the boom operator when tanking. You have to stay in HOT MIC so your breathing is recorded on tapes but I don’t want to hear myself breathe in the jet. It drains your SA when trying to listen to picture calls, low downs, etc.
If you leave it in HOT MIC and volume low you will get get your tapes to record your breathing but you won’t hear it.
-
yep we know that. But in BMS it is VERY different
Since there is no backseater or crew chief to talk to, it has different purposes -
@Red:
yep we know that. But in BMS it is VERY different
Since there is no backseater or crew chief to talk to, it has different purposesSo if sticking with realism it shouldn’t do anything…
-
To extend it in my way…
If we got stick to that much realism we shouldn’t have sims.Sent from TapaTalk
-
So if sticking with realism it shouldn’t do anything…
Thank you Fox3TwoShip. And what about warning/caution tones and betty messages? Is there any way to set their volume?
-
Thank you Fox3TwoShip. And what about warning/caution tones and betty messages? Is there any way to set their volume?
Nope, they are fixed, per the 1F-16CM-1:
@1F-16CM-1:
Monitoring of fixed volume warning tones (LG and low speed warning tone, TWS missile launch tone, and IFF mode 4 audio monitor) and voice messages.
There is a switch aft of the stick that allows you to INHIBIT these tones; however, it’s always safety-wired in VOICE MESSAGE.
-
Ok thank you! I always miss-read it then because I’ve never understood it like this.
-
Ok thank you! I always miss-read it then because I’ve never understood it like this.
Congrats on your 10,000th post BTW. But nope, they’re so important that I don’t want to have the option to turn them down. Maybe years ago in the M3 it functioned like that but I can’t say (I doubt it). But I know for a fact in M6.2 this is how it works.
-
… because of this:
"INTERCOM Knob
The INTERCOM knob has a cw arrow pointing to INC. Rotating the knob increases the volume of the signals available to the intercom set.
The intercom provides the following functions:
- Monitoring and volume control of voice communication between pilot and ground crew or between pilot and tanker boom operator, monitoring and volume control of AIM9 missile tone, TWS composite audio tone, and TWS missile launch tone.
- Monitoring of systems individually volume controlled from the audio control panels.
- Monitoring of fixed volume warning tones (LG and low speed warning tone, TWS missile launch tone, and IFF mode 4 audio monitor) and voice messages."
… I’ve probably never paid attention to “Monitoring of fixed volume warning tones”
Thank you again Fox3TwoShip!
Edit: thank you for the 10000 post lol …
-
… because of this:
"INTERCOM Knob
The INTERCOM knob has a cw arrow pointing to INC. Rotating the knob increases the volume of the signals available to the intercom set.
The intercom provides the following functions:
- Monitoring and volume control of voice communication between pilot and ground crew or between pilot and tanker boom operator, monitoring and volume control of AIM9 missile tone, TWS composite audio tone, and TWS missile launch tone.
- Monitoring of systems individually volume controlled from the audio control panels.
- Monitoring of fixed volume warning tones (LG and low speed warning tone, TWS missile launch tone, and IFF mode 4 audio monitor) and voice messages."
… I’ve probably never paid attention to “Monitoring of fixed volume warning tones”
Thank you again Fox3TwoShip!
Edit: thank you for the 10000 post lol …
Yah the -1 is a bit confusing and the 1-F16CM-34-1-1 doesn’t even talk about from what I could CTRL+F. But the way it’s written in the -1 it’s referring to the intercom as a whole system. If you look at the other bullets you’ll notice it makes mention of ‘volume control’. These are the components of the intercom system that are variable.
-
Yah the -1 is a bit confusing and the 1-F16CM-34-1-1 doesn’t even talk about from what I could CTRL+F. But the way it’s written in the -1 it’s referring to the intercom as a whole system. If you look at the other bullets you’ll notice it makes mention of ‘volume control’. These are the components of the intercom system that are variable.
Back on this topic Fox3TwoShip …
So, what you be (according to your knowledge) the correct implementation in game?
Currently (in game and according to the real -1) , the INTERCOM is a sort for master volume for all headset device (reducing the INTERCOM will reduce the MSL, THREAT, BETTY, TONES, RADIOS … and of course breathing returns as well)
If I understand correctly, you are suggesting that the INTERCOM knob should ONLY act on the breathing mask volume, and all other knob (MSL, THEAT, RADIO) are independent and BETTY should be fixed volume (no way to change the volume) ?
Could you confirm ?
-
As long as we can set it from 2D.
-
Looking forward to trying these out…. I think they sound great!
-
Back on this topic Fox3TwoShip …
So, what you be (according to your knowledge) the correct implementation in game?
Currently (in game and according to the real -1) , the INTERCOM is a sort for master volume for all headset device (reducing the INTERCOM will reduce the MSL, THREAT, BETTY, TONES, RADIOS … and of course breathing returns as well)
If I understand correctly, you are suggesting that the INTERCOM knob should ONLY act on the breathing mask volume, and all other knob (MSL, THEAT, RADIO) are independent and BETTY should be fixed volume (no way to change the volume) ?
Could you confirm ?
Correct. That’s exactly how it works. In terms of Betty being fixed, I couldn’t tell you how many decibels it is, but it will get your attention. When I last flew BMS (awhile ago), this is not how it worked.
-
Correct. That’s exactly how it works. In terms of Betty being fixed, I couldn’t tell you how many decibels it is, but it will get your attention. When I last flew BMS (awhile ago), this is not how it worked.
Thank you!
Not sure we will change the current behavior, at least maybe not yet … but now we know …