Development of new airbases - how to correct ATC instructions?
-
I understood why u thanked me BlackWolf just cleared out it’s not mine.
hmmm Lightning rings a bell… he is the guy that made the Lightnings MFD program?
He has 2 versions in that repository… maybe the one I uploaded is the old one?
-
Yep. There seems to be a more up to date version in there.
Haven’t tried it, though.
I think he has an MFD app there too so I guess you are right about him.
-
Thanks Arty,
We had been using TLKUTIL from 2001 in Guam, this should make it easier for the Speex conversion……once I figure out how the damn thing works…LOL!!!
demer
(BTW…Lightning has been in the Falcon World for years and has contributed much) -
Hi,
I would like to adapt the atc-voice for the ostsee-theater.
Unfortunately I have promised tomcatz to do it :(.
The tlktool does….nothing.
Is there a guide for this?Regards
MadDoc
-
And sorry to let all of you know that all the ‘informa’ links seem to be dead actually… what a pity.
With best regards,
-
-
Hi,
I would like to adapt the atc-voice for the ostsee-theater.
Unfortunately I have promised tomcatz to do it :(.
The tlktool does….nothing.
Is there a guide for this?Regards
MadDoc
The guide is in the previous page. just the readme.
-
This is the guide? I got it as information about the functions of tlktool. When I start the tool,
for a short moment a cmd window appears and that’s it. Nothing else happens. I’m confused…Regards
MadDoc
-
Start it in a command line and you’ll get the full help.
-
This is for the stations files
Use 32766 for every AB you create and you’ll get no radio names spoken.
well u open a dos window. u go to the directory where the tlktool is and u execute the exe
if u want to see it’s commands run it like that
tlktool.exe /? -
Sometimes…the answer is soooo easy.
It worksThank you very much :bdance:
Best regards
MadDoc
-
Yeap great tool but no UI. That’s why I started a new thread asking if a coder is willing to enhance it and make it user friendly.
Glad it worked for u. -
Now I have another question:
It seems like there are two ATC voices (female & male). These must now be assigned to the new airfields.
TomCatz told me that this information is in the station+ils.dat. Unfortunately I can
not recognize an assignment. Can someone help me there? Perhaps with an example …Regards
MadDoc
-
Hey Arty,
where do I find the informations about the “callsigns” in the stations+ils.dat?
This is for the stations files
Use 32766 for every AB you create and you’ll get no radio names spoken.From where do you have this number (32766)?
And: do you know, what then “campaign ID” in this file means?
And: do you know, why there are two files in Balkans, Ostsee but not in Korea? (stations+ils.dat and stations.dat)I appreciate any help I can get. Thanks
Regards
MadDoc
-
Is here someone who can help us?
We want to make the Ostsee-Theater nearly perfect.
This includes, of course, a correct ATC radio and correct runway-headings …Best regards
MadDoc
-
Is here someone who can help us?
C9
-
And: do you know, what then “campaign ID” in this file means?
CampId is a number that designates each objective. Each Airbase has an unique Camp ID. This is assaigned in the Te_new.tac file (or save#.cam if is a campaign).
To check it our you can use a few tools: Terrain Editor, Mission Comander or TacEdit (maybe more).
To assign an ATC frequency to each airbase you would have to edit the stations+ils.dat file.
I recommend you do it using Terrain Editor. It has on its menu: tools>Stations and ILs and from there open the stations+ils.dat fiel, but before using this tool is advisable to also open the te_new.tac in the ObjectiveLab also within Terrain Editor. This way you will see the names of the airbases when accesing the Sations and Ils tool.There you see or can add the CamID lines with the frequencies and channels you want to assing for each airbase. This way you enable ATC, ILS, TACAN etc.
Now. To tell the ATC the number of runway they can assign takeoffs or landings you need to edit in Falcon Editor the Airbase Objective. There double click on each of the RunwayListTypes and under the Runway Texture value you should assign the correct one according to the table I posted in post #6 in this topic. This tells the ATC the availabe runways and their runway number (36 right i.e.)
An example in KoreaKTO:
Kunsan airbase has CampID: 766 and Tower UHF 292.300. It only has a runway (has some sort of an emergency run way used mainly for taxi) So it has Two RunwayListTypes, one for taking off or landing from each header of the runway.
In falcon editor (CT 3095) Kunsan has for the first RunwayListType the value 17 for “Runway Texture”, which, according to my table is for atc saying “RUNWAY 1-8” (correct since the real course is 176) wiht no Right or Left assigned. (Single runway airbase), and for the second RunwayListType a “Runway Texture” value of 37 which corresponds to ATC saying “RUNWAY 3-6” according to my table again.
Use this example and my table as reference to assing the correct courses. (Hint: Look at RunwayListTypes as if you where going to takeoff following the route they describe)
About making the ATC say no name for the airbase…. I don’t know how to do that. Sorry.
-
https://www.benchmarksims.org/forum/showthread.php?29793-Norway-Theater-Lets-Do-It!-Sounds
I believe it will help.
Στάλθηκε από το MI 5 μου χρησιμοποιώντας Tapatalk
-
Hello,
To replace the atc-voices in the Ostsee-Theatre I will use a text-to-speech-software. I use the iOS app “VoiceReader”.
Unfortunately, the Ostsee-Theatre also contains German words, which should be pronounced as German as possible:- Laage
- Wittmund
- Jagel
- Hohn
- Neubrandenburg
- Nordholz
Maybe someone has an idea how I can write the words so that an Englishman pronounces them correctly (see note for J-F-K)
Regards
MadDoc
-
Ok, for other people that might follow our footsteps afterwards:
The value to change is, for each runway, in the second RunwayListType, change the “Texture Value” (double click) according to this TextureID table we have developed reading the evalFile.bin:Hi Blackwolf,
didnt catch the Link between your Texture ID table and the evalfile.bin
I tried to do the Changes for Pescara´s RWY´s 22/04For the “22” i used ,according to your table , TexID 47. Because there is no “22” frag availabe,i used the “22R” , it works fine. ATC calls now " Runway 22 right"
For RWY 04 ,it should be TexID 57 / frag Nr. 1187.
In Game ATC calls only “four” (which is the content of Frag 1187) ,that´s not call which was expected. (should be “Runway 04”)
Of course there is no Frag that calls “Runway 04” this one must be created first.But how to change the link between Text ID and the used Fragfile ?
Hope you can follow my explanations.