YAME64 suite
-
I rotate mine in the nVidia control panel.
-
Hi Faan, thanks for the explanation (and fast reply) . I will try the Windows option thx!
Snowman
No problem.
This is how I did it on my Windows pc a while back. (not my screenshot, but thatās how it looked in Win7) -
Hi snowman,
In v1.1 (and v1.2rc) we only have rotation available for master Caution and eyebrows IIRC.
Are you sure you canāt turn your screens in Windows setup? I remember doing that with a monitor at work to have it vertical.Greetz
FaanWhat is v1.2rc? Was I asleep at the wheel when the latest version released?
-
What is v1.2rc? Was I asleep at the wheel when the latest version released?
RC stands for release candidate. Itās an internal version, more finished then beta status, but not finished to be released yet (1 nasty bug for server + multiple clients).
-
No problem.
This is how I did it on my Windows pc a while back. (not my screenshot, but thatās how it looked in Win7)that did the trick.
very simple. did not think of it thx!snowman
-
@usafpga:
My YAME CRASHES almost every time I use it for MP sessions, and when it does, my session is lost. It also happens alot of times when Iām in SP and I have to Alt - Tab out of BMS to restart it!! Iāve tried giving this program a chance, but it keeps letting me down. Does anyone have ANY solutions to this problem, or has anyone else experienced anything like this with this program? Itās a wonderful program, but it will not continue to run for me. Iām using the latest version by the way.
FRUSTRATED!!!
I had a lot of crashes too. I am using YAME over LAN on a server/client config.
My client was the one crashing, what would my extracted MFDs and gauges freeze. I had to restart the YAME client to get it to work again.
Yesterday after reading your post I tried to change some YAME settings to see if I could narrow the problem down.
Apparently the problem with my config was the anti-aliasing for the MFDs. I use three different client windows, one for the gauges, and one for each of the MFDs. I was antialiasing both MFDs windows.
Today I deactivated the anti-aliasing and I logged a couple of hours without YAME crashing.
I will try to be more specific once I can look into it a little bit deeper.
FYI my client PC is an i3 with a gtx580 (canāt remember the driver version)
I have to try with different settings with Nvidia inspector for the anti-aliasing.
All in all itās a long shot, but worth the try
-
Hi guys,
small question:
Is there a way to order the gauges? E.g. now ADI is on top but the bezel overlaps the other gauges (i have a bezel on my cockpit, so just need the internal instrumentation).
this i could solve in 2 ways: select no bezel (like HSI) or have the ability to control which gauge is on top of the other. Both i could not find as a possibility.
(if you have other ideaās let me know )thanks Snowman
-
Hi guys,
small question:
Is there a way to order the gauges? E.g. now ADI is on top but the bezel overlaps the other gauges (i have a bezel on my cockpit, so just need the internal instrumentation).
this i could solve in 2 ways: select no bezel (like HSI) or have the ability to control which gauge is on top of the other. Both i could not find as a possibility.
(if you have other ideaās let me know )thanks Snowman
Is there a way to order the gauges?
Yes, in 1.2-rc, you can use numpad +/- to move a gauge one position up/down the layers. Depending on where the other gauge is in the xml, you might need to hit that a couple of times. Or you can order them in the layout xml directly.
In 1.1 for now itās only possible via the layout xml directly.select no bezel (like HSI)
Not possible Iām afraid with most gauges that have moving parts in the background. You can delete the bezel from the appropriate texture image in the /gauges/ folder but then youāll notice that for example the flags and the ball texture are visible where the bezel used to be, so not useable if no real bezel is hiding that stuff. -
Thx!
You might want to consider adding move up and move down items to the right mousemenu?
Of course numpad will also work
-
Thx!
You might want to consider adding move up and move down items to the right mousemenu?
Of course numpad will also work
This is a good idea, thank you.
-
This is a good idea, thank you.
Agreed. Added to our internal issue tracker for the roadmap.
-
This is really cool! I have a touchscreen tablet that Iād like to put the MFDs onto. However while getting the MFD display itself set up was straightforward, I canāt seem to figure out how to put the actual buttons around it. Is it possible to get the MFDs to show and have working buttons?
-
This is really cool! I have a touchscreen tablet that Iād like to put the MFDs onto. However while getting the MFD display itself set up was straightforward, I canāt seem to figure out how to put the actual buttons around it. Is it possible to get the MFDs to show and have working buttons?
I donāt think that YAME allows you to do the buttons. Roccio correct me if Iām wrong.
Thatās why we use touchscreens to go with Helios.
PikaSent from my iPhone using Tapatalk Pro
-
This is really cool! I have a touchscreen tablet that Iād like to put the MFDs onto. However while getting the MFD display itself set up was straightforward, I canāt seem to figure out how to put the actual buttons around it. Is it possible to get the MFDs to show and have working buttons?
Not in current v1.1
In future v1.2 you will have touchable mfd (f16 & f18), Icp (regular & block60), center pedestal, master Caution, atd, twp, twa, machmeter index, altimeter pressure, adi horizon, hsi/ehsiā¦ -
Thanks for the wonderfull YAME-software!!!
As Iām using YAME 32bit on my client-pc as well,
Iām just wondering if this little error could have been fixed in the announced new version of YAME:Thank you very much for the 32b
A stupid questionā¦.How to Stop/Close 32b version?
seems to be an issue with the 32bit version. Placed in our tracker as critical bug.
Thanks in advance!
-
Thanks for the wonderfull YAME-software!!!
As Iām using YAME 32bit on my client-pc as well,
Iām just wondering if this little error could have been fixed in the announced new version of YAME:Thanks in advance!
I have no 32 bit PC, so I can hope that the next version will fix this issue.
-
Not in current v1.1
In future v1.2 you will have touchable mfd (f16 & f18), Icp (regular & block60), center pedestal, master Caution, atd, twp, twa, machmeter index, altimeter pressure, adi horizon, hsi/ehsiā¦I canāt wait, thats awesome
-
-
YAME works great! Thx for the development guys. A small feature request if I may?
Currently I need to actively startup YAME and start the extraction.
Is it possible to choose for the option to have YAME start on Windows startup including the extraction? That would mean I only have to start BMS
(I guess you can call it lazy ) not a high prioriteit request of course.Thanks again guys!
-
YAME works great! Thx for the development guys. A small feature request if I may?
Currently I need to actively startup YAME and start the extraction.
Is it possible to choose for the option to have YAME start on Windows startup including the extraction? That would mean I only have to start BMS
(I guess you can call it lazy ) not a high prioriteit request of course.Thanks again guys!
Hi mate,
Normally in Windows you can add items in the start list in the start menu IIRC?
V1.2 will have the ability to add command line options to autostart several stuff (-layout -client -server -falcon -batch -minimze). So in theory you can have a shortcut with the something like āyame64.exe -layout snowman.xml -batch -client -falcon -minimizeā and it woud start yame, load your layout, start the batch run of other programs you have selected to be in the batch in the first UI tab, start the client, start falcon and minis to system tray; all at once