BMS 4.34 Documents correction report
-
On the Carrier Case 1 recovery training mission, the Enterprise approach freq. is 265.100 as indicated in the mission doc., but when the mission begins, 269.5 is already tuned at the UHF radio, and curiously it works OK with a correct reply from approach control.- When I tuned the apropiate freq 265.100 I had no response, and worse, when I returned to 269.5 couldnt contact anymore with the carrier
-
How do you the frequency when you enter the mission?
The frequency is not readily visible in the pit when you enter the mission, and since training scripts indeed sets the frequency 265.1, and since I just tested I am happy to report that the TE sets 256.1 in Com1 and all works fine
Here’s the proof
Once int eh TE, hit DCS return, ICP COm 1 and the pit will show this:
The only reason why the frequency wouldn’t be right is that the training script didn’t run correctly
-
Training manual - page 11. First sentence duplicated. See pic.
Edit RD [Fixed]
-
@Red:
How do you the frequency when you enter the mission?
The frequency is not readily visible in the pit when you enter the mission, and since training scripts indeed sets the frequency 265.1, and since I just tested I am happy to report that the TE sets 256.1 in Com1 and all works fine
Here’s the proof
Once int eh TE, hit DCS return, ICP COm 1 and the pit will show this:
http://www.ravico.com/ST/BMS_434/picture/hornet_case1.pngThe only reason why the frequency wouldn’t be right is that the training script didn’t run correctly
OK, The confusion was that when the mission begins, for some reason, 265.1 is already tuned at the scratch pad, but the active freq is 256.1
-
Still don’t get it Soldano. 256.1 is not active. As showed in the picture, the correct and set frequency is 265.1. the simple fact that the carrier approach controller responds is ample proof
-
Dash -34
1.4.4.2.1 Enhanced Search Display (ESD) pg.57When a target is tail/low aspect (including near beam targets at 80” right/left) the indication will be pointing up from the search target.
Should it be 80° (as in the preceding sentence)?
-
Dash -34
1.4.4.2.1 Enhanced Search Display (ESD) pg.57Should it be 80° (as in the preceding sentence)?
Good spot. Thank you.
-
Page 154:
IFF mode 4 feedback is toggled by pressing ICP 7
Shouldn’t that be ICP 6?
ICP 7 is for IJAM (as described also on the bottom of page 157)
Cheers,
sambucca -
It refers to transponder page, not interrogator.
-
KTO AIP Page 50 - Seosan Ground Frequency is same as Tower, should be 275.8 instead of 353.1
Edit RD [Fixed] -
Thanks for all the hard work to get us BMS 4.34 and for keeping Falcon alive!
How do you guys plan to incorporate the errata identified in this thread? Red dog said the manuals won’t be updated for a while but if it’s only a few errors, why not upload a quick fix, more accurate/correct document?
-
Hello guys !
Thanks for the hard work, and long life to Falcon BMS !Slight mistake in BMS User Manual page 3-19 : there is no longer the option to choose between 32- and 64 bit version (at least on my system, Win10x64) and so the screen capture is outdated.
Edit RD [Fixed]Best regards,
Viking
-
Removed, posted in error
-
@jc1:
Training Manual, page 35 and Dash-1 page 68
Images of the DED Steerpoint show aircraft elevation. However, BMS 4.34 seems to have ground elevation just like the real jet. See me over Wolf in Training Mission #3, Basic Navigation, p35And the Dash-1 page 68 text
“The fourth line is the elevation of the steerpoint (the altitude at which you are supposed to overfly the steerpoint according to your INS flight plan). This is different from the real jet that has the ground spot height for steerpoint in this field (it is quite relevant to TGP mechanisation and finding the target”should now say something like BMS 4.34 is now like the real jet.
https://www.benchmarksims.org/forum/showthread.php?36038-Photos-attachment-issue&p=500343#post500343
Inactive attachment! =?
-
BMS-Comms-Nav-book page 17
“There are 4 main approaches available with BMS ATC:”
5 are listed.
Edit RD [Fixed]
-
BMS Training Manual
Pg 11On the EXT LIGHTS panel we set…
instead of EXT LIGHTNING;
THE ELEC SYS caution light…
Typo
Pg 21
The sky conditions scheme has the “AMB” fields actually white (on the COMMS & NAV Manual instead are amber).Pg.33
…at this speed you will need ~65 seconds to reach the steerpoint…
Picture reports ETE 000:58 (not sure if refers to the picture though)
Pg.36
With the AP in STRG SEL the aircraft will steer towards the HSI bearing pointer the.
Typo (or I didn’t catch the meaning)
Edit RD [Fixed]
-
Well spotted; keep 'em coming please :thumb:
-
A few edits for this departure procedure.
Edit RD [Fixed] & MSA is always the airport station in BMS
-
BMS-Comms-Nav-book page 42
Spotted by MadDoc in my voice attack profile thread, not yet listed here: element commands depicted do not match the in game menus.
-
It seems that this thread is starting to have items that are not really corrections. Could the moderators make a sub thread that shows only the confirmed corrections and lock out any changes to that sub thread?