YAME64 suite
-
Are you using the Direct3D Hook or RTT shared memory ?
If the latter, try setting everything up for the D3D Hook3D hook doesn’t work with 4.34 (yet)
-
-
Yep, just using RTT at the moment. I just don’t understand the increase in memory usage, especially when my friend only has a combined 900mb-1gb between YAME and BMS.
-
More testing carried out this morning - tried YAME as admin, YAME in Win8 compatibility mode, and reinstalling… all with no effect.
Memory usage at 2D with YAME client running is ~800MB BMS & ~90MB YAME, 55% overall utilisation. As soon as I enter the pit, BMS climbs to around ~1.5GB and YAME spikes as high as 3.3GB, ultimately settling at ~1.5GB. Overall utilisation is pegged at 98%. Returning to 2D returns BMS & YAME to their previous levels (ish) but usage remains pegged at 98% until I kill YAME entirely.
Any ideas at all?
-
Hi to everyone,
I have a strange problem with Yame. I try to use it on a network (which work perfectly with MFDExtractor) but when I try to configure YAME64, in the server tab the IP adresss is 0.0.0.0 and I don’t know how to change it to my real IP adress 192.168.1.110, any ideas??? -
Presumably you have selected “get data from network” under the <client>< extraction> tab? and then entered the server IP?</client>
-
The demise of YAME is exaggerated.
Hope to be able to report progress in 3-4 weeksCan’t wait, have been loving it since finding out about it on my two Lilliput 8" touchscreens! I now have the right one in portrait mode with your fictional Blk 60 center pedestal with moving map, great stuff! Let me know if you need beta testers!
-
-
Any news, I realize it is summer holidays
-
I hope there will be some good news soon….! :bowd:
-
YAME64 LAYOUT XML FILE ISSUE:
When I launch YAME64 and start YAME client to load any YAME layout xml file, and then afterwards stop the YAME client, I have noticed that the “Date Modified” timestamp for that YAME layout xml file located in the YAME\layouts folder has automatically been updated with a new/current “Date Modified” timestamp.
Is this timestamp update supposed to occur each time when starting/stopping YAME client?
I don’t recall this happening before, and not sure if this is related to YAME64 suite v1.2.1 or Windows 10 Home Edition version 1909 OS build 18363.1082 which I am using. This has caused a bit of confusion with maintaining backup copy of xml layout files.
I have used WinMerge program to compare copy of original/updated layout xml files, but there are no actual xml edits being made except for the updated timestamp.
Any clarification would be appreciated.
Cheers -
YAME64 LAYOUT XML FILE ISSUE:
When I launch YAME64 and start YAME client to load any YAME layout xml file, and then afterwards stop the YAME client, I have noticed that the “Date Modified” timestamp for that YAME layout xml file located in the YAME\layouts folder has automatically been updated with a new/current “Date Modified” timestamp.
Is this timestamp update supposed to occur each time when starting/stopping YAME client?
Just checked all my YAME64 1.2.1 .xml files in the “Layouts” folder and none are dated currently, the newest one is several months old, I believe when I made some edits to it… Win10 Pro ver. 19041.508, used Yame yesterday.
-
I did a clean reinstall of YAME v121 and Microsoft Visual C++ redistributable 2015 but that didnt fix my issue,
in mean time I have a workaround by modifying the xml layout file properties to enable read-only attribute which will prevent any unintended update. -
Hi to everyone,
I have a strange problem with Yame. I try to use it on a network (which work perfectly with MFDExtractor) but when I try to configure YAME64, in the server tab the IP adresss is 0.0.0.0 and I don’t know how to change it to my real IP adress 192.168.1.110, any ideas???Hello everyone,
I recently upgraded my pit with 4 new displays. I used YAME client as I was running 3 displays on a singel PC. But with the 4 new upgrades I need to go via Network.
If I undertand correctly its possilbe to run the server and the (first) client (for the 3 displays) on the main PC (where BMS is installed with option “Also run server”) and a second client on a second PC.
But I have the same problem with the 0.0.0.0 IP adress.
Is there a work around for this problem?
Thanks in advance for any ideas and help.
Greetz Tweety -
Do you have this problem on the server side or on the client?
On the server: YAME64 automatically puts your IP into the field in the “Server” tab. You can’t change this one.
On the client YAME does not even show a server tab. There is just the tab “Client” and if you choose “Get data from network” then you should be able to enter the servers IP into the “Server IP” field.
At least that is how it works on my side.
I use YAME64 on the BMS host and YAME32 on a linux networked subnotebooks, but that should not really be relevant.
-
Do you have this problem on the server side or on the client?
On the server: YAME64 automatically puts your IP into the field in the “Server” tab. You can’t change this one.
On the client YAME does not even show a server tab. There is just the tab “Client” and if you choose “Get data from network” then you should be able to enter the servers IP into the “Server IP” field.
At least that is how it works on my side.
I use YAME64 on the BMS host and YAME32 on a linux networked subnotebooks, but that should not really be relevant.
Hello Kisakuru,
It’s on the Server side. It shows only 0.0.0.0 and I can’t change that manually. My BMS PC has a specific IP adress but it wont show.
Client side on my network PC is fine. There I can set the IP adress correctly after chossing “Get data from Network”.
Do you know where YAME is looking for the IP adress?
Thanks in advance,
Tweety -
Hi i have some problem with g_bExportRTTTextures to 1 even though i set it to 1 but the client say that i setted it to 0
-
Hi i have some problem with g_bExportRTTTextures to1 even though i set it to 1 but the client say that i setted it to 0
You need to have it set in both 4.33 and 4.34 installation. At least that was the requirement I had when I tested YAME with 4.34
Gesendet von meinem SM-G930F mit Tapatalk
-
Where do I register a YAME64 bug?
It appears that on the Center Pedestal Block 60 panel the following buttons have problems:
CP60_OSB20 “Mode”
This button does not respond to keyboard callbacks.
Also with “Use Touch Screen” enabled the button only responds to every second tap on the touchscreen.
CP60_OSB24 “Left/Right MFD”
This button does not respond to keyboard callbacks.
I’ve checked these several times and both are totally repeatable.
-
Yep i did have it installed already!