BMS Other Fighters Mafia (BMSOFM) Journal
-
There’s a question out on General Discussion about refueling other jets. Have you guys any experience on aerial refueling of the Hornet, how that works ?
Cheers
jaybit works very well for me
-
ok thanks, only video I ever saw of that was from 4.33. Has it ever come up to add buddy and/or drogue refueling, and is it your impression that the devs could be up for it?
-
-
probably not
OK, thanks for the message, I respect that of course and the immense effort you all are putting into this sim.
If it ever comes up in the future, do consider how buddy refueling could give some interesting tactical advantages. For instance, this video shows how buddy refueling keeps planes airborne when trying to land in very difficult conditions:
.Some are about to run out of fuel in the pattern overhead the carrier and they scramble refueling jets to keep that from happening.
Also, with larger theatres coming out (128 segments) having additional refueling options becomes ever more important.
-jb
-
OK, thanks for the message, I respect that of course and the immense effort you all are putting into this sim.
If it ever comes up in the future, do consider how buddy refueling could give some interesting tactical advantages. For instance, this video shows how buddy refueling keeps planes airborne when trying to land in very difficult conditions:
.Some are about to run out of fuel in the pattern overhead the carrier and they scramble refueling jets to keep that from happening.
Also, with larger theatres coming out (128 segments) having additional refueling options becomes ever more important.
-jb
Hi, Jayb,
In answer to your first question, procedure is the same in the Bug/ Rhino, as Lorik said. The flight modeling is a bit different in the -18’s, but it’s subtle.
Buddy stores have been discussed in the past. It turns out to be a rather involved process to set it up. Hate to tell you, but I wouldn’t be holding by breath -
Hi, Jayb,
In answer to your first question, procedure is the same in the Bug/ Rhino, as Lorik said. The flight modeling is a bit different in the -18’s, but it’s subtle.
Buddy stores have been discussed in the past. It turns out to be a rather involved process to set it up. Hate to tell you, but I wouldn’t be holding by breathI can imagine that it would be quite complicated to build and I was not expecting any current plans. One can dream though
-
Good Day, All
In further Rhino testing I found the TGP wasn’t working in the Rhino. The fix is now in the Mafia Files as f18e Ver.7.8.21 -
-
Good Day, All
In further Rhino testing I found the TGP wasn’t working in the Rhino. The fix is now in the Mafia Files as f18e Ver.7.8.21still waiting for a better f-18e AFM
thanks for your hard work -
still waiting for a better f-18e AFM
thanks for your hard workIt may be awhile, meanwhile, yw
-
F-18E Rhino Take off trim and auto flaps were fixed or added???
-
F-18E Rhino Take off trim and auto flaps were fixed or added???
Hi, Seb, Yes, in both the “1958” and “4.35 acdatas” in the Files.
All,
While on the subject of the Rhino, the acdatas and ckPtArt folders can be used in the F18-F and the Growler. Just be careful to get the correct cockpitwingmodel in 3dckpt.dat. The E is 1470,F is 1474, and G is 1479. And, of course, you have to rename the acdatas to “f18f” and “ea18g” , respectively.
The explanation of all this is in the Fighters Manual in the Mafia Files -
Hi, Seb, Yes, in both the “1958” and “4.35 acdatas” in the Files.
All,
While on the subject of the Rhino, the acdatas and ckPtArt folders can be used in the F18-F and the Growler. Just be careful to get the correct cockpitwingmodel in 3dckpt.dat. The E is 1470,F is 1474, and G is 1479. And, of course, you have to rename the acdatas to “f18f” and “ea18g” , respectively.
The explanation of all this is in the Fighters Manual in the Mafia Filesthanks, i’ll try it
-
Good Day, All
Here’s a quick Rhino Update for today…
I’m noticing almost constant BIT TEST FAILS in the Rhino, that don’t want to reset/correct. So, for now just reset the FLCS and clear the TEST page, but do not run the actual BIT TEST.
We’re working on it, and I’ll keep you informed.
Also, I posted this elsewhere, but here is a reference I like for the Case 1 approach -
Good Day, All
Here’s a quick Rhino Update for today…
I’m noticing almost constant BIT TEST FAILS in the Rhino, that don’t want to reset/correct. So, for now just reset the FLCS and clear the TEST page, but do not run the actual BIT TEST.
We’re working on it, and I’ll keep you informed.
Also, I posted this elsewhere, but here is a reference I like for the Case 1 approachtake off trim not working like bug, and auto flaps also not working
-
take off trim not working like bug, and auto flaps also not working
Seb, The acdatas have been changing 'fast and furious" lately, didn’t have time to update the Files. Until now. The current f18e.dat and f18e_afm in both “1958” and “4.35 acdatas” are right out of my install, and everything is working. Tested multiple times.
All,
It looks like a fix to the FLCS BIT FAIL mentioned in the previous entry, has been found. Remove “FlcsBitRpmVar 0.00” from the f18e.dat. I have not changed the Mafia Files, yet, as I have only tested it once in one theater. -
Seb, The acdatas have been changing 'fast and furious" lately, didn’t have time to update the Files. Until now. The current f18e.dat and f18e_afm in both “1958” and “4.35 acdatas” are right out of my install, and everything is working. Tested multiple times.
All,
It looks like a fix to the FLCS BIT FAIL mentioned in the previous entry, has been found. Remove “FlcsBitRpmVar 0.00” from the f18e.dat. I have not changed the Mafia Files, yet, as I have only tested it once in one theater.thanks for your reply, i’ll try it again
-
Seb, The acdatas have been changing 'fast and furious" lately, didn’t have time to update the Files. Until now. The current f18e.dat and f18e_afm in both “1958” and “4.35 acdatas” are right out of my install, and everything is working. Tested multiple times.
All,
It looks like a fix to the FLCS BIT FAIL mentioned in the previous entry, has been found. Remove “FlcsBitRpmVar 0.00” from the f18e.dat. I have not changed the Mafia Files, yet, as I have only tested it once in one theater.what is the difference between 1958 and 4.34 acdatas folders?
-
Seb, The acdatas have been changing 'fast and furious" lately, didn’t have time to update the Files. Until now. The current f18e.dat and f18e_afm in both “1958” and “4.35 acdatas” are right out of my install, and everything is working. Tested multiple times.
All,
It looks like a fix to the FLCS BIT FAIL mentioned in the previous entry, has been found. Remove “FlcsBitRpmVar 0.00” from the f18e.dat. I have not changed the Mafia Files, yet, as I have only tested it once in one theater.i tested the files you had uploaded, TOT working fine, auto flaps working all fine, but there is a bug with AFM, the plane just reaches 5.5 G and below 230 knots in a dogfight it begins to spin like a twister.
anyway thanks for the MAFIA work!
did you talk to Mav-Jp? he is a expert in AFM matter -
i tested the files you had uploaded, TOT working fine, auto flaps working all fine, but there is a bug with AFM, the plane just reaches 5.5 G and below 230 knots in a dogfight it begins to spin like a twister.
anyway thanks for the MAFIA work!
did you talk to Mav-Jp? he is a expert in AFM matterI’ve noticed a spin or 2 , myself. In fact, had a really “entertaining” one a couple of missions ago.
I have reached out to Mav-Jp, awaiting reply