4.37 Update 1 "messed up"/broke Rampage missile and "autojammer"
-
@janjan tested what? Tumbler or my solution?
-
@Seifer Setting TimeToActive to -1
-
@janjan try my solution then. It has other side effects but will help pinpoint the cause.
-
@Seifer said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
@janjan try my solution then. It has other side effects but will help pinpoint the cause.
i doubt it will change anything
-1 as TimeTOGoactive is a garantee that the missile does not fly the AHR anyway
This has been fixed for U2 already FYI
-
@Mav-jp Is the U2 already?
-
@janjan said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
@Mav-jp Is the U2 already?
nope it’s cooking
-
@Seifer said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
One thing you can test, open your
Falcon BMS.cfg
and look for a pririoty fix line. Change:set g_sPriorityFixes "all"
to:
set g_sPriorityFixes "all-AHR_GUIDANCE"
Does it change the rampage behavior?
Many thanks Seifer. Your recommendation helped me a lot. Now rampage flies straight to the target.
-
@demvol599 said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
@Seifer said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
One thing you can test, open your
Falcon BMS.cfg
and look for a pririoty fix line. Change:set g_sPriorityFixes "all"
to:
set g_sPriorityFixes "all-AHR_GUIDANCE"
Does it change the rampage behavior?
Many thanks Seifer. Your recommendation helped me a lot. Now rampage flies straight to the target.
if you use
set g_sPriorityFixes "all"
and change the .dat file as described below, does it also work ok for you?C:\Falcon BMS 4.37\Data\Add-On Israel\Sim\Misdata\rampage.dat
setTime To Go Active
to -1.00.# Time To Go Active (sec) -1.00
-
@Tumbler31 said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
@demvol599 said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
@Seifer said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
One thing you can test, open your
Falcon BMS.cfg
and look for a pririoty fix line. Change:set g_sPriorityFixes "all"
to:
set g_sPriorityFixes "all-AHR_GUIDANCE"
Does it change the rampage behavior?
Many thanks Seifer. Your recommendation helped me a lot. Now rampage flies straight to the target.
if you use
set g_sPriorityFixes "all"
and change the .dat file as described below, does it also work ok for you?C:\Falcon BMS 4.37\Data\Add-On Israel\Sim\Misdata\rampage.dat
setTime To Go Active
to -1.00.# Time To Go Active (sec) -1.00
I only made the change in the “Falcon BMS.cfg” file, as Seifer pointed out - set g_sPriorityFixes “all”
to:
set g_sPriorityFixes “all-AHR_GUIDANCE” -
@demvol599 said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
@Tumbler31 said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
@demvol599 said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
@Seifer said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
One thing you can test, open your
Falcon BMS.cfg
and look for a pririoty fix line. Change:set g_sPriorityFixes "all"
to:
set g_sPriorityFixes "all-AHR_GUIDANCE"
Does it change the rampage behavior?
Many thanks Seifer. Your recommendation helped me a lot. Now rampage flies straight to the target.
if you use
set g_sPriorityFixes "all"
and change the .dat file as described below, does it also work ok for you?C:\Falcon BMS 4.37\Data\Add-On Israel\Sim\Misdata\rampage.dat
setTime To Go Active
to -1.00.# Time To Go Active (sec) -1.00
I only made the change in the “Falcon BMS.cfg” file, as Seifer pointed out - set g_sPriorityFixes “all”
to:
set g_sPriorityFixes “all-AHR_GUIDANCE”I know, but it would be interesting to know if it is also fixed using the change in the .dat file without seifer’s fix
-
@demvol599 said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
Many thanks Seifer. Your recommendation helped me a lot. Now rampage flies straight to the target.
Which works, but is wrong. Rampage is not a supermaverick IRL.
-
@Tumbler31 said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
@demvol599 said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
@Tumbler31 said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
@demvol599 said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
@Seifer said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
One thing you can test, open your
Falcon BMS.cfg
and look for a pririoty fix line. Change:set g_sPriorityFixes "all"
to:
set g_sPriorityFixes "all-AHR_GUIDANCE"
Does it change the rampage behavior?
Many thanks Seifer. Your recommendation helped me a lot. Now rampage flies straight to the target.
if you use
set g_sPriorityFixes "all"
and change the .dat file as described below, does it also work ok for you?C:\Falcon BMS 4.37\Data\Add-On Israel\Sim\Misdata\rampage.dat
setTime To Go Active
to -1.00.# Time To Go Active (sec) -1.00
I only made the change in the “Falcon BMS.cfg” file, as Seifer pointed out - set g_sPriorityFixes “all”
to:
set g_sPriorityFixes “all-AHR_GUIDANCE”I know, but it would be interesting to know if it is also fixed using the change in the .dat file without seifer’s fix
Bah we know it’s fixed in U2 anyway , since AHR code will not be run on rampage
Do you think rampage had to use AHR anyway ??? (In old code ?)
-
@Tumbler31 said in 4.37 Update 1 "messed up"/broke Rampage missile and "autojammer":
@demvol599 said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
@Tumbler31 said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
@demvol599 said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
@Seifer said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
One thing you can test, open your
Falcon BMS.cfg
and look for a pririoty fix line. Change:set g_sPriorityFixes "all"
to:
set g_sPriorityFixes "all-AHR_GUIDANCE"
Does it change the rampage behavior?
Many thanks Seifer. Your recommendation helped me a lot. Now rampage flies straight to the target.
if you use
set g_sPriorityFixes "all"
and change the .dat file as described below, does it also work ok for you?C:\Falcon BMS 4.37\Data\Add-On Israel\Sim\Misdata\rampage.dat
setTime To Go Active
to -1.00.# Time To Go Active (sec) -1.00
I only made the change in the “Falcon BMS.cfg” file, as Seifer pointed out - set g_sPriorityFixes “all”
to:
set g_sPriorityFixes “all-AHR_GUIDANCE”I know, but it would be interesting to know if it is also fixed using the change in the .dat file without seifer’s fix
Did a test of your .dat file without seifer’s fix. Everything is fine. All rampage missiles hit their intended targets.
-
@Dee-Jay said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
@demvol599 said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
Many thanks Seifer. Your recommendation helped me a lot. Now rampage flies straight to the target.
Which works, but is wrong. Rampage is not a supermaverick IRL.
I understand. But now I want to indulge in these rampages in the Israeli theater (without waiting for U2)
-
@demvol599 said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
@Dee-Jay said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
@demvol599 said in 4.37 Update 1 “messed up”/broke Rampage missile and “autojammer”:
Many thanks Seifer. Your recommendation helped me a lot. Now rampage flies straight to the target.
Which works, but is wrong. Rampage is not a supermaverick IRL.
I understand. But now I want to indulge in these rampages in the Israeli theater (without waiting for U2)
And this is the only munition you can use in ITO ?
-
@Dee-Jay
Well, you can say so, in BMS, these missiles (rampage) are easy to use, as well as their range, also pleases!