Alpha Jet A Project
-
(One more ? )
Why not? Seems that the new beta version is top notch (Gudule). And free which is factor for anyone who wants to give a try.
-
Why not? Seems that the new beta version is top notch (Gudule). And free which is factor for anyone who wants to give a try.
But still incompatible with Falcon.
-
Do I understand that you are a Blender guy ?
(One more ? :()
Actually i’m a mechanical engineer so im expert with softwares like CATIA V5 or Solidworks but 3DS is a new beast for me never used im my life so i’m learning from scratch.
BTW - Tested the raw model and it looks good. Around 40K poly count but a steady 70 FPS on my 8 old PC so good to go.
-
Can you just, please, tell me that there is not even the smallest link between your work and :
For me, this is the very same models.
Geometry is same, including same mistakes both models, especially about the cockpit, seat structures, and also the horizontal stabilizer, at the same angle than AlphaBleuCiel Alpha-Jet for FSX (configured for animations)… I even see smoke dispensers…
You can not reuse their material, without a written permission, otherwise, this is a copyright infrigement. Absence of written clearance shall not be taken as a de facto clearance.
I warned you January 2nd, 2019 when we talked about it on Falcon Online TS3.
We are very strict on this forum about this, and no help will be given as long as there is no clarification about this issue.
Regards,
Radium
-
Can you just, please, tell me that there is not even the smallest link between your work and :
https://www.rikoooo.com/images/addon-ons/dassault-dornier_alphajet_paf_fsx_p3d/B2.JPG
https://www.rikoooo.com/images/addon-ons/dassault-dornier_alphajet_paf_fsx_p3d/C3.JPG
For me, this is the very same models.
Geometry is same, including same mistakes both models, especially about the cockpit, seat structures, and also the horizontal stabilizer, at the same angle than AlphaBleuCiel Alpha-Jet for FSX (configured for animations)… I even see smoke dispensers…
You can not reuse their material, without a written permission, otherwise, this is a copyright infrigement. Absence of written clearance shall not be taken as a de facto clearance.
I warned you January 2nd, 2019 when we talked about it on Falcon Online TS3.
We are very strict on this forum about this, and no help will be given as long as there is no clarification about this issue.
Regards,
Radium
Its not….
-
-
Can you just, please, tell me that there is not even the smallest link between your work…
For me, this is the very same models.
Geometry is same, including same mistakes both models, especially about the cockpit, seat structures, and also the horizontal stabilizer, at the same angle than AlphaBleuCiel Alpha-Jet for FSX (configured for animations)… I even see smoke dispensers…
Damn, I see a link between the two.
They are both the same aircraft!!
-
Actually i’m a mechanical engineer so im expert with softwares like CATIA V5 or Solidworks but 3DS is a new beast for me never used im my life so i’m learning from scratch.
So, may I suggest to create you 3dmodel with CATIA, then use STL workbench to transform high-poly to low-poly, then import in 3dsmax where you can do unwraping… (that is the easy to learn part of 3dsmax) I’ve done the travel once, so I know it’s feasible and even if 3dsmax is a pretty good soft, can’t be compared with DS product IMO.
-
New Updates.
Cockpit WIP its going well
Brand new panels not ever seen anywhere on the hoven
More news soon.
-
Hi!
Nice and fast progress!
Cockpit WIP its going well
Brand new panels not ever seen anywhere on the hoven
Be careful not to make the same glare-shield shapes mistakes than on X-Plane’s AJet from AIRAULT Emmanuel.
… (Well … I am fly funking here but …) look at the angle and left of internal (middle) part going inside the collimator. IMHO too much compared to what I know. (well … yes it is a detail).
Note also that there should be five switches below the alarms panel (not same spacing) … Backup brake leveller should be less rectangular …
And on both (your WIP and X-Plane) texture label of switches below panel are not correct.
On the right console … there are no two “Trim Cancel” switches (doesn’t exist) there.…
On your model, the throttle seems to be “only one” … but RL is more dissociated.
Sorry Sorry … I am funking fly again!
Hope RL picture will hep you to enhance.
-
Hi Dee-Jay
I will replace all the panel and switches.
I will base the pit in the IR AJET from portugal. Its very different from this one.
Also since you flew this bird can please tell me why POAF Ajet as a ECM Panel?
Does AJET ECM capable? -
I will base the pit in the IR AJET from portugal. Its very different from this one.
Different indeed, even further than the French version. The glare-shield do not comes down neither on Portugal version.
Other remarks remain valid (park/emerg brake handle) , throttle … switches below the failure panel.Up to you, if you want to make it better.
…
Does AJET ECM capable?
Can’t tell you mate … the only thing I can tell you is no ECM on french versions (only used for demonstration, training and flight school)
As soon as I can, I will upload some HiRes photos if you want (?) unless you have enough or focus on Portugal version only.
However … many stuff are identical (landing gear handle, throttles … engine panels … etc …)
-
Different indeed, even further than the French version. The glare-shield do not comes down neither on Portugal version.
Other remarks remain valid (park/emerg brake handle) , throttle … switches below the failure panel.Up to you, if you want to make it better.
…
Can’t tell you mate … the only thing I can tell you is no ECM on french versions (only used for demonstration, training and flight school)
As soon as I can, I will upload some HiRes photos if you want (?) unless you have enough or focus on Portugal version only.
However … many stuff are identical (landing gear handle, throttles … engine panels … etc …)
Sure Dee_Jay all the help is welcome. Please
-
Sure Dee_Jay all the help is welcome. Please
=> https://www.dropbox.com/s/nnkm5rsur6fqo7e/Pic%20Ajet.rar?dl=0
-
=> https://www.dropbox.com/s/nnkm5rsur6fqo7e/Pic%20Ajet.rar?dl=0
Thanks Dee-Jay
Yep the POAF A model is very different regarding RWR, ECM, and other avionics.
Not an easy task to implement all of this.
Nice datis of the gear bay, It will be useful
Hope to make this PIT as Real as Possible.
-
New Panels
worked fine
-
Going Mental Here
Photorealistic 3D Circuit breaker panel, ling panel and oxi panel.
-
One more
Anti Ice Panel and corrected scale down relative to Lights Panel ans Venting Switches
-
Looking awesome, brother!!
Just be aware of the texturing on the edges of the panels, you have to flatten the polygons when unwrappingThe textures look phenomenal!
-
Thanks my dear friend
Two more done, TACAN and AHSR.