Dcs World Viper and Falcon BMS
-
(1st time ever I see an argument in Russian dans le texte )
:spy:
dans le texte - est-ce en français?
-
Could it be CPU related? Is that SandyBridge system? Later, with 7x/IvyBridge chipset intel introduced PCIe 3.0. And AMD counterparts for that era are way less performant.
Maybe it’s worth to launch gpuz, it should show what is the utilisation of both CPU and GPU.
And what I-Haws said earlier, at the moment BMS engine is not very efficent so it might happen that GPU and CPU are under-utilised and things like heavy clouds and TGP/Mac camera will always cause some perf hit, no matter the hardware, point is just how much. -
Wow, a day away and 4 pages to read, thanks Arostar! :frusty:
I love the comparison to the “high FR” of DCS! A vacant world with nothing going on vs. a full scale country-wide war. Do yourself a favor, try a DCS TE with a lot of MOVING units in it all over the place and come back and show how high your framerates are. It will literally be a slideshow on just about any system made, including mine which is a pretty high spec.
look i don’t compare bms with dcs, i just say about bms performance problems is that hard to understand? i just want to fly on f-16! i’ve tried agm 65 maverick training mission in bad weather and it has 38-50 fps without tgp enable
-
Could it be CPU related? Is that SandyBridge system? Later, with 7x/IvyBridge chipset intel introduced PCIe 3.0. And AMD counterparts for that era are way less performant.
Maybe it’s worth to launch gpuz, it should show what is the utilisation of both CPU and GPU.
And what I-Haws said earlier, at the moment BMS engine is not very efficent so it might happen that GPU and CPU are under-utilised and things like heavy clouds and TGP/Mac camera will always cause some perf hit, no matter the hardware, point is just how much.My computer is 11 years old! Motherboard Rampage 2, I7 990X processor, 1080T video and SSD drive and everything just flies in the midst of the campaign.
This guy has an equipment conflict somewhere, maybe the joystick is not configured correctly - this is exactly what happens. -
Could it be CPU related? Is that SandyBridge system? Later, with 7x/IvyBridge chipset intel introduced PCIe 3.0. And AMD counterparts for that era are way less performant.
Maybe it’s worth to launch gpuz, it should show what is the utilisation of both CPU and GPU.
And what I-Haws said earlier, at the moment BMS engine is not very efficent so it might happen that GPU and CPU are under-utilised and things like heavy clouds and TGP/Mac camera will always cause some perf hit, no matter the hardware, point is just how much.my cpu i7 2600k works fine and loads a video card on 99% in other games so there is no issue with it, each core has 4.5Ghz performance
-
my cpu i7 2600k works fine and loads a video card on 99% in other games so there is no issue with it, each core has 4.5Ghz performance
Какой джойстик используешь ? Что еще подключено к компьютеру ?
Which joystick do you use? What else is connected to the computer?
-
Решение в данном случае такое.
Необходимо все оборудование отключить .Оставить только мышку и клавиатуру и запустить Фалькон . Включить “снайпер” и смотреть изменения ФПС . Что бы включить счетчик ФПС надо нажать комбинацию Альт + С и нажать F. В левом верхнем углу должен будет включится счетчик.The solution in this case is this.
It is necessary to disconnect all equipment. Leave only the mouse and keyboard and launch Falcon. Turn on the “sniper” and watch FPS changes. To turn on the FPS counter, you need to press Alt + C and press A. In the upper left corner, the counter will turn on. -
Какой джойстик используешь ? Что еще подключено к компьютеру ?
Which joystick do you use? What else is connected to the computer?
стоят контроллеры от vkb njoy32 на всех джоях, гарнитура g430, ик клипса, вебка ps eye, мышь и клава по стандарту
there are controllers from vkb njoy32 on all joystics, g430 headset, ir clip, ps eye webcam, mouse and keyboard according to the standard
-
my cpu i7 2600k works fine and loads a video card on 99% in other games so there is no issue with it, each core has 4.5Ghz performance
may I suggest you to to take a look on CPU/GPU utilisation when running BMS? Each game has its own bottlenecks, for one it’ll be CPU for other GPUs and some (like 1st Dungeon Siege) are just slow.
(yep one could expect that 18 years old game would just fly on modern system, but for y 2.16 GHz Core2Duo and Radeon HD6870 it still slowing down to ~24 FPS in few locations when run @19200x1200 res.) -
стоят контроллеры от vkb njoy32 на всех джоях, гарнитура g430, ик клипса, вебка ps eye, мышь и клава по стандарту
there are controllers from vkb njoy32 on all joystics, g430 headset, ir clip, ps eye webcam, mouse and keyboard according to the standard
Well, now everything is clear)). You made a mistake somewhere when programming your joey. I have three joeys. Warthog, Cougar and Black Mamba. Namely Mamba sometimes gives the same jokes. For example, I forgot the toggle switch in one of the positions. And often when programming, the controller sometimes prescribes the same command to the two toggle switches. This is where your brakes lie.
Ну теперь все ясно )) .Ты где то ошибся при программировании своих джоев. У меня три джоя .Вартхог ,Кугар и Блак Мамба.Именно Мамба иногда выдает такие же приколы. Например забыл тумблер в каком то из положений .И часто при программмировании бывает контроллер прописывает на два тумблера одну и туже команду. Вот тут и кроются твои тормоза.
-
Решение в данном случае такое.
Необходимо все оборудование отключить .Оставить только мышку и клавиатуру и запустить Фалькон . Включить “снайпер” и смотреть изменения ФПС . Что бы включить счетчик ФПС надо нажать комбинацию Альт + С и нажать F. В левом верхнем углу должен будет включится счетчик.The solution in this case is this.
It is necessary to disconnect all equipment. Leave only the mouse and keyboard and launch Falcon. Turn on the “sniper” and watch FPS changes. To turn on the FPS counter, you need to press Alt + C and press A. In the upper left corner, the counter will turn on.какая связь между производительностью видео и подключенным оборудованием?
what connection with video performance and inputted equipment? -
it is also not good to install falcon on flashdisc
But 50fps is not that bad, flanker 1 up to 1.5 was stuttering regardless hardware. It had bad coded flightmodel… it was fixed in 1.5. IMHO patched F3.0 is still better.
BTW set low-resolution clouds and per-vertex lighting and you will bw fine. -
какая связь между производительностью видео и подключенным оборудованием?
what connection with video performance and inputted equipment?Прямая.
Straight.
-
Well, now everything is clear)). You made a mistake somewhere when programming your joey. I have three joeys. Warthog, Cougar and Black Mamba. Namely Mamba sometimes gives the same jokes. For example, I forgot the toggle switch in one of the positions. And often when programming, the controller sometimes prescribes the same command to the two toggle switches. This is where your brakes lie.
Ну теперь все ясно )) .Ты где то ошибся при программировании своих джоев. У меня три джоя .Ватхог ,Кугар и Блак Мамба.Именно Мамба иногда выдает такие же приколы. Например забыл тумблер в каком то из положений .И часто при программмировании бывает контроллер прописывает на два тумблера одну и туже команду. Вот тут и кроются твои тормоза.
ничего я не перепутал, не пиши пожалуйста если не знаешь. я уже сказал выше что падение фпс связано с погодой, тгп и прочим а не тем о чём ты пишешь. у меня всё так настроено ещё со времён моей старой видеокарты и до моего знакомства с бмс и проблем с этим никаких нет с тех пор от слова совсем, зависимость идёт именно от графики в bms
I didn’t confuse anything, please do not write if you do not know. I already said above that the drop in FPS is connected with the weather, tgp and other things, and not what you write about. I have everything so tuned since the days of my old video card and until I became acquainted with bms and there are no problems with it since then from the word at all, the dependence goes on the graphics in bms
-
This post is deleted! -
it is also not good to install falcon on flashdisc
But 50fps is not that bad, flanker 1 up to 1.5 was stuttering regardless hardware. It had bad coded flightmodel… it was fixed in 1.5. IMHO patched F3.0 is still better.
BTW set low-resolution clouds and per-vertex lighting and you will bw fine.but since i tried per-vertex lighting i stopped to see my taxi light anymore, it’s sad
-
(1st time ever I see an argument in Russian dans le texte )
:spy:
Yeah feels like the rosetta stone for russian and english
-
but since i tried per-vertex lighting i stopped to see my taxi light anymore, it’s sad
Than Falcon BMS is your great daylight only simulator. You can fly night missions in DCS.
-
Boys, i’ve already covered the set up with this config in guides I linked. This is not a puzzle, it’s already solved. Perhaps it’s time to lock this topic as well.
Пацанчики хорош чики брики, всего уже описано до вас в гайдах линками выше. Если не нравиться их пользовать - не надо, но и жалобы тогда надо бы поумерить. Пора пора тут топик закрывать, а то уже ни в какие ворота тут нецивилизованный базар пошел.
-