Morphine's Profile
-
So… crazy late reply. Sorry. Thanks Gastone. That seems to be my issue. Sucks. I’m way to lazy to try to build a new key map My BMS days are over unless/until TM fixes Target.
Hi SageOT I had the same error; I fixes it by uninstalling the Warthog drivers and TARGET, dowloading the new versions of each, and importantly making sure your throttle and stick are not plugged in during TARGET re-install. That worked for me…
-
Sorry guys I have troubles with the profile…when I load it it starts then after a while in the Sim the axis stops working…it happens as I touch the throttle and so it is unusable.
It is not the only script that has the same behavior, but others are for Dcs.
I have win 10 up to the latest updates and the latest drivers and firmware for the warthog.
Can someone point me to a fix?
PS I see only thrustmaster combined in the USB control panel and I tried to uninstall and reinstall both Target and drivers
-
Hello Morphine,
I’m just wondering whether you’d be able to help me out with my HOTAS Warthog throttle. I am currently using your profile and it has been a great one for me and I appreciate the work that you’ve put into it. I’m using version 1.0 of your profile.Here’s my question:
What would I need to do to use the left throttle axis to control the two nozzle controls for the Harrier in BMS 4.33.4?
AFDecExhaust -1 0 0X57 3 0 0 1 “VTOL-Exhaust decrease angle”
AFIncExhaust -1 0 0X58 3 0 0 1 “VTOL-Exhaust increase angle” -
I used your profile for warthog.(…tmc).Everything is normal and every coomand works well but i formated the pc and then install falcon and target script editor.After apply your profile, throttle idle detent does not work.
Actually phscially throttle idle position (not full back just back) but in the sim setup,axis shows full back…
i mean that how can i add 5% deadzone ? your codes does not match the falcon i think…
i hope to say understandable…(sorry for language)…
Thanks a lot
i think this video shows more clearly … .
-
From what I see I your video,in the BMS control panel, the device selected is Thrustmaster Root. This usually indicates that there is a bug interfering with target. This bug is usually caused by teamspeak.
See this thread for solutions.
https://www.benchmarksims.org/forum/showthread.php?32399-A-Guide-to-Morphine’s-Profile-for-BMS-4-33-and-Beyond -
From what I see I your video,in the BMS control panel, the device selected is Thrustmaster Root. This usually indicates that there is a bug interfering with target. This bug is usually caused by teamspeak.
See this thread for solutions.
https://www.benchmarksims.org/forum/showthread.php?32399-A-Guide-to-Morphine’s-Profile-for-BMS-4-33-and-Beyondi know this thread but there is no solution here…:(
-
I used your profile for warthog.(…tmc).Everything is normal and every coomand works well but i formated the pc and then install falcon and target script editor.After apply your profile, throttle idle detent does not work.
Actually phscially throttle idle position (not full back just back) but in the sim setup,axis shows full back…
i mean that how can i add 5% deadzone ? your codes does not match the falcon i think…
i hope to say understandable…(sorry for language)…
Thanks a lot
i think this video shows more clearly … .
i solved it
HOW TO SOLVE ;
1-Uninstall Thrustmaster and saitek drivers (do not unplug the joystick throttle and rudder pedal)
2-Uninstall Target Script Editor and Logiteck (Saitek) Software
3-Unplug all devices (Joststick, Throttle and Rudder pedal)
4-Restart Computer
5-Install Thrustmaster and saitek drivers (The squence is firs TM and then Saitek)
NOTE : while installing TM driver,you have to plug joystick firstly
6-Install TM and Saitek SoftwareThat’s OK .
-
Got a quick question.
When I don’t run your profile with the TARGET software, I can select my rudder pedals in the advanced options. If I run the profile, I can’t select my rudders ingame.
What can I do to get them work with the profile? I’d have the TM rudder pedals.
-
Got a quick question.
When I don’t run your profile with the TARGET software, I can select my rudder pedals in the advanced options. If I run the profile, I can’t select my rudders ingame.
What can I do to get them work with the profile? I’d have the TM rudder pedals.
Go check the thread below, Gastone has been keeping the script updated and has a version for using the rudder pedals. There’s a line that needs to be added to exclude them from the profile.
https://www.benchmarksims.org/forum/showthread.php?32399-A-Guide-to-Morphine%E2%80%99s-Profile-for-BMS-4-33-and-Beyond -
Go check the thread below, Gastone has been keeping the script updated and has a version for using the rudder pedals. There’s a line that needs to be added to exclude them from the profile.
https://www.benchmarksims.org/forum/showthread.php?32399-A-Guide-to-Morphine%E2%80%99s-Profile-for-BMS-4-33-and-BeyondGreat, Thank you!
-
Hi Pilots,
I’ve updated the Morphine’s Profile to be compatible with the 4.34 “BMS Full keys”
You can download it here : https://drive.google.com/file/d/1kzh7MuFMd2mjs59eoBekh645derbKcCP/view?usp=sharing
it also works with MFD Server,Pease let me know if you have issues
Enjoy (thanks to Morphine and Gastone)
-
Thanks Benco for your work.
I have a small mistake.
In the Autopilot Select Switch B, in the throttle.
It should be: Alt (pitch) Hold.
But instead it shows: F-18 throttle - ATC Button. -
dead link… any alternative in order to download?
-
Sorry,
The refresh link with the fix @Redman
https://drive.google.com/file/d/1kzh7MuFMd2mjs59eoBekh645derbKcCP/view?usp=sharing
Thanks for your feedback ! -
No… Thank you my friend!!
-
I hope I haven’t messed up here but this updated profile still isn’t working correctly. China hat keeps putting my left MFD in to the Test page and the Mic Hat does all kinds of strange things.
-
I hope I haven’t messed up here but this updated profile still isn’t working correctly. China hat keeps putting my left MFD in to the Test page and the Mic Hat does all kinds of strange things.
Check your devicesortting.txt and make sure thrustmaster combine is at the top. Mine looks like this.
{FFFF044F-0000-0000-0000-504944564944} "Thrustmaster Combined" {B351044F-0000-0000-0000-504944564944} "F16 MFD 1" {B352044F-0000-0000-0000-504944564944} "F16 MFD 2" {C0F2068E-0000-0000-0000-504944564944} "CH Pro Pedals USB"
-
Hi Benco,
I used Morphine’s profile in 4.33. Installed yours but it seems to have different functions than Morphile’s profile. For example, the NWS is gone and being replaced by remove pilot .
Did you modify Morphine profile a lot ?
-
Hi cobragva,
This profile works only with 4.34 using the key file joined.
The only things I changed are on the hat at the front of the throttle. -
Hi Benco,
Thank you for your quick answer.
I used your version 5 of your tmc with your key file.
However, when I press the warthog button which was used for NWS with Morphine profile, the outcome with your profile is to remove the pilot in the cockpit.
Is this intended ? Do you have the same outcome ?
Thanks in advance for your answer.
Kind regards,
Pascal