Ahhh, now i understand what happened.
Thanks a lot guys!
Posts made by Buhli
-
RE: TMS Up changes steerpoint on the Harm display
-
RE: TMS Up changes steerpoint on the Harm display
I did a remote session this morning, so i’m sorry for the bad quality:
https://www.veed.io/view/223bab43-0c10-4fb9-b3ab-7649a5676b61?panel=share
I hope you guys can see it.Buhli
-
RE: TMS Up changes steerpoint on the Harm display
Yesterday i had the same issue again, but i forgot to make a small video and check cords.
This time i flew to steerpoint 96 and it switched to steerpoint 61. when i pressed TMS Up. No steerpoint 61 was set by me.
Maybe i’m wrong, but i mean, i pressed TMS Up twice when the curser on the HAD was over the target, like a double click.
I’m off for a week now and try again next sunday.Best regards
Buhli -
RE: TMS Up changes steerpoint on the Harm display
@Zeus: yep, that’s what i did.
Btw, the theater is Balkan.@CriticalMass:
That’s what i found in the ini file.The mission is done, so i can’t check the cords anymore.
If it happens again, i will have a look into the steerpoint cords.Thank you guys
-
RE: TMS Up changes steerpoint on the Harm display
@CriticalMass
Nope, i didn’t set a PPT for 65.
I moved the curser on the HAD for example over a search radar and press TMS Up.
Thank you for your quick reply!Best regards
Buhli -
TMS Up changes steerpoint on the Harm display
Hi there,
i’m on the way to target steerpoint 99 i set, with the Harm display SOI on the left MFD.
Any time i lock a target with TMS Up, it changes the waypoint to 65.
Do you guys have a clue what’s wrong?Best regards
Buhli -
Alternative Launcher Key Mapping
Hi there,
i mapped my keys with the AL and it works great for me.
Do you guys have an idea where and under which name they are stored, so i can save them? -
RE: Constellation Alpha help
@jayb Thank you jayb!
I guessed it and will Gremling give a try.Cheers
Buhli -
Constellation Alpha help
Hi there, maybe you guys can help me out here.
On my Alpha i can’t use the microstick for trimming, because the buttons are not detected. Just button 32 would work.
In the Virpil software i set them from axis to button and it works just fine in DCS or IL2.
But not in BMS.
Is it there a limit for buttons???
Here is a screenshot from the test, the buttons work.Thank you for your help gents
Buhli -
RE: Aegean theater v3.x - BMS 4.35
Thank you very much.
Does it work with 4.35 U3?best regards
Buhli -
RE: Warthog and Windows 10
Sorry for confusing you.
It works very well now.Buhli
-
RE: Warthog and Windows 10
I gave the Alternate Launcher a try and i love it.
It works great for me, just the key combos with invoke i don’t understand where to set or activate.Great job on this tool
Buhli -
RE: Warthog and Windows 10
I’m sorry for the late reply, was too busy to send all my co-workers into the home office.
Thank you for your advises, but nothing helps me in this case. I replugged the controllers and started my profile, not a script. It was running for a minute or so, then it lost the programming. Maybe that’s the fault, using a normal profile, not a script?
I’m going to test the BMS Alternate LauncherBMS Alternate Launcher this weekend, hopefully i can make some rounds without frustrations.Many thanks so far
Buhli -
RE: Warthog and Windows 10
Thank you very much, i will test both options.
Cheers
Buhli -
Warthog and Windows 10
Hello,
i hope, i’m not disturbing you with maybe well known issues.
HOTAS Warthog with the latest TARGET software and firmware
My problem:I have 3 controllers in the setup –> controller screen, CH products pedals, Warthog joystick and Warthog throttle. Does the Warthog devices not be combined?
When i set all the axis to the devices, nothing happens in the game, no rudder no throttle, just the stick.
If i load a naked profile with the TARGET software, i mean just with connected devices without any functions, the game shows me in the controller setup a combined Warthog (root). What ever that means, but i can set all the axis and they work.
But if i load a profile with functions and key bindings with the TARGET software, the axis work untill i press the first button, for example “b” for the air brake. From then nothing happens if i press anything, even Escape doesn’t work anymore.Very frustrating, i had no issius under Windows 7.
The energy settings for the USB HUBs are NOT controlled by Windows.
Both controllers are pluged into an USB-2 Port.Does anyone have an idea, what i can change or set?
Cheers
Buhli -
RE: Need some help with the cannon and the curser pls
Thank you very much for the quick reply and advises.
I will test it at the weekend and give you some feedback.Buhli
-
Need some help with the cannon and the curser pls
Hi guys,
after two years without Falcon, i have installed BMS 4.33U3.
Target software 3.0.16.615 is installed.I testet all options for the gun-trigger, but it fires all bullets until it’s empty or with the pulse-option it fires just a single bullet, so i have to press the trigger again and again.
On my curser i have the problem, one single movement and it runs all over the place, it’s not to stop.
The axis settings are as you can see in the pic.
It works perfec earlier, but now, idon’t know what’s wrong.
Have you guys one or two ideas for me to fix my probs?best regards,
Buhli -
RE: Balkans Bugs and Crashes Thread
Hi all,
i am back on Falcon after a couple of years.
Thank you for all the great work you guys did for the sim.I just startet a new Balkan campaign and after couple of flights, the ATO generates some SEAD-strikes deep into enemy territory as a single mission.
Is it a known bug or is it just my end?Regards,
Buhli