To add on to what others are saying, you can change the time when AI spawn prior to taxi. Changing that can let you “spawn” more or less aircraft on the base.
Posts made by Fearripper96
-
RE: question about place airplane (static) on airport
-
RE: DED Alignment questions
@jcook the only thing that will mess up an alignment is moving the aircraft - you can do everything else. Go to the menu with LIST-6. As for what the numbers mean, the easy explanation is that the left number counts minutes and the right the quality. 4 min for newer blocks if complete and 8 min for older.
-
RE: Virtual Crew Chief for BMS
This was what I was dreaming of when I first saw Bogey Dope’s video. Thanks for your efforts!
-
RE: Tips to engage SA-10's with HARM's?
@cchaparro you need to download Tacview (there is a free version here https://www.tacview.net/) to use .acmi files.
-
FORM knob not syncing in MP
Hey all,
Just wondering if anyone can confirm my experience with the external lighting in MP - when using the BRT/DIM switch for wingtip lights all is fine; setting these to OFF and using the FORM knob to control the brightness on the wingtip lights isn’t synced to other aircraft. They appear off to everyone else, regardless of what you see locally.
Is this intentional to save data traffic, or a bug, or simply not implemented?
-
RE: 4.37 CTD when entering 3D VR
@Staniol also make sure you have no VR overlay apps running when you test. I noticed that OVR Toolkit overlays make BMS crash, but certain others work (can’t say for sure which).
-
RE: IVC DSP Based on Server Position Rather than Client
This seems to be the same thing that we discovered when testing for the same issue with F4RADAR operators being masked/attenuated. Switching the names fixes it (and that’s also mentioned in the F4RADAR instructions).
-
RE: Idle cut off
@Gancio I had this issue and found the configurator pointing to 4.36 instead of 4.37, check the version in the configurator and make sure you’re changing the correct version.
-
[4.37] E-Jett drops CATM pylons
Hi, thanks for the hard work with the update.
Reporting a possible bug - using the emergency jettison drops all CATM weapons from their pylons. The AN/ASQ-T50 stays on.
-
RE: Launch without any setup override and VR switch
@chinpok someitmes simappro needs to be started to make the device “work”. I would recommend following chihiro’s advice and using the throttle as 1 device with 128 buttons though, it makes it much easier to bind.
-
RE: [4.36.1] R77 fired by AI goes dumb off the rail
@DUSTOFF17 yeah, me neither, I have not seen it since reporting. It was probably a coincidence of multiple things.
-
RE: [4.36.1] R77 fired by AI goes dumb off the rail
The first engagement is fully normal, the second one close range is the one the report concerns. I’m not 100% sure of the AI skill level, since it’s a default TE I don’t know how to check it. @CheckPoint . It might simply be a skill level issue with the Flanker losing lock, but I think we were close enough for the R-77 to find us if it had turned the radar on.
-
RE: manual trim test and stores jettison issue
@BVT_Gadget are your bindings setup as “STICK: Trim x” or “TRIM: Trim x”? It works for me with bindings on the former, as it should disconnect the stick trim but not the manual trim wheels, which are the latter binding.
-
RE: manual trim test and stores jettison issue
@BVT_Gadget for SJ, make sure you set up the SJ mastermode in the DTC in 2D.
-
[4.36.1] R77 fired by AI goes dumb off the rail
During a playthrough of the BARCAP training TE we noticed that two R-77 missiles fired by the Su27 pair never tracked off the rail despite the aircraft having a good lock on the target. I’m unsure if this is a bug or not, but figured it was worth a report in case.
I wouldn’t know how to reproduce it other than fighting R77 equipped fighters and seeing if it happens again. ACMI attached and POV video of Falcon 11 available upon request.
-
RE: BMS audio output question
@Atlas Glad it worked out for you!
-
RE: BMS audio output question
@Atlas That’s odd. Is it not letting you download? If it does, the app ends up in your bottom right taskbar (by default it has the logo as an icon, but it might also look like the system sound manager as well). If it’s not in there, I’m not sure what the problem could be.
-
RE: BMS audio output question
@Atlas if you’re on Win10, I use a little app named “Eartrumpet” which lets you pick a sound source for each application running. I set BMS to always use one device (headphones) and if that isn’t found, it uses the default. It might work on Win11 as well, but unsure.
-
RE: Mission Commander beta release
Falcas, huge thanks for that latest version, I was having the TE issue and your fix seems to work so far. Thanks also for the explanation of what’s actually going on, and what it actually wants to replace in each box, those help a ton!