Thanks but should this be a very small plain white file 1.05Kb file
Mick Worsnup
Posts made by mikwors
-
RE: JanHas Models & Skin Thread -Compatible with 4.36
-
RE: JanHas Models & Skin Thread -Compatible with 4.36
Hi.
Downloaded your new models for 4.34 and read the install instructions but don`t know where to find 8042.bmp file.
Any help would be appreciated
Many thanks
Mick Worsnup -
RE: 4.34: Enabling Warthog idle detent (without TARGET)
Hi.
I`ve been following this thread trying different setting finally got it to work perfectly by adding :-
SimThrottleIdleDetentBack 61 -2 -2 0 0x0 -1
SimThrottleIdleDetentForward 61 -2 -2 0x42 0x0 -1
SimThrottleIdleDetentForward 314 0 0XFFFFFFFF 0 0 0 1 “TQS: CUTOFF RELEASE - Idle Detent - Idle”
SimThrottleIdleDetentBack 314 0 0XFFFFFFFF 0 0 0 1 “TQS: CUTOFF RELEASE - Idle Detent - Off”
Idle Cutoff off in config.
Thanks for all the help
Mick Worsnup -
RE: U5 doesnt work in 64 bit for me
Hi
I suddenly started having same problem which Nvidia drivers are working for you I don’t want to have to re-install unless last resort.
Many thanks
Mick -
RE: Warning: Windows 10 Fall Creators Update - Loss of Antialiasing
all through Nvidia off in BMS UI
-
RE: Warning: Windows 10 Fall Creators Update - Loss of Antialiasing
Took the plunge and installed 1709 BMS running fine with latest Nvidia drivers
-
RE: Falcon BMS 4.33 U1 CTD
Problems solved with fresh install
-
Falcon BMS 4.33 U1 CTD
Hi
I have had to replace my AMD R9 390 With a Geforce GTX 1060 3Gb video card and now get a BMS has stopped working error everytime the program tries to enter the 3d world. The program is installed on my D Drive. I have included the crash log
my system specs are :- Intel i7-6700k @ 4.00Ghz 16Gb Ram Win10 64 Track IR Cougar Hotas.
Any advice would be greatly appreciated
Many thanks
Mick================================== CRASHLOG =====================================
Falcon BMS.exe caused an EXCEPTION_BREAKPOINT in:
000000008B219E08 KERNELBASE.dll, RaiseException()+104 byte(s)
Exception handler called in CRT Memory Depletion.
BreakpointBytes at CS:RIP: 48 8B 8C 24 C0 00 00 00 48 33 CC E8 78 B0 01 00Registers:
RAX=0x0000000000000050 RBX=0xfffffffffff7f5e4 RCX=0x000000000080007e RDX=0x000000004159c0e0
RSI=0x0000000000000000 RDI=0xfffffffffff7f5e4 RBP=0x000000002296f580 RSP=0x000000002296f310
RIP=0x00007ff88b219e08 FLG=0x0000000000000202
R8=0x000000002296efb0 R9=0x0000007e00000100 R10=0x0000007e00000002 R11=0x0000003f00000104
R12=0x0000000000000000 R13=0x00000000498b6010 R14=0x000000000dbf1960 R15=0x0000000004f6df70
CS=0x0033 DS=0x002B SS=0x002B ES=0x002B FS=0x0053 GS=0x002BCall Stack:
0033:000000008B219E08 KERNELBASE.dll, RaiseException()+104 byte(s), Parameters(0x0000000004B54F88 0x00000000FFF7F5E4 0x000000002296F3D8 0x000000002296F580) -
RE: JanHas Models & Skin Thread -Compatible with 4.36
Thanks got it had to use Explorer Chrome still not showing it even after refresh
Mick
-
RE: JanHas Models & Skin Thread -Compatible with 4.36
Hi, I Can
t find a link to this model on your site all the rest I
ve had no problem with have you a direct link
Many thanks
Mick -
RE: Cougar Throttle question
Works fine with win10 but see below if you have problem with microstick it took me a year to sort it out.
OMG think I
ve solved it after 1 year here
s how:- 1.Open Foxy 2. Go to cougar menu. 3. Control panel gaming options. 4. Properties. 5. Settings. 6. Calibrate.
Follow instructions nothing showed for rudder or toe brake left or right to start with but when completed everything works fine.
Settings in BMS as per duncs recommendations.
Hope this works for you -
RE: Confusion over microstick mechanics
Glad you getting it sorted . Can
t believe I didn
t try it before got to get used to using micro-stick again now! -
RE: Confusion over microstick mechanics
OMG think I
ve solved it after 1 year here
s how:- 1.Open Foxy 2. Go to cougar menu. 3. Control panel gaming options. 4. Properties. 5. Settings. 6. Calibrate.
Follow instructions nothing showed for rudder or toe brake left or right to start with but when completed everything works fine.
Settings in BMS as per duncs recommendations.
Hope this works for you -
RE: Confusion over microstick mechanics
Hi.
Ive been following this thread with interest as I have the same problem see [https://www.benchmarksims.org/forum/showthread.php?23626-Cougar-microstick-problem](https://www.benchmarksims.org/forum/showthread.php?23626-Cougar-microstick-problem). I have never found a solution but the weird thing is that when I
m in 3d cockpit view using Track IR my pov hat on cougar moves radar cursors no idea how or why. In Bms I have cursor x & y mapped to keyboard.
Hopefully someone will be able to finally solve our problem.
Mick -
RE: 4.33.1 will release shortly: what you need to know and how to be prepared
I can`t believe how people can complain about paying such a minimal amount for such an awesome sim I had the original Falcon 3.00 it was the main reason i got a pc, thanks to all the developers for carrying it on
-
RE: Cougar microstick problem
After numerous e mails to and from Thrustmaster they have confirmed that there is a problem in Win 10 but as Cougar is no longer supported they cannot rectify it.
Does anyone know if the same problem would occur with a Warthog Hotas system using clean Win 10 install instead of upgrade from previous version of Windows.
Thanks
Mick` -
RE: Cougar microstick problem
Hi.
Still had no success but think the problem is that no data is being saved in the .ccf file here is a copy of mine[Calibration]
0=17314,43716,64770
1=12646,39984,64770
2=54240,39968,25536
3=45120,29856,15136
4=8512,32816,57120
5=0,35392,57120
6=0,36064,57120
7=0,0,0
8=0,0,0
9=0,0,0
AxesStatus=2Will email Thrustmaster support but not too hopeful, looks like i`ll have to use keyboard to move curser
Mick
-
Cougar microstick problem
Hi.
Ive just got a new I7 system with win 10\. After installing vista 64 bit drivers for my cougar all seemed ok except for the microstick function. During calibration the setting range seems to be normal but when in ccp viewer the microstick either doesn
t move or jump from top to bottom of display. In BMS avionics setup the same thing happens, when connected to my old xp pc all still works ok. Not sure if there could be any conflicts but tried disconnecting all other devices with no success.
Any help or advise would appreciated.
Many thanks
Mick -
RE: Weapon Delivery Planner released
Most likely you are missing (or have been deleted) a file. That is when the installer is re-installing the missing file.
gr Falcas
What sort of file only set up, msi and 2 text files in download. net framework etc all upto date. Noticed the set up exe is slightly smaller than ones that worked