@merci beaucoup pour l ,info
Posts made by tecumseh
-
on call CAS
i forgot to mention that on call CAS is in falcon4.34 in Korea and in campain ; and when it ask to fly to target area and contact FAC; how do i contact FAC ???
-
on call cas
once near on site check point,how and who do i get targets information from ???
-
RE: engine overheat
<p>@LorikEolmin on the latest mission i did land at 157knots ,gliding angle was 3 degrees and recovery angle at 13 degrees and still engine was shut down with oil ifault indicator on </p>
-
engine overheat
in BMS4.34 why is the f-16 engine overheats on landing in kunsan after a mission completion : is there something wrong with my landing parameters which i do verify and check closely.
-
RE: korea pusan
@jayb in BMS 4.34 Pusan airbase is on the east outskirt of Pusan. And i noticed that it is quite narrower than Kunsan jor that matter.
-
korea pusan
landing at pusan airbase: why is it so difficult to land even with the correct landing parameters
-
Video card versus latest update
hi,
i need an experts advice on this issue.i have a GeForce GTX 460 1G 256-bit and after downloading the latest updates such as bms 4.32 update 7 version 4.10029(x86) plus Tom
s Korea new tiles the Simscrashes on long missions like #14257BAI take-off time 20:25 from KUNSAN in rolling fire from KOREA ORIGINAL.Do you think it stresses my video card to its limits and causes the crash????????.if so what actions would you recommend or what video
s card capacity would you suggest,thanks in taking the time to evaluate my problem:(
-
Under siege
hi guys,
when i try to go UNDER SIEGE in the balkan`s campaign i choose any missions and it crashes all the time!!!any of you guys experienced the same???anybody has a clue???
thanks.
-
RE: Toms Korea 2015
hi Tom,
thanks to Falcontower he gives the correct link to download Korea 2015;the download was a succes thanks to tou Falcontower.
And thanks to you Tom for this amazing work!!! -
RE: Toms Korea 2015
hi Tom,
sorry but i can`t download Korea 2015 with mediafire!!! would you know why by any chance???
thanks
-
AI versus wingmen A/A & A/G problems
just to thank DUBBSM for his technical solutions regarding this problem;i was lately in a campaign and faced the problem.search for some advices and found them when i keyed “wigmen”.i will try this procedure and see what happens???
thanks again.:D
-
RE: Profile attack pup-to-vrp
thanks again,
with all of these precisions,i will certainly improve my chances of success in those sead missions which is the sole purpose of this planning;that is to hit the target before being detected and getting out of the area safely with presumably a wingman. -
RE: Profile attack pup-to-vrp
thank you very much Frederf;
your explanations confirms most of my assumptions regarding the points for the different profile attacks and correct me if i`m wrong, the ranges are the distances from the target that these maneuvers are to be executed like for example the pull up and the dive and are likely approximations due to all other factors such as weight of aircraft and its payload,speed,offset angles,etc.in other words,only a guideline for the approach and attack rather than a precise path.???
thanks again.
-
Profile attack pup-to-vrp
hi guys,
when WDP establish the range for any of the points namely vrp,pup,oap1,oap2,does it refer to the distance between the point and the target and more precisely how do you fly according to these points specifications???thanks in advance
-
RE: JSOW
thanks for your help guys;i was able to sort it out.schnirdrman was right;once i got the jsow powered i went to the OSB WPN then uncage(U) or declutter also made sure the image was SOI in boresight mode.The trouble now is to find these tanks on the kotar range, not easy.
that is not easy to get them on the IIR.
-
RE: JSOW
thanks for your help guys;i was able to sort it out.schnirdrman was right;once i got the jsow powered i went to the OSB WPN then uncage(U) or declutter also made sure the image was SOI in boresight mode.The trouble now is to find these tanks on the kotar range, not easy.
-
RE: JSOW
understood and thanks again;but if it works like the mavericks how do i find the IIR on the mdf so that i can lock on with the tracking gates or lock on with the radar in slave mode;something i miss here somehow!!!
and thanks -
JSOW
in the korean training program what is the procedure to lock on a target and launch the JSOW;it doesn`t seem to work properly and to what purpose is that little cross in the GM mode for ???
thanks in advance for the info.