@Micro_440th said in Keyfile Changes U3:
No new callbacks for the F-16.
That´s what i wanted to hear
@Micro_440th said in Keyfile Changes U3:
No new callbacks for the F-16.
That´s what i wanted to hear
After setting it up from Scratch, and copying the relevant files (User .cfg, callsign.lbk & ini , RTT.client ini , Ivc_client.ini, axxis mapping.dat, device sorting.txt , phonebook.ini and keyfile ) from my U2 Backup everything works fine so far
Hi,
are there any Callback changes/renamings beside the new F-15 ones ?
Got still some support from @Micro_440th
anyway nothing worked… installing now fro scratch
BMS wont start after U3
Get only the “BMS & Micoprose” Screen.
After that i´ll be back on my desktop
@Doc0301
Check in the Controller Setup .
Maybe the HMCS Knob ist assigned to an Axis, if so , the Knob cannot be manipulated in 3dPit
@Sunnny its just a typo in the keyfiles
@kampfalk said in Exporting the Caution Light Panel with RTTR:
Hello,
Is there a way to export the Caution Light Panel using RTTRemote?
No, not possible.
as Terminator said, you can use Helios, or
https://forum.falcon-bms.com/topic/20238/ice-s-falcon-bms-profile-updated-for-bms-4-36
MFD Extractor
https://github.com/lightningviper/lightningstools/tree/master/src/MFDExtractor
or YAME
https://forum.falcon-bms.com/topic/6081/yame64-suite
@Snake122 said in 4.37 VR cockpit scale feels off:
mouse cursor is way off (holding cursor over FFI actually clicks TIME or CRUS ICP buttons).
Do you have a Touchscreen Monitor ?
My squadmate had the same issue with his 2nd Screen (Touchscreeen with Helios), afte rdisconnecting this 2nd Screnn everything was ok.
Maybe tis helps
@Flash-0 had the Same Thing
Try to reset the Enviroment In the Windows WMR section. After that rerun Room setup in Steam vr
What gives a Blast in Framerate ist disabling the PC Display. While in VR you dont need it unless you have someone want to look over your shoulder
set g_bVRNoPresent 1 // This will not display the companion window in VR (only HMD will show image in 3d).
This will nearly double my Framerate (BMS Framerate Display)
@Rambo another suggestsion,
befor you do so, i recommend to backup your entire Config folder
Hi
you can use following Files (but dont use the new laucher in that case)
DeviceSorting.txt
axismapping.dat
Your Keyfile from 4.36 will work but has to be enhanced with the new Callbacks:
New Key File Functions.txt (xx:\Falcon BMS 4.37\Docs\01 Input Devices)
NOTE:
The following code lines contain all new functions introduced in
the latest BMS version with default key assignments for the standard
key files (Full, Blank, Basic, Minimum).
You can copy and paste them to your key file.
It is recommended to paste the lines to their desired category which
requires some work on your side.
However, pasting them at the end of the key file should work as well.
#===================================================================================
SimDoNothing -1 0 0XFFFFFFFF 0 0 0 -1 “======== NEW 4.37.0 FUNCTIONS ========”
SimXMTASPISOper 116 0 0XFFFFFFFF 0 0 0 1 “ECM: XMTASPIS Knob - Operate”
SimXMTASPISStdby 116 0 0XFFFFFFFF 0 0 0 1 “ECM: XMTASPIS Knob - Standby”
SimXMTASPISToggle 116 0 0XFFFFFFFF 0 0 0 1 “ECM: XMTASPIS Knob - Toggle”
SimEcmPowerOn 116 0 0XFFFFFFFF 0 0 0 1 “ECM: Power Knob - On”
SimEcmPowerOff 116 0 0XFFFFFFFF 0 0 0 1 “ECM: Power Knob - On”
SimXMitInc 116 0 0XFFFFFFFF 0 0 0 1 “ECM: XMT Knob - Increase”
SimXMitDec 116 0 0XFFFFFFFF 0 0 0 1 “ECM: XMT Knob - Decrease”
SimECMBit 116 0 0XFFFFFFFF 0 0 0 1 “ECM: Bit Test - Test”
SimEcmMode1 116 0 0XFFFFFFFF 0 0 0 1 “ECM: Mode 1 - Toggle”
SimEcmMode2 116 0 0XFFFFFFFF 0 0 0 1 “ECM: Mode 2 - Toggle”
SimEcmMode3 116 0 0XFFFFFFFF 0 0 0 1 “ECM: Mode 3 - Toggle”
SimEcmMode4 116 0 0XFFFFFFFF 0 0 0 1 “ECM: Mode 4 - Toggle”
SimEcmMode5 116 0 0XFFFFFFFF 0 0 0 1 “ECM: Mode 5 - Toggle”
SimVRHMDReset 116 0 0XFFFFFFFF 0 0 0 1 “SIM: VR Camera Rotation Reset”
OTWVRZoom 116 0 0XFFFFFFFF 0 0 0 1 “OTW: VR zoom”
OTWVRZoomToggle 116 0 0XFFFFFFFF 0 0 0 1 “OTW: VR zoom toggle”
SimExtlMasterCycleUp 116 0 0XFFFFFFFF 0 0 0 1 “EXT: MASTER Knob - Cycle up”
SimAntiColCycleUp 116 0 0XFFFFFFFF 0 0 0 1 “EXT: ANTI COLLISION Switch - Cycle up”
SimIFFMasterCycleUp 116 0 0XFFFFFFFF 0 0 0 1 “AUX: MASTER Knob - Cycle up”
SimCursorUpLeft 116 0 0XFFFFFFFF 0 0 0 1 “TQS: RDR CURSOR - Up Left”
SimCursorUpRight 116 0 0XFFFFFFFF 0 0 0 1 “TQS: RDR CURSOR - Up Right”
SimCursorDownLeft 116 0 0XFFFFFFFF 0 0 0 1 “TQS: RDR CURSOR - Down Left”
SimCursorDownRight 116 0 0XFFFFFFFF 0 0 0 1 “TQS: RDR CURSOR - Down Right”****
But if you will have have Traffic around the “Area” like this , it would offer some really nice scenarios
Re: Balkans Theater “civil” flights
Sorry for bumbing up this old Thread, but it would be really nice to have some civil Planes with different skinsets in a future Update
Hi,
is there any way to fix this problem without using Alternative Launcher ?
@Mav-jp
I remember LLTM 2004 held in the Aviation Museum Lelystad.
Damm long ago… and by the way , we won in 2006
The LLTM was a great Event and a huge part of my “Falcon life”
Between 2002 and 2014 i joined each of them. I miss it
Back in 2003 i made this one to honor the greatest Flighsim ever and his Community
When i remember right is was Free Falcon 2
Sorry for the poor Quality… to long ago
another one from 2004, celebrating our 5th Squadron Anniversary
and one from 2005 by KC