Falcon MFD Software for android tablets
-
That’s what you can get with Komurku program
Thank you man
Hi totiselles,
Great setup!!!
Could you share how did you do it?
Thanks,
-
Hi totiselles,
Great setup!!!
Could you share how did you do it?
Thanks,
The software needed for what you see in Totiselles attachment can be found in Post #1 herein. You will also need an Android device such as an Android phone and or Tablet. I myself use two 10 inch Android tablets. Looks like he is using one 10 inch tablet and one other device which is smaller.
-
Ok, finally reading back some pages in the thread, i got my problem solved by replacing “0x” with “0X” in the key file. And reloading everything. Seeing that this is a recurring issue, it would be good idea to note this on the first page of this post i think.
Another smaller issue i see: When turning (for example) the ECM program knob on the tablet app, it turns on PC cockpit, but when turning on PC cockpit it does NOT turn on tablet app.
Is this a known limitation?
Not so much a big deal, but it would have been perfect if both were always in sync.Anyway, it’s very good app!
Many thanks!Komurcu,
I just replaced they key file with the latest version of the key file done by Gastone based on Morphine profile (BMS_Full_&_Morphine_paddle_swap.key). when I run Falcon MFD Server and FalconMFD at the tablet everything is ok but I have the same issue of logic: pressing the buttons has no effect, the incoming msg list says “(SimCBEOSB_20L) Key Does Not Match”.
Question, Should I replace all the “0x” by “0X” or only a certain number of them? the ones related to the Buttons.
Thanks in advance -
Komurcu,
I just replaced they key file with the latest version of the key file done by Gastone based on Morphine profile (BMS_Full_&_Morphine_paddle_swap.key). when I run Falcon MFD Server and FalconMFD at the tablet everything is ok but I have the same issue of logic: pressing the buttons has no effect, the incoming msg list says “(SimCBEOSB_20L) Key Does Not Match”.
Question, Should I replace all the “0x” by “0X” or only a certain number of them? the ones related to the Buttons.
Thanks in advancePM me with an email address for a keyfile that should work.
-
First congratulations for the app ;).
One question Any opportunity to add POH?
-
Hey, been using that app for almost a year, without any trouble so far. Since U5 though, or so it seems, the app seems to lag increasingly during the flight. I also noticed Mozilla Firefox was very slow, in terms of connection. Only restarting Windows (10) can fix that, every time. Hope it helps spot a problem. I reinstalled the app already.
-
i am not sure. but problem look like windows 10
my be you cam format and reinstall your Windows -
I’m still on win7 and also sometimes see “lagginess” in the ICP sending commands to BMS, but that’s not new with U5 and usually a restart of the android app fixes the problem for me.
All the best, Uwe
-
Also being on wifi is not the best for snap response apps.
-
To feed the thread:
- been working well with win 10 so far
- restarting the app doesn’t help
- Firefox happens to be net slow but Edge is not.
-
Sorted.
There is obviously a server part for this app, on the PC. The client part on Android updates itself automatically, the server one on PC doesn’t check for updates. I suspect I was running an outdated server with an up to date client - which worked fine apart from that problem I’m describing.
My last flight was followed by correct Firefox behavior, and Mozilla wasn’t slow afterwards.
Cheers
-
Hi Komurku.
Great Software.
One Question.
How i can save my IP in the server? Always is 192.168.56.101 and my network is diferent
ThanksSorry for my english
-
Hi Komurku.
Great Software.
One Question.
How i can save my IP in the server? Always is 192.168.56.101 and my network is diferent
ThanksSorry for my english
thanks
which ip you want to save
also server and android ip should be same segment
that mean is
both are like 192.168.56.x -
Hi
My intern IP is 192.168.1.xgood morning.
The problem is that if I do not write my IP address correctly. In the corresponding box.
the Pc communication - Tablet does not workCheers
-
you can follow from images
good flight
-
Ok
Thank youGood flight
-
Komurcu abi merhaba programı kurdum ayarladım ingilizce dosyadan.türkçe döküman yazdığın ‘‘avcıfilo’’ linkleri çalışmadı ingilizce yaptım bağlandım tabletlere MFDlerin görüntüsünü tabletlerden alıyorum. fakat tablet üzerindeki tuşlar işlevsiz sadece görüntü var. key file’a yapıştırmamız gereken kodları da yapıştırdım fakat hareket yok hala yardımcı olursan sevinirim.Teşekkürler.
-
merhabalar kardeşim
bilgisayarda programı yönetici olarak çalıştırmayı denedin mi -
merhabalar kardeşim
bilgisayarda programı yönetici olarak çalıştırmayı denedin misen söyleyince hemen denedim.MFDlerin görüntüsünü alıyorum fakat hala tuşları kullanamıyorum.IP iki tane var biri 198… biri 127… 2. sinden bağlanıyorum ben alakalı olabilirmi?
-
ip 192. li olanı kullan
burdan da
https://mega.nz/#!WpIwzDBI!RbAaRIhsU6lBy0o81bDmeBh5sX-ieYyjMa_gYh9Iba8key file dosyasını indirmen gerekli