YAME64 suite
-
Hi guys,
I made some updates on the PC , so my display configuration is (all in one PC):
- 2560x1080 Monitor (21:9) connected to a Radeon RX480 graphics card
- 1920x1080 Touch screen which I use for YAME and Helios connected to a Radeon 290X graphics card
I also updated to Windows 10 and I’m having some issues:
- If I try to start YAME in normal mode it doesn’t start at all.
- If i change it to execute it as an administrator it executes properly and I see all the instruments perfectly, but then the mouse cursor starts to lag and I can’t even clic in other windows or applications.
When I was in Windows 7 I didn’t have the first monitor, so I don’t know If it is monitor related or windows 10, I guess the second as I previously had 3840x1080 curved display and it was working well.
Thanks. Best regards.
-
Hi guys,
I made some updates on the PC , so my display configuration is (all in one PC):
- 2560x1080 Monitor (21:9) connected to a Radeon RX480 graphics card
- 1920x1080 Touch screen which I use for YAME and Helios connected to a Radeon 290X graphics card
I also updated to Windows 10 and I’m having some issues:
- If I try to start YAME in normal mode it doesn’t start at all.
- If i change it to execute it as an administrator it executes properly and I see all the instruments perfectly, but then the mouse cursor starts to lag and I can’t even clic in other windows or applications.
When I was in Windows 7 I didn’t have the first monitor, so I don’t know If it is monitor related or windows 10, I guess the second as I previously had 3840x1080 curved display and it was working well.
Thanks. Best regards.
in yame do you have window maskef or antialiased? if so disable those settings
-
Thanks Roccio, I tried to disable antialiased first but same error, so I went with masked the and now it works perfectly again.
Does this mean I won’t be able to see it masked? Anyway I can mask it again?
Thanks. Best regards.
-
Thanks Roccio, I tried to disable antialiased first but same error, so I went with masked the and now it works perfectly again.
Does this mean I won’t be able to see it masked? Anyway I can mask it again?
Thanks. Best regards.
the masking has some big problems with one of the Windows update (iirc from 1709) so it won’t be available in the next release. this should not be a big problem as you can set helios to stay in foreground
-
Thanks, it works perfectly It was just curiosity.
Best regards.
-
Hi Roccio,
I am trying to use YAME32 Client on Windows XP, but It does not work: do you have advices?Thank You in advance.
Mauro
-
Found this on the min requirements on the BMS home page. Win XP support was dropped in 4.33 Update 3–only Update 1 and 2 will work on XP. This was due to future requirements and lack of OS support.
-
Hi Roccio,
I am trying to use YAME32 Client on Windows XP, but It does not work: do you have advices?Thank You in advance.
Mauro
what is the problem? and the system spec? and are you running yame as a network client or this xp pc is your falcon bms pc?
-
Hi Roccio,
Falcon BMS runs on win10 64 bit, and on this pc also runs YAME 64 Server. On an old netbook Asus eeepc900 with win XP SP3 runs YAME32 like client. The two pc are connected using LAN. previous version of YAME runs very well, but the last version does not run: when I start that, winxp says me that it is not a win32 application.Best Regards
-
Errrr yame64 doesn’t mean a 64bit application?
U can’t run s 64bit app on a 32bit operating system.Sent from my MI 5 using Tapatalk
-
Yame offers both 64 and 32 bit version.
Make sure you use the 32bit exe for your xp pc. -
Thank for your answer People, but obviously my english in not good: I’ll try to explain it again:
- Falcon BMS runs on a WIN 10 64 bit PC and on this PC runs YAME SERVER 64bit version;
- on another PC runs WIN XP 32 bit and ON THIS PC runs YAME CLIENT 32bit version;
- the two PCs are LAN connected.
The previous version of YAME ( 64 bit server side, and 32 bit client side ) runs fine; if I try the same configuration with last YAME release, when I starts the client side have the error “this is not a WIN32 application” .
But sure I am doing some type of error that I don’t understand…:(In each case my congratulations, YAME SUITE is a great work .
-
Thank for your answer People, but obviously my english in not good: I’ll try to explain it again:
- Falcon BMS runs on a WIN 10 64 bit PC and on this PC runs YAME SERVER 64bit version;
- on another PC runs WIN XP 32 bit and ON THIS PC runs YAME CLIENT 32bit version;
- the two PCs are LAN connected.
The previous version of YAME ( 64 bit server side, and 32 bit client side ) runs fine; if I try the same configuration with last YAME release, when I starts the client side have the error “this is not a WIN32 application” .
But sure I am doing some type of error that I don’t understand…:(In each case my congratulations, YAME SUITE is a great work .
if you run yame32 on the 64 bit machine it works?
-
Need help here,guys!
Windows 10 64bit system,yame64 1.2.1installed.
After yame start,lag appears at my monitors,both of them.However,everything ok with windows 7.How to fix it?Thx a lot! -
Need help here,guys!
Windows 10 64bit system,yame64 1.2.1installed.
After yame start,lag appears at my monitors,both of them.However,everything ok with windows 7.How to fix it?Thx a lot!check if you have selected masked or antialiased window in yame. if so disable those configurations
-
check if you have selected masked or antialiased window in yame. if so disable those configurations
Problem solved~!Thank you,bro!
However,if I use the “Launch Falcon BMS” bar to start ,the in game resolution will drop and cant be adjusted.BMS short cut click,everythind goes fine.Any suggestion? -
Problem solved~!Thank you,bro!
However,if I use the “Launch Falcon BMS” bar to start ,the in game resolution will drop and cant be adjusted.BMS short cut click,everythind goes fine.Any suggestion?this seems related to the “full screen optimization” problem.
-
this seems related to the “full screen optimization” problem.
OK~It seems solved!THX again!:D
-
I did a fresh install of BMS and a new install of Yame64 v 1.2 64 bit on a Windows 7 Pro 64 bit system. I also have the VisualStudio 2015 redistributable files installed (both X86 and X64). When I run Yame64 (admin) it crashes with a dialog box.
Problem signature:
Problem Event Name: APPCRASH
Application Name: YAME64.exe
Application Version: 0.0.0.0
Application Timestamp: 59afa99e
Fault Module Name: ucrtbase.DLL
Fault Module Version: 10.0.14393.2247
Fault Module Timestamp: 5adc1d0b
Exception Code: c0000005
Exception Offset: 000000000000fab4
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 2021
Additional Information 2: 2021a6bb3b4d9c0739b3679462c5732e
Additional Information 3: d2d1
Additional Information 4: d2d151e1c83a1b403a9d1e6e8aabbb4dAny ideas as to why this is crashing? There was no log files
-
I did a fresh install of BMS and a new install of Yame64 v 1.2 64 bit on a Windows 7 Pro 64 bit system. I also have the VisualStudio 2015 redistributable files installed (both X86 and X64). When I run Yame64 (admin) it crashes with a dialog box.
Problem signature:
Problem Event Name: APPCRASH
Application Name: YAME64.exe
Application Version: 0.0.0.0
Application Timestamp: 59afa99e
Fault Module Name: ucrtbase.DLL
Fault Module Version: 10.0.14393.2247
Fault Module Timestamp: 5adc1d0b
Exception Code: c0000005
Exception Offset: 000000000000fab4
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 2021
Additional Information 2: 2021a6bb3b4d9c0739b3679462c5732e
Additional Information 3: d2d1
Additional Information 4: d2d151e1c83a1b403a9d1e6e8aabbb4dAny ideas as to why this is crashing? There was no log files
please give more infos of what your system is and what configuration of yame you are using. if you want you can even post your layout and yame64.xml config files