YAME64 suite
-
Thanks, it works perfectly It was just curiosity.
Best regards.
-
Hi Roccio,
I am trying to use YAME32 Client on Windows XP, but It does not work: do you have advices?Thank You in advance.
Mauro
-
Found this on the min requirements on the BMS home page. Win XP support was dropped in 4.33 Update 3–only Update 1 and 2 will work on XP. This was due to future requirements and lack of OS support.
-
Hi Roccio,
I am trying to use YAME32 Client on Windows XP, but It does not work: do you have advices?Thank You in advance.
Mauro
what is the problem? and the system spec? and are you running yame as a network client or this xp pc is your falcon bms pc?
-
Hi Roccio,
Falcon BMS runs on win10 64 bit, and on this pc also runs YAME 64 Server. On an old netbook Asus eeepc900 with win XP SP3 runs YAME32 like client. The two pc are connected using LAN. previous version of YAME runs very well, but the last version does not run: when I start that, winxp says me that it is not a win32 application.Best Regards
-
Errrr yame64 doesn’t mean a 64bit application?
U can’t run s 64bit app on a 32bit operating system.Sent from my MI 5 using Tapatalk
-
Yame offers both 64 and 32 bit version.
Make sure you use the 32bit exe for your xp pc. -
Thank for your answer People, but obviously my english in not good: I’ll try to explain it again:
- Falcon BMS runs on a WIN 10 64 bit PC and on this PC runs YAME SERVER 64bit version;
- on another PC runs WIN XP 32 bit and ON THIS PC runs YAME CLIENT 32bit version;
- the two PCs are LAN connected.
The previous version of YAME ( 64 bit server side, and 32 bit client side ) runs fine; if I try the same configuration with last YAME release, when I starts the client side have the error “this is not a WIN32 application” .
But sure I am doing some type of error that I don’t understand…:(In each case my congratulations, YAME SUITE is a great work .
-
Thank for your answer People, but obviously my english in not good: I’ll try to explain it again:
- Falcon BMS runs on a WIN 10 64 bit PC and on this PC runs YAME SERVER 64bit version;
- on another PC runs WIN XP 32 bit and ON THIS PC runs YAME CLIENT 32bit version;
- the two PCs are LAN connected.
The previous version of YAME ( 64 bit server side, and 32 bit client side ) runs fine; if I try the same configuration with last YAME release, when I starts the client side have the error “this is not a WIN32 application” .
But sure I am doing some type of error that I don’t understand…:(In each case my congratulations, YAME SUITE is a great work .
if you run yame32 on the 64 bit machine it works?
-
Need help here,guys!
Windows 10 64bit system,yame64 1.2.1installed.
After yame start,lag appears at my monitors,both of them.However,everything ok with windows 7.How to fix it?Thx a lot! -
Need help here,guys!
Windows 10 64bit system,yame64 1.2.1installed.
After yame start,lag appears at my monitors,both of them.However,everything ok with windows 7.How to fix it?Thx a lot!check if you have selected masked or antialiased window in yame. if so disable those configurations
-
check if you have selected masked or antialiased window in yame. if so disable those configurations
Problem solved~!Thank you,bro!
However,if I use the “Launch Falcon BMS” bar to start ,the in game resolution will drop and cant be adjusted.BMS short cut click,everythind goes fine.Any suggestion? -
Problem solved~!Thank you,bro!
However,if I use the “Launch Falcon BMS” bar to start ,the in game resolution will drop and cant be adjusted.BMS short cut click,everythind goes fine.Any suggestion?this seems related to the “full screen optimization” problem.
-
this seems related to the “full screen optimization” problem.
OK~It seems solved!THX again!:D
-
I did a fresh install of BMS and a new install of Yame64 v 1.2 64 bit on a Windows 7 Pro 64 bit system. I also have the VisualStudio 2015 redistributable files installed (both X86 and X64). When I run Yame64 (admin) it crashes with a dialog box.
Problem signature:
Problem Event Name: APPCRASH
Application Name: YAME64.exe
Application Version: 0.0.0.0
Application Timestamp: 59afa99e
Fault Module Name: ucrtbase.DLL
Fault Module Version: 10.0.14393.2247
Fault Module Timestamp: 5adc1d0b
Exception Code: c0000005
Exception Offset: 000000000000fab4
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 2021
Additional Information 2: 2021a6bb3b4d9c0739b3679462c5732e
Additional Information 3: d2d1
Additional Information 4: d2d151e1c83a1b403a9d1e6e8aabbb4dAny ideas as to why this is crashing? There was no log files
-
I did a fresh install of BMS and a new install of Yame64 v 1.2 64 bit on a Windows 7 Pro 64 bit system. I also have the VisualStudio 2015 redistributable files installed (both X86 and X64). When I run Yame64 (admin) it crashes with a dialog box.
Problem signature:
Problem Event Name: APPCRASH
Application Name: YAME64.exe
Application Version: 0.0.0.0
Application Timestamp: 59afa99e
Fault Module Name: ucrtbase.DLL
Fault Module Version: 10.0.14393.2247
Fault Module Timestamp: 5adc1d0b
Exception Code: c0000005
Exception Offset: 000000000000fab4
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 2021
Additional Information 2: 2021a6bb3b4d9c0739b3679462c5732e
Additional Information 3: d2d1
Additional Information 4: d2d151e1c83a1b403a9d1e6e8aabbb4dAny ideas as to why this is crashing? There was no log files
please give more infos of what your system is and what configuration of yame you are using. if you want you can even post your layout and yame64.xml config files
-
from the manual
New in 1.2 is the autodetection of the BMS location, user DTC (used to retrieve steerpoint s & preplanned
threat circles) and keyfile (used by the callback server to send the correct key to BMS, and for the touchable
zones on the bezels/gauges), and theater (for the CP60 moving map).
If you have multiple BMS versions installed on the same pc, you can set desired BMS version.I do have multiple BMS versions installed but, only one of them show up in the drop down box on the global page.
Is there somewhere that I can add these in manually?
-
from the manual
I do have multiple BMS versions installed but, only one of them show up in the drop down box on the global page.
Is there somewhere that I can add these in manually?
not for now. yame search installed bms on the registry, so normally it will find only the “main” installation.
in your case how do you have many installations? and how do you run one or another?
maybe i can add something for the next yame update -
Hi Roccio,
I install and run same YAME32 on a Windows7-64 bit and it works fine.
But when I try to do the same on WindowsXP, I install YAME32 successly, but then it doesn’t run. This is the error. The virtual machine runs on the same Win7 pc.Bye
-
Hi Roccio,
no idea about my problem? Someone uses Yame64 32bit Client on a WinXP S.O.?Thank You in advance